[MOMOSAM]

Hello to all,

I have install 2018.5 OpenShell on the 4 different laptops all wor fine except one. On the DAS I always get same error message. I have never seen before this erro: Can anyone have solution for this.

Thans in advance.

Connect to the car using XENTRY and report back what happens then

[lollo54]

if possible help in a error cal 870

i use win 7 32bit prof
I followed the procedures written on your guide
the program starts correctly
in DAS, after connected to the vci bloched by error cal 870
I tried in different ways
maybe it's me wrong step 12

12. das 870 error fix
purpose: avoid error 870 in das. use when needed only.

I tried to replace the file but the problem got worse
if you can give me some advice I thank you

[consigliere3]

Hello to all,

I have install 2018.5 OpenShell on the 4 different laptops all wor fine except one. On the DAS I always get same error message. I have never seen before this erro: Can anyone have solution for this.

Thans in advance.

Connect to the car using XENTRY and report back what happens then

Same error message

[MOMOSAM]

Hello to all,

I have install 2018.5 OpenShell on the 4 different laptops all wor fine except one. On the DAS I always get same error message. I have never seen before this erro: Can anyone have solution for this.

Thans in advance.

Connect to the car using XENTRY and report back what happens then

Same error message

PM me I mate be able to fix it by TV

[Rik]

uau pesona this is a really kill tutorial for all of us understand all the complex xentry is.
Just one add:
Link HHT-Win from DAS:
You need to put this file on C:\Program Files\Mercedes-Benz\DAS\trees\pkw\programm\hht_link

[isma123]

hello,
my install goes smoth

i can connect w211 with das and SD4
but with xentry and w204 impossible to connect i get error on asam.gmx

who can help ,

[pesona]

hi,
your information is very limited.
when get errors using sdconnect, it has many probable causes.
please do sdconnect selftest, and upload it here. hope someone is able to solve your problem.

[kst16899]

@pesona

Thank you very much for your XDOS installation guide.

I have installed XDOS 2018.03 on win8.1 x64 and it works great with C4 SDconnect SN:101044.

Thank you very much again!

Have a nice day!

[argenta]

Hello pesona,
the two files contained in the Xentry_Blacklist fix.rar are dated back in 2011 and 2012...

Are they still valid even for 05/2018 Xentry? If yes, after the copy... do we have to put them in read-only mode? Or just copy in place?

Thanks.

[jurek1980]

@argenta
Files are old but valid. Just put them in the mantioned path.