[motorotor]

Wallpaper_072018

[hsw1009]

Hi Sir:

Sorry for off-topic.
Could we use J2534 passthru devices to work with DTS Monaco 8 or VEDIAMO ?
(For offline SA code add/delete)

Thanks.

@hsw1009
for Win10x64, it is one of the recommended system requirements by Mercedes. but maybe there is some obstacle(s) but a member wrote in this thread that he could handle it as well.

xentry xdos: xentry diagnosis for 12/24v using partd aka C3 (obsolete), sdconnect aka C4, ecom, xentry connect aka xentry kit 2, and bosch vci aka xentry kit 3

xentry passthru EU or USA: xentry diagnosis using J2534 passthru devices e.g: mercedes passthru vci (12/24v), avdi, vas5054a (12v), drewtech MongoosePro (12/24v) and many other J2534 compatible devices.

[pesona]

@hsw1009
that's not oot mate.
that's a feature that have to be tested too.

[consigliere3]

I can not read cars from 2010 to newest with 2018.7 and 2018.5 xentry xdos does anyone have same problem?

[MilenaG]

@consigliere3
Everythig works perfect with 2018.7 and 2018.5. What kind of error do you have when you try to connect for the car?

[Wizen]

Hello,
my XDOS PassThru with VAS5054A does not work with W212. Does one know why? With older vehicles over DAS it goes ..
THX

[sab2012]

i have actia multidaig VCI 2011 chines clone does it work with the XENTRY Pass Thru version ?

[pesona]

@sab2012

crazy40 gave good feedback for actia too. look post #268

[MilenaG]

@Wizen
If you use Win 32 bit than W212 will not work. You must install Win 64 bit and all will work perfect. For Vas drivers on 64 bit system search Roturbo thread on this forum.

[motorotor]

Wallpaper_092018