[odeh999]

Hello,
can someone help me ? I have Xentry 12.2017 Passthru and i need 2221 45 Fix for it. Can i use a newer one , or can somebody give me the link ??

Regards

[pesona]

@odeh999

Read the how to 2221-45 error fix for 2018-12 (2018-xx).and create for yourself 2221-45 fix for xd passthru 2017-12 .
Good luck

[bmw7cc]

XENTRY XDOS 2018.11, How to fix md5 error?Thanks

[apple]

I have an exclamation mark on display adapter intel hd4000 in device manager and FN+ to increase and decrease the monitor dim bright dont work.
My laptop is a Lenovo X230 and none of the KB4093118 and KB4103718 updates are installed!!

Hi. Go to Start and in search box type msconfig . Go to boot section and tick No GUI boot, apply, ok.

This is a solution that works for 2-3 next restarts of the OS and after this you will come up with "RUNTIME ERROR" for the DAS program which it starts the diagnostic session and at the end of it and when it measures the battery voltage the program crashes and it shuts down.
The problem is that if you revert the "msconfig" and you bring back to original state the problem remains there no matter what you do.
So to me this is NOT a solution.
IF i am wrong please correct me mate.

[Rik]

I have an exclamation mark on display adapter intel hd4000 in device manager and FN+ to increase and decrease the monitor dim bright dont work.
My laptop is a Lenovo X230 and none of the KB4093118 and KB4103718 updates are installed!!

Hi. Go to Start and in search box type msconfig . Go to boot section and tick No GUI boot, apply, ok.

This is a solution that works for 2-3 next restarts of the OS and after this you will come up with "RUNTIME ERROR" for the DAS program which it starts the diagnostic session and at the end of it and when it measures the battery voltage the program crashes and it shuts down.
The problem is that if you revert the "msconfig" and you bring back to original state the problem remains there no matter what you do.
So to me this is NOT a solution.
IF i am wrong please correct me mate.

For me desinstalling KB4.... windows updates and msconfig No GUI boot off solved this issue.

[etronic]

I have a problem with communication with SDConnect after applying all patches to clean install of 9.2018. Toolbox shows it and I can test it but when I launch Xentry and try to communicate with car I get "communication error (1.2)"

Any fixes for that?

[W123]

I have a problem with communication with SDConnect after applying all patches to clean install of 9.2018. Toolbox shows it and I can test it but when I launch Xentry and try to communicate with car I get "communication error (1.2)"

Any fixes for that?

Did you reapply blacklist file and ensure correct location?

[etronic]

I have a problem with communication with SDConnect after applying all patches to clean install of 9.2018. Toolbox shows it and I can test it but when I launch Xentry and try to communicate with car I get "communication error (1.2)"

Any fixes for that?

Did you reapply blacklist file and ensure correct location?

I did and it is not even trying to communicate with mux. It's like on of software libs is broken

[sabian]

    Hi my friends I install xentry passthru 05.2018,with vas 5054a the divers is ok and when I try to diagnose mb e class 211, ml163 I always have this error:
The error is Fault (1.2)-2.503.9901
Initialization of diagnosis multiplexer failed

I mention that I never succes connect to any car. Could someone please help?

[bimmer71]

hi
i applied the starkey patch to my windows registry (win10 64bit). but key generated with keygen is still not accepted in configassist. keeps saying "Provided StartKey is invalid"

can anyone please help? thanks!

RUN AS ADMIN ON REG PATCH