Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
XENTRY XDOS & PassThru how to install for dummies
19-11-2018, 18:59 PM,
Post: #411
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
Hi. Can anyone assist with Xdos 2017.12.
I loaded it successfully on windows 10 64 bit. Laptop was running slow with every thing else being on it . So I decided to restore window 10 to factory reset. Reloaded Xdos2017.12 and ever since than my "provided starkey is invalid" for configassist. Is there a specific date the system should be on before loading Xdos 2017.12 I cannot seem to change the operating system on this Dell laptop even after changing boot mode to legacy, so I am stuck with this operating system. |
|||
20-11-2018, 12:29 PM,
Post: #412
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
(19-11-2018, 15:53 PM)W211 Wrote:(16-11-2018, 20:25 PM)ftanha Wrote: Hi, if you found any solution please share. I retried by fresh installing my windows 7 Ultimate on my dell inspiron n5050 re initiate the xdos installation but ended with the same problem. |
|||
20-11-2018, 13:09 PM,
Post: #413
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
I have the latest xentry 12.2018 but the xentry connect does not connect. it does not appear in the sd connect tool. on xentry connect is bd 9/2017 ... it's an xentry connect c5. where is the problem?? xentry does not recognize the device via cable and wifi
is supported with the new xentry 12/2018 only sd connect and vci? |
|||
21-11-2018, 20:33 PM,
Post: #414
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
(20-11-2018, 12:29 PM)ftanha Wrote:(19-11-2018, 15:53 PM)W211 Wrote:(16-11-2018, 20:25 PM)ftanha Wrote: Hi, Problem solved! I just want to post here because I think someone can have the same problem as mine. At first I tried with windows 7 ultimate which gave me the error message. Then I changed my windows to 7 pro sp1 and it worked And many thanks to @[b]pesona [/b]for his helpful post |
|||
Reputation: +1 - pesona [+1] | |||
24-11-2018, 10:25 AM,
Post: #415
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
Ok, f6 call wis from xentry 12-2018 is now working.
Tested on w7/10 x64 Many thanks @persona https://www.youtube.com/watch?v=Lm4LP0C4Kw8 |