[hippy]

Thanks for such a great right up. Since this software install I can no longer install any drivers for usb devices, it's windows 10 64bit. Xentry runs perfectly just no drivers for the j2534 cable and I can't I stall them.
Can anyone help?
Thanks
Hippy

[pesona]

Friend, this is a great instruction, thanks !!!!
maybe you have Xentry Special Functions Calculator??

@kmfspb  jinoweb and raidraid both of them sell xentry sf calculator in marketplace. i have it but i don't have the free version yet.

Thanks for such a great right up. Since this software install I can no longer install any drivers for usb devices, it's windows 10 64bit. Xentry runs perfectly just no drivers for the j2534 cable and I can't I stall them.
Can anyone help?
Thanks
Hippy

@hippy windows 10 x64 brings many headaches indeed. btw, what j2534 cable that you have?

[xhead]

Have you tried booting Win10 with "driver signature check off" and then install the j2534 driver?

[hippy]

@pesona

Thank you very much for your XDOS installation guide.

I have installed XDOS 2018.03 on win8.1 x64 and it works great with C4 SDconnect SN:101044.

Thank you very much again!

Have a nice day!

Friend, this is a great instruction, thanks !!!!
maybe you have Xentry Special Functions Calculator??

@kmfspb  jinoweb and raidraid both of them sell xentry sf calculator in marketplace. i have it but i don't have the free version yet.

Thanks for such a great right up. Since this software install I can no longer install any drivers for usb devices, it's windows 10 64bit. Xentry runs perfectly just no drivers for the j2534 cable and I can't I stall them.
Can anyone help?
Thanks
Hippy

@hippy windows 10 x64 brings many headaches indeed. btw, what j2534 cable that you have?

Hi I have the cheap mini-vci from eBay that is bundled with the Toyota software. I also have a tactrix cable for my Subaru that is j2534 enabled.
I agree windows 10 is a royal pain. It won't I stall any drivers any more even printer drivers !
Other than that the xentry is perfect

---

Have you tried booting Win10 with "driver signature check off" and then install the j2534 driver?

Thanks man, I think I did try that but I will double check that to be sure.
Cheers

[Piktas]

Did a clean install of Win10 64 bit and new version of Xentry Diagnostics PassThru (09.2018), but still can't see CDI unit.
Somebody please help to solve this problem.
Everything works well except the CDI unit.
The cable is MiniVCI J2534.

[hippy]

I just bought a fresh windows 7 service pack 1 64bit laptop, installed my tactrix and my j2534 mini-vci driver's, installed xentry perfect but....
When it starts I get the adapter select drop down and I can choose either cable driver and the software loads without error but when I plug it in I still don't get any connection to the ecu I get a connection error
Any ideas?
I gave up on win10 it's crap

[barantk1]

I have read the whole subject and do not believe what is happening here but I will ask for certainty because I am in the school.
IS THE XENTRY SOFTWARE OPERATING WITH THE VAS5054A HEAD ??? ?? ?? ??

[pesona]

@Piktas & @hippy  i hope you can find a way with MiniVCI J2534 & tactrix.
@barantk1  many members write that xentry passthru is okay with VAS5054A. Read Roturbo's post and his 64 bit driver for VAS5054A

i myself use Dell latitude win7x64 PRO, chipsoft mid (usd131) and pro (usd218) as my adventure with xentry passthru. i chose chipsoft because it can handle 24v (max 35v). i bought the famous VAS5054A (usd 60) too but don't touch it yet because it can't handle 24v (max 17v). i guess chipsoft lite (usd89) is worth to try too.

PKW (passenger car & van 12v)
i test it at a glance with xentry and das, all are easy, direct and good result.

xentry: w212, w204

das:  sprinter, w220, w221

Truck (Actros 2,3), Axor & Bus OHXBC, OC500 24v
Notes:
i try with unsupported DAS vehicles in xentry passthru (Lkw, Bus k-line).
I add the folders that is not installed with xentry passthru and take it from xdos with same release.
i am help by Denis (owner and developer of chipsoft). He is a savant. 
He helps update the drivers several time to help me to achieve what i want.
The first driver when i get, it does not work with xentry/das and vediamo for mercedes vehicles 24v.

Pro:
- Actros: All ecu are okay but not GM. Still under research but i am already boring right now.
- Axor MB INA (all k-line ecu): Great working now
- Bus OHXBC, OC500 (all k-line ecu): at last, all are great now

Cons:
- device insulation is not good. i already burn one mid and one pro.
  i don't think it is good for a long term use for 24v unless Denis want to add that protection.

Comparing with partD (C3) and SDConnect
- the price (almost the same)                      -
- fully compatibility with all mb vehicles       ---
- Reliability with 24v                                  ---
- Size & weight                                         +++++
- Support other Brands                              +++

[filipe08]

The VAS5054 works fine for me but he doesn't work for w203, any idea ? (32 or 64 bits same issue)

[MilenaG]

@pesona, chipsoft lite works perfect with xentry pt, especially after updating drivers for device.

---

@filipe08, xentry pt works only with can modules, it is not possible with k-line.