Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

XENTRY XDOS & PassThru how to install for dummies
11-12-2018, 09:47 AM,
Post: #461
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
Hi, I followed the tutorial and the installation went smooth.
Can start Xentry but if it comes to diagnosis the following error pops up:

UNABLE TO FIND ENGLISH THESAURUS FILE IN C:\PROGRAM FILES (x86)\MERCEDES BENZ\DAS\THESAUR\002\THESAUG.DBZ! DAS WILL EXIT!

And, indeed, there is no "THESAUR"-directory in DAS!

How can I fix this?

Maybe someone can put the thesaur-files online?

Thanks for your help!

Using Passthru on Win7 x64

Automatic vehicle recognition doesnt work either.
Quote this message in a reply
11-12-2018, 10:35 AM,
Post: #462
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
I would start fresh again,looks like a corupt download or bad install.

W223 W206
Xentry  Ecom/C6/Sd C4 Help HHT native on 64x windows WIS 2021
AMG Menu
Anti-Theft Pin
Navigation Map Pin 
Quote this message in a reply
[+] 1 user says Thank You to ross2018 for this post
11-12-2018, 10:48 AM,
Post: #463
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
Hm...  thinking But it didnt throw any errors during install...

I'll give it a try...

Thanks!
Quote this message in a reply
13-12-2018, 07:53 AM,
Post: #464
YTMercedes  RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
Someone who know what is wrong worried  DAS working well but not Xentry, Xentry find the car and seems to work well but then suddenly it not feel if the ignition is ON or OFF, I manually set the ignition to ON and then I get this error (see pictures). I  have run self test on the C4 and only error was on the battery and I have replace to new one.

Windows 10 64bit
SDconnect C4
XENTRY Diagnostics OpenShell_18.12.5 with PassThru


Attached Files Thumbnail(s)
               
Quote this message in a reply
13-12-2018, 08:22 AM,
Post: #465
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
I had a similar problem but in my case, it was the obd cable if your das is working ok maybe is a corrupt installation or you didn't apply all the fixes.

W223 W206
Xentry  Ecom/C6/Sd C4 Help HHT native on 64x windows WIS 2021
AMG Menu
Anti-Theft Pin
Navigation Map Pin 
Quote this message in a reply
13-12-2018, 08:29 AM,
Post: #466
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
I have tried with 3 different cables, and I think I have apply all fixes but I will check again.
Quote this message in a reply
13-12-2018, 13:32 PM,
Post: #467
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
Have gone through the fixes and no corrupt installation, but still the same, someone who knows what it can be?
Quote this message in a reply
13-12-2018, 13:47 PM,
Post: #468
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
probably it is a hardware (sdconnect) failure mate.
if das works, what das vehicle that you diagnose?
you need to test das vehicle that read ignition from CAN.
you can try w204 with das. if das gets ignition error too, it is definitely a bad sdconnect.
Quote this message in a reply
[+] 1 user says Thank You to pesona for this post
13-12-2018, 21:45 PM,
Post: #469
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
can someone help me? i have installed xentry passthru as described, and it works good, but i am trying to connect to a w220 2000 s class, so xentry changes over to DAS. the tool i am using is a VCX nano 5054 for VW. the tool connects to the car reads the VIN and voltage, when i try to access a module i keep getting.

" initialization of diagnosis multiplexer failed. possible cause :{ diagnostic system data sectors are incompatible or faulty. please contact the user help desk."

i have reset computer and retested. tried various drivers but will not go any further.

the tool is connected via a wifi hotspot, and i do notice the voltage drops out every so often and returns. but do you think that tool is the issue or a software fault?
Quote this message in a reply
14-12-2018, 01:19 AM,
Post: #470
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
(13-12-2018, 21:45 PM)aholmes28191 Wrote:  can someone help me? i have installed xentry passthru as described, and it works good, but i am trying to connect to a w220 2000 s class, so xentry changes over to DAS. the tool i am using is a VCX nano 5054 for VW. the tool connects to the car reads the VIN and voltage, when i try to access a module i keep getting.

" initialization of diagnosis multiplexer failed. possible cause :{ diagnostic system data sectors are incompatible or faulty. please contact the user help desk."

i have reset computer and retested. tried various drivers but will not go any further.  

the tool is connected via a wifi hotspot, and i do notice the voltage drops out every so often and returns. but do you think that tool is the issue or a software fault?

VCX nano must always use latest firmware & driver j2534?, have you updated firmware & driver & have Vxmanager installed ?, and try connect with the VCX cable, also disable or remove antivirus - it interferes with VCX nano

firmware updates did solve some issues for me

VCX partial firmware update fixes below

# VCX Firmware Update History


================================================================================
## 2018.11.30 v1.4.10.0
------------------------------------------
* Fix ISO15765 flow control frame send error.
* Fix CAN2 driver control process.
* Add V83 new hardware bus switch(Read OBD Pin Voltage).
* Fix J1708 pin initiation.
------------------------------------------

================================================================================
## 2018.05.10 v1.4.4.0
------------------------------------------
* Fix BENZ C6 CAN Bus KL15 signal filter
* Fix BENZ C6 MBISO 5BPS initialization
------------------------------------------


================================================================================
## 2017.12.04 v1.4.2.0
------------------------------------------
* Fix HS-CAN error when multiple channel working (JLR).
------------------------------------------



================================================================================
## 2017.11.07 v1.4.1.0
------------------------------------------
* Fix J1939 protocol error for CUMMINS CM850.
------------------------------------------



================================================================================
## 2017.09.17 v1.4.0.0
* Add Expasion DoIP device information sync with VCX.
------------------------------------------



================================================================================
## 2017.09.05 v1.3.6.0
* Optimize CAN PS switch logic.
* Optimize TP20 protocol for J2534.
* Fix KW1281 reset to IDLE when tx error.
------------------------------------------



================================================================================
## 2017.08.26 v1.3.5.0
* Fix v1.3.4.0 error for CAN OBD12/13.
------------------------------------------



================================================================================
## 2017.08.23 v1.3.4.0
* Fix CAN lost data in callback when multi channel scanning(PORSCHE).
* Fix CAN block filter do not set to hardware.
* Add J1850 VPW and PWM switch(PB3).
------------------------------------------



================================================================================
## 2017.07.04 v1.3.3.0
## 2017.07.01 v1.3.2.0
* Fix CAN frame queue crash when receive large amount data(BENZ).
* Optimize CAN rx handler and FIFO.
* Optimize CAN reinit.
* Optimize CAN filter overflow.
------------------------------------------

================================================================================
## 2017.06.07 v1.3.1.0
1. Fix SWCAN error for GM GDS2.
2. Fix CAN filter clear.


================================================================================
## 2017.05.22 v1.3.0.0
1. Modify CAN hardware filter for multiple channel(for BENZ).


================================================================================
## 2017.05.19 v1.2.3.11
1. Fix OBD pin voltage read for new VCX-PRO device.


================================================================================
## 2017.04.18 v1.2.3.10
1. Fix ISO15765 standard extend addr error.
2. Fix CAN baud 800k error.


================================================================================
## 2017.02.10 v1.2.3.6
1. Fix TP20 Channel Setup ID dynamically alloc.


================================================================================
## 2017.01.20 v1.2.3.5
1. Fix ISO15765 free protocol_buf after rx segment message break.


================================================================================
## 2016.12.22 v1.2.3.4
1. Fix BMW_KCAN extend address update automatic.


================================================================================
## 2016.12.06 v1.2.3.3
1. Remove IDE bit from CAN filter


================================================================================
## 2016.12.02 v1.2.3.2
1. Fix BMW_KCAN extend address(TX and RX different).


================================================================================
## 2016.10.17 v1.2.3.1
1. Fix OPEL KW82 protocol for GM Tech2Win.


================================================================================
## 2016.10.13 v1.2.3.0
1. Fix ISO15765 recv error when RAW CAN message mixed.


================================================================================
## 2016.07.21 v1.2.2.9
1. Fix TP20 Channel request RX ID start from 0.


================================================================================
## 2016.07.08 v1.2.2.8
1. Add timer message PTIMER_FLAG_TX_INST.
2. Fix 29bit CAN ID filter.
3. Fix KW1281 protocol timer when idle.
4. Add TP20 can bus loopback message.
5. Fix some error.


================================================================================
## 2016.05.03 v1.2.2.4
1. Fix ISO15765 receive message as ISO15765 when Filter OFF.


================================================================================
Reputation: +1 - pesona [+1]
Quote this message in a reply
[+] 4 users say Thank You to wakawaka for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
YTMercedes Xentry New Long Key (original key) 1st web free service pesona 1,584 147,843 26-03-2024, 20:25 PM
Last Post: Delphi2002
YTMercedes HHT-Win 64bit With Xentry XDOS 2023.03 One Click JackyTran 6 1,551 26-03-2024, 16:21 PM
Last Post: Djkalash
YTMercedes New 2024 xentry KG? Rik 8 1,269 26-03-2024, 11:47 AM
Last Post: ocostel
YTMercedes How to Install Xentry PassThru 03.2022 Flawlessly margut 1 1,621 23-03-2024, 15:29 PM
Last Post: head
YTMercedes Xentry Passthru 06.2023 J2534 Openport VCX + Keygen pitercie 2 457 23-03-2024, 15:29 PM
Last Post: head
  Xentry 2024.03 - PT & XDOS renia1983 19 2,070 17-03-2024, 19:35 PM
Last Post: gcs190
YTMercedes XENTRY DAS Activation Here takis 2,422 617,794 15-03-2024, 10:24 AM
Last Post: Mario68
  03 2024 Xentry Final version ross2018 9 892 14-03-2024, 23:37 PM
Last Post: connector
YTMercedes XENTRY AIO FULL FIX [2023.09-R2 & 2023.12-R2] [UPDATED 21/12/2023] crypt0ninja 153 30,373 06-03-2024, 17:32 PM
Last Post: db8000
  Xentry 09/12.2021 WIFI Solution gcs190 11 4,807 29-02-2024, 13:33 PM
Last Post: gcs190

Forum Jump:


Users browsing this thread:
knuffe, 4 Guest(s)

Return to TopReturn to Content