[wakawaka]

[/quote]

I will check for latest firmware on device, i am nearly sure is is up to date. and vxmanager is installed.

i am unsure how to update the driver, can you advise of the process?

Im not sure if this makes a difference but i run xentry though a VM running win7. on this machine i also have VW ODIS and JLR SDD, ODIS works 100% and SDD untested.

i cant use a cable as the middle of the USB is missing and the seller is AWOL(long story) but can successful access it via ip and and a mobile hotspot, i am currently trying to find someone local who can carry out the repair to the USB.

but essentially should the VCX nano support this application?
silly question but when you launch xentry do you use the VXDIAG J2534 driver?

thanks for your help, it seems there is not a hell of a lot of information about VCX nano to reference
[/quote]

there is zero detail info on VCX Nano & they never reply or respond to you.
I will pm you link for latest driver


# VCX Passthru Driver Update History


================================================================================
## 2018.09.26   v04.04.180926
------------------------------------------
* Fix XXX_PS protocol communication with Pin6/Pin14(SGM RDS).
------------------------------------------


================================================================================
## 2018.08.24   v04.04.180824
------------------------------------------
* Fix PassthruConnect reinitialize period message count (GM SWCAN Programming J2534_ERR_EXCEED_LIMIT).
------------------------------------------

================================================================================
## 2017.11.01   v04.04.171101
* Fix K-LIne UART configuration(BIT,PARITY).
* Add TP20 protocol.
* Add UART_ECHO_BYTE_PS protocol.
* Fix ISO15765 CAN pad byte error.
* Fix some other error.

================================================================================
## 2017.06.20   v04.04.170620
1. Fix passthru lic for DASR2.

================================================================================
## 2017.03.22   v04.04.170322
1. Fix crash when call readmsg after disconnect(Benz).
2. Add UART parity and data_bits config for ISO9141/14230.

================================================================================