[krazzdav]

my friends, I installed xentry passtruh 12.2018 on the win7 x64 opscayjnym, the computer is dell e6420 i5 4gb ram. I have a problem now because I do not know which head to use with passtrokes. I have vas5054a or toyota vci heads ?? which is better to use, on which head will it sticky ?? Please help me thanks thanks and rep

I will also add that I have not yet installed the drivers for the passtries device, but when I include xentry I have two errors:
1- fatal erroe 104 there is no sae j2534 configuration available
2 - error 1: SelectPTDevice could not be started

please help

I used toyota mvci and worked fine. 
Run the xhorse mvci driver install then open your device's com port settings in device manager and make sure the cable is recognized after rebooting. If it is not recognized and has error you need to update driver on device manager and point to toyota driver you just installed. I had to do this 2 times pointing to the driver as there are 2 parts. 

After you verify you can see the cable then run xentry it should give you an option to select the passthru device.