Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
XENTRY XDOS & PassThru how to install for dummies
30-01-2019, 17:52 PM,
Post: #581
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
krazzdav
but what patches did you install ?? I did not install any patches but I installed to step 10 and that's it. Are the patches necessary for proper xentry operation ?? (29-01-2019, 21:15 PM)bradsbadluck Wrote: yesterday i struggle to set up mini-vci (clone version) as it not seeing car in xentry. i was getting communication error. solution is to create directory c:\temp\mvci and copy dill file i have included in archive in attachment and run the reg file. it was the function library (dll file) was not seen by the drivers for the cable. thus giving a communication error. after i did this now xentry working fine work mini vci. i hope this solution fixes the problems for some who have my problem. changing com port 2 to will do nothing and is not a solution. only will help if other device is trying to share same com port. I do not have any communication error, just go to the window where I want to connect with the car and stop there and nothing happens. Thank you, apomysl, I was thanked and rep and I'm fixing your patch |
|||
30-01-2019, 19:29 PM,
Post: #582
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
(30-01-2019, 17:52 PM)barantk1 Wrote: krazzdav Patches are included in steps 1-10 is all. So if you did all steps as you state through 10 then you also installed the required patches. |
|||
05-02-2019, 16:36 PM,
Post: #583
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
Can someone help me on starter key it says invalid key! I need help asap
|
|||
05-02-2019, 18:25 PM,
Post: #584
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
I assume you mean startkey, you have to install
4. install old keys loader for configassist and runf the .reg file then run ConfigAssist / configure click on the lock and use the Hardware ID to generate key using the old Key Generator. Click manual insert key and good to go. |
|||
05-02-2019, 20:14 PM,
Post: #585
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
hi can anyone help me when i run xentry diagnosis it pops up this error "fatal error(104) no SAE j2534 configuration is available" and after i press okay it shows another error like this " Error 1 selectPTDevice could not be started " if anyone knows the solution i would really appreciate it the file i installed is xentry pass thru from above link. thanks in advanced
|
|||
05-02-2019, 21:47 PM,
Post: #586
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
Hello!
I have MB A170cdi 2001. I bought Mini VCI cable from aliexpress. I have Xentry PassThru 2018 installed with all fixes on Win7 x64. Extracted msi XHorse driver to C:\temp\mvci. Applied registry fix. There is MVCI32.dll file at C:\temp\mvci pointed by FunctionLibrary registry key. And when I try to connect to A170 cdi 2001 I get error in DAS shown on image attached. When DAS loading ECUs the led on cable blinks several times. Can someone help me? Can I use minivci cable on this car? I don't have another MB car to try. P.S. Also I have cheap ELM327 bluetooth adapter and I can read live data (exept MAF flow) using TorquePRO. But I can't read DTCs and freeze frame data. Also I have VCX Nano (powered for VIDA) and I get same error in DAS like with this MINI VCI cable. |
|||
06-02-2019, 01:27 AM,
Post: #587
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
@sasayu1983
i don't use mini vci, but you almost succeed. btw, where is the floating ignition on/off? do you intentionally hide it? if not, try to copy global.sim to c:\programdata\mercedes-benz\csd\writefil\sim you can search global.sim in c:\program files (x86)\mercedes-benz\das\ |
|||
Reputation: +1 - Marcos [+1] | |||
06-02-2019, 02:16 AM,
Post: #588
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
Here is floating ignition window (attached pic). It differs if I run DAS from Xentry or standalone.
However I get same error: "Diagnostic system data sectors are incomplete or faulty" |
|||
06-02-2019, 18:11 PM,
Post: #589
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
How about genuine second generation VCI2 Actia Multidiag XS+ 2G? It covers J2534-1 and J2534-2. My supplier told me it works flawless. I am installing to try!
|
|||
07-02-2019, 14:07 PM,
Post: #590
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
Hi.
I tested VAS5054 + Xentry 12.2018 on my ML350 W164 Its all works good, all features and developer menu are available. I have only one question: To change ignition ON/OFF I used tool. Is this a Xentry not recognized when ignition are ON/OFF or adapter VAS5054 not recognized/supported this functionality? |
|||
Reputation: +1 - pesona [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
41 Guest(s)
41 Guest(s)
Return to TopReturn to Content