[grabbelmanko]

Hi,
Thanks on answer.
I install drivers from medianjoe but show error 41.
Any solution?
[/quote]

Hello Ivan,
where do you get Error 41?
Did you create the c:\temp directory?
You get a lot of funny mistakes if this is missing?
Any response in the softing configuration SW? Which colour does your dot show?
Check the pins for a the temporary power.

Check all the netframework versions in your installation. VC*++ also.


Keeping close to the instructions of medianjoe will guide you to the success.

Best regards & good luck
grabbelmanko

[ToNy68]

Hello,
Did anyone have problems with xentry passthru actiator test not working?
I use win7 64bit with vas 5054a and roturbo drivers.
Version is 12.2018.
Thanks in advance,
Ivan

Hello Ivan,

I have taken the drivers from medianjoe- here in this forum-  and also followed his instructions for the VAS5054.
No problem.
Just get straight ahead to the goal.

Best regards
grabbelmanko

Hi,
Thanks on answer.
I install drivers from medianjoe but show error 41.
Any solution?

I had the same error becauce I plug it to a non-Mercedes vehicule

What car are you testing ?

[ivkera82]

Hello,
Did anyone have problems with xentry passthru actiator test not working?
I use win7 64bit with vas 5054a and roturbo drivers.
Version is 12.2018.
Thanks in advance,
Ivan

Hello Ivan,

I have taken the drivers from medianjoe- here in this forum-  and also followed his instructions for the VAS5054.
No problem.
Just get straight ahead to the goal.

Best regards
grabbelmanko

Hi,
Thanks on answer.
I install drivers from medianjoe but show error 41.
Any solution?

I had the same error becauce I plug it to a non-Mercedes vehicule

What car are you testing ?

For me this drivers not working, because wont install drivers in device manager for vas 5054a.
I get error code 51 in device manager.
I test on mercedes vehicle.
I dont know where i mistake.

[grabbelmanko]

Hello Ivan,

the drivers of medianjoe works perfect. I can assure this.

Did you install the Softing Configuration SW? As Medianjoe describes this in his instructions?

When you are using this SW:

Do you get connection to your VAS device using this SW?
Which colour does the dot in the SW have?
Did you use the correct pins in  the OBD-Plug for the temporary power supply?

Did you deinstall all your old drivers from earlier installations of you?

Because oft he perfect instructions of medianjoe I never check or use the device manager.
When is the dm showing the error 41 or 51?

Did you follow the instructions in the so called preinstallation?
Have you read the posting of midianjoe right below the big posting? Concernng the edic drivers?

br & good luck
grabbelmanko

[ivkera82]

Hello Ivan,

the drivers of medianjoe works perfect. I can assure this.

Did you install the Softing Configuration SW? As Medianjoe describes this in his instructions?

When you are using this SW:

Do you get connection to your VAS device using this SW?
Which colour does the dot in the SW have?
Did you use the correct pins in  the OBD-Plug for the temporary power supply?

Did you deinstall all your old drivers from earlier installations of you?

Because oft he perfect instructions of medianjoe I never check or use the device manager.
When is the dm showing the error 41 or 51?

Did you follow the instructions in the so called preinstallation?
Have you read the posting of midianjoe right below the big posting? Concernng the edic drivers?

br & good luck
grabbelmanko

Its red color in sw when i try to test.
I uninstall roturbo drivers.
Device manager show error code 51.
I follow instructions, but will try again later.
Thanks

[Khaldoun96]

Did you disable secure boot in bios?

no i didn't i'll try it thanks mate

[grabbelmanko]

Its red color in sw when i try to test.
I uninstall roturbo drivers.
Device manager show error code 51.
I follow instructions, but will try again later.
Thanks
[/quote]

Hallo Ivan,
the red colour gives you a hint to search in the driver problem zone:

As Medianjoe wrote :  - RED dot : PC <-> VAS5054A does not communicate. Something wrong on your driver.

In medianjoes thread there is the link for the drivers he recommand in the word here. version is (here) or there.

So best wishes for your further experiments!
br
grabbelmanko

[ivkera82]

Its red color in sw when i try to test.
I uninstall roturbo drivers.
Device manager show error code 51.
I follow instructions, but will try again later.
Thanks

Hallo Ivan,
the red colour gives you a hint to search in the driver problem zone:

As Medianjoe wrote :  - RED dot : PC <-> VAS5054A does not communicate. Something wrong on your driver.

In medianjoes thread there is the link for the drivers he recommand in the word here. version is (here) or there.

So best wishes for your further experiments!
br
grabbelmanko
[/quote]

for me drivers from medianjoe not work. roturbo drivers work ok, but on some cars not work actuator test in xentry for example glk 2011.
thanks on help

[akmangus]

I cloning SSD china with the version 12/2018...
I have activated (foto 1).
But when I try to open Xentry, DAS, StartKeyCenter, Vediamo... it I get this (foto 2):

Do we have a solution to overcome this protection? 

Or the KG for this?

The only person that calc that password is the china vendor.

This is definitely a Chinese software lock. The vendor I purchased from only locked the DAS file and I easily overcame this by simply replacing the das32r2 file in das/bin with the das standalone found on this site. Totally works with no issues now.

It's amazing that they protect already stolen software!!!!

[felipe]

Hello guys-

Thanks for this posting. I have successfully installed this program, everything works fine, I can enter my vehicle W176 with VAS5054A, but I can not activate special functions and development mode, I came to a menu with username and password and nothing I can do, could you tell me what to do .. .. Thank you.

Version: Passthru 2019-03