Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

BMW i3 programming ista-p do I need use extra power source?
12-01-2018, 10:58 AM,
Post: #1
BMW i3 programming ista-p do I need use extra power source?
Hi guys,

I want to program i3, can it be done without extra power source? Does anyone knows procedure?
Thank you.
Quote this message in a reply
12-01-2018, 12:16 PM,
Post: #2
RE: BMW i3 programming ista-p do I need use extra power source?
Just plug 12V charger on battery
Quote this message in a reply
[+] 2 users say Thank You to inspi1981 for this post
12-01-2018, 14:39 PM,
Post: #3
RE: BMW i3 programming ista-p do I need use extra power source?
I just connect the charger to the 12v battery.
Quote this message in a reply
[+] 2 users say Thank You to bawareca for this post
12-01-2018, 16:45 PM,
Post: #4
RE: BMW i3 programming ista-p do I need use extra power source?
(12-01-2018, 14:39 PM)bawareca Wrote:  I just connect the charger to the 12v battery.

No need for unplugging HV -Battery...
Quote this message in a reply
[+] 2 users say Thank You to Patrick11021979 for this post
12-01-2018, 17:56 PM,
Post: #5
RE: BMW i3 programming ista-p do I need use extra power source?
Ok, so who has right? Do I need to unplug or not? Anyone programmed modules when HV was plugged?
Quote this message in a reply
12-01-2018, 18:50 PM,
Post: #6
RE: BMW i3 programming ista-p do I need use extra power source?
You should disable the hv using the service disconnect under the bonnet, confirm deactivation via check control message, then connect 12 power supply and program as normal.
Quote this message in a reply
[+] 2 users say Thank You to tonemoz for this post
12-01-2018, 22:04 PM,
Post: #7
RE: BMW i3 programming ista-p do I need use extra power source?
Thanks, this hv connector is on the left side under the bonnet? Under plastic cover above headlight?

Can anyone tell me exactly where?
Quote this message in a reply
13-01-2018, 03:10 AM, (This post was last modified: 13-01-2018, 03:13 AM by winter.)
Post: #8
RE: BMW i3 programming ista-p do I need use extra power source?
(12-01-2018, 22:04 PM)pweber84 Wrote:  Thanks, this hv connector is on the left side under the bonnet? Under plastic cover above headlight?

Can anyone tell me exactly where?

Yes.service connector under the engine hood with orange color,please attention after lift up the connector then lock it with an "U" lock.and chech CC from instrument cluster.

Another attention is the charger must be connected to EME(luggage compartment,remove the cover) two low voltage poles not 12v battery under the engine hood.
Quote this message in a reply
[+] 2 users say Thank You to winter for this post
13-01-2018, 05:51 AM,
Post: #9
XZBMW  RE: BMW i3 programming ista-p do I need use extra power source?
See attachment for pic


Attached Files Thumbnail(s)
   
Quote this message in a reply
[+] 4 users say Thank You to MBB for this post
13-01-2018, 08:37 AM, (This post was last modified: 13-01-2018, 08:47 AM by Patrick11021979.)
Post: #10
RE: BMW i3 programming ista-p do I need use extra power source?
(12-01-2018, 18:50 PM)tonemoz Wrote:  You should disable the hv using the service disconnect under the bonnet, confirm deactivation via check control message, then connect 12 power supply and program as normal.

It was used to disconnect HV-Battery, but by the latest methods by bmw it is not required anymore...

Little correction, if the I-Fase is before or is I001-14-03-504, than you have to disconnect HV- Battery, but if it has a newer I-Level it isn't needed anymore because Ista/p or Ista/d does do it automatically by programming....
Quote this message in a reply
[+] 2 users say Thank You to Patrick11021979 for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  ista 4.46 Standalone kiranabc 28 2,707 23 minutes ago
Last Post: edtech
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 257 3 hours ago
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,243 Yesterday, 20:02 PM
Last Post: Node
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,646 626,536 Yesterday, 16:29 PM
Last Post: Sedoy
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,404 Yesterday, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 117 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 154 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 659 25-03-2024, 08:11 AM
Last Post: Node
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 322 121,413 24-03-2024, 23:45 PM
Last Post: armenh7
  REQUEST ista 4.45.21 the ISTAGUI.exe file ddsx 5 322 24-03-2024, 14:15 PM
Last Post: Mathijshee

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content