Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW i3 programming ista-p do I need use extra power source?
12-01-2018, 10:58 AM,
Post: #1
|
|||
|
|||
BMW i3 programming ista-p do I need use extra power source?
Hi guys,
I want to program i3, can it be done without extra power source? Does anyone knows procedure? Thank you. |
|||
12-01-2018, 12:16 PM,
Post: #2
|
|||
|
|||
RE: BMW i3 programming ista-p do I need use extra power source?
Just plug 12V charger on battery
|
|||
12-01-2018, 14:39 PM,
Post: #3
|
|||
|
|||
RE: BMW i3 programming ista-p do I need use extra power source?
I just connect the charger to the 12v battery.
|
|||
12-01-2018, 16:45 PM,
Post: #4
|
|||
|
|||
RE: BMW i3 programming ista-p do I need use extra power source?
|
|||
12-01-2018, 17:56 PM,
Post: #5
|
|||
|
|||
RE: BMW i3 programming ista-p do I need use extra power source?
Ok, so who has right? Do I need to unplug or not? Anyone programmed modules when HV was plugged?
|
|||
12-01-2018, 18:50 PM,
Post: #6
|
|||
|
|||
RE: BMW i3 programming ista-p do I need use extra power source?
You should disable the hv using the service disconnect under the bonnet, confirm deactivation via check control message, then connect 12 power supply and program as normal.
|
|||
12-01-2018, 22:04 PM,
Post: #7
|
|||
|
|||
RE: BMW i3 programming ista-p do I need use extra power source?
Thanks, this hv connector is on the left side under the bonnet? Under plastic cover above headlight?
Can anyone tell me exactly where? |
|||
13-01-2018, 03:10 AM,
(This post was last modified: 13-01-2018, 03:13 AM by winter.)
Post: #8
|
|||
|
|||
RE: BMW i3 programming ista-p do I need use extra power source?
(12-01-2018, 22:04 PM)pweber84 Wrote: Thanks, this hv connector is on the left side under the bonnet? Under plastic cover above headlight? Yes.service connector under the engine hood with orange color,please attention after lift up the connector then lock it with an "U" lock.and chech CC from instrument cluster. Another attention is the charger must be connected to EME(luggage compartment,remove the cover) two low voltage poles not 12v battery under the engine hood. |
|||
13-01-2018, 05:51 AM,
Post: #9
|
|||
|
|||
RE: BMW i3 programming ista-p do I need use extra power source?
See attachment for pic
|
|||
13-01-2018, 08:37 AM,
(This post was last modified: 13-01-2018, 08:47 AM by Patrick11021979.)
Post: #10
|
|||
|
|||
RE: BMW i3 programming ista-p do I need use extra power source?
(12-01-2018, 18:50 PM)tonemoz Wrote: You should disable the hv using the service disconnect under the bonnet, confirm deactivation via check control message, then connect 12 power supply and program as normal. It was used to disconnect HV-Battery, but by the latest methods by bmw it is not required anymore... Little correction, if the I-Fase is before or is I001-14-03-504, than you have to disconnect HV- Battery, but if it has a newer I-Level it isn't needed anymore because Ista/p or Ista/d does do it automatically by programming.... |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
ista 4.46 Standalone | kiranabc | 33 | 2,973 |
3 hours ago Last Post: Siki78 |
|
ISTA Standalone Licenserequest up to v4.37.4x | Sedoy | 8,648 | 627,560 |
5 hours ago Last Post: Sedoy |
|
ista for use whit vcx se | db8000 | 0 | 36 |
8 hours ago Last Post: db8000 |
|
AOS Ista possible to deactivate second check after scan? | RaoulK1998 | 17 | 329 |
Today, 10:39 AM Last Post: RaoulK1998 |
|
ISTA 4.46.xx problems and possible solution | Sedoy | 76 | 7,316 |
Yesterday, 20:02 PM Last Post: Node |
|
Update ISTA at once 4.43.40 (ISTA Update Program) | charlesjyw | 34 | 6,456 |
Yesterday, 10:39 AM Last Post: MINIGP1610 |
|
BMW ISTA-P Rheingold 69.0.200 (Torrent File) | carsoftcare | 1 | 125 |
26-03-2024, 12:09 PM Last Post: hlip |
|
ISTA launcher problem | Red_bean_bun | 1 | 157 |
26-03-2024, 05:11 AM Last Post: 2013m5 |
|
Adding a new vehicle/model to "Reingold" ISTA+ | dieselweasel | 12 | 666 |
25-03-2024, 08:11 AM Last Post: Node |
|
Ultimate Ediabas/ISTA+ voltage control V3 | Node | 322 | 121,483 |
24-03-2024, 23:45 PM Last Post: armenh7 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content