[reasson23]

I have a problem with CNC navigation

First inserted the new maps dvd ( Renault Carminat V32.1 ) and everything goes well maps are showed on the screen, second i applyed new update cd for CNC and finished with succes tellin me to remove the cd and restart the machine and insert map DVD (see pic below). Now the problem is the DVD drive wont let me insert the nav DVD, just wont pull the dvd inside. Is the button PLAY-LOAD/EJECT should move freely or is electronically controlled? The car is Megane III 2009 with the navigation dvd in the glovebox. If someone have a solutions for this problem i would be very grateful.

https://ibb.co/d7xrP6
https://ibb.co/gvSKu6
https://ibb.co/nLYL1m

Thanks in advance.

[Janch]

Try to disconnect the battery..

[reasson23]

Try to disconnect the battery..

I tried it but it does not work, still stuck in PLAY position and "Insert navigation DVD" screen.

[nosferanosferatuno]

First mistake you made was updating SW which isn't necessary to use latest maps, updating by copied CDs bring problems... However, try take out unit, open top cover, disconnect power of unit, and put dvd manually, and then connect back and check situation. That button is manually, but cause of some thngs you didnt do as procedure suggest, it happens now.

Probably you missed some step, like waiting 30 seconds, or whatever, something not finished as needed, and now it happens to you.

[ciripian]

I have carminat patched for sdcard if you can try this.

[Janch]

He cannot insert SD card into a DVD drive..