Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA-D 4.09.21 Warning while programming
15-01-2018, 18:21 PM,
(This post was last modified: 15-01-2018, 18:36 PM by mjuhl2003.)
Post: #1
|
|||
|
|||
ISTA-D 4.09.21 Warning while programming
Hi All
I have updated a lot of cars with ISTA-D and have never had any problems. I use genuen Icom Next and Org. BMW PSU However I yesterday I updated an F25 and while programming the CIC after 30min a warning turned up on the screen saying somthing like this. "Warning - Programming session Active on the...." And I could chose OK - Everything was fine - Programming still running Then again after 30 min. the same warning came up?? Has anyone seen that before? Or is something wrong in my install? I run ISTA-D Standalone This is from the LOGFILE 2018-01-14 12:03:07 INFO [T] ISTA: [22] InteractionController.RegisterInteractionModel() - A 'InteractionMessageModel' was registered. 2018-01-14 12:05:01 ERROR [T] ISTA: [30] InteractionController.RegisterInteraction - failed with exception: System.ArgumentException: Model is already registered. at BMW.Rheingold.CoreFramework.Interaction.InteractionController.RegisterInteractionModel(InteractionModel model) at BMW.Rheingold.CoreFramework.Interaction.InteractionController.RegisterInteraction(InteractionModel model) 2018-01-14 12:05:01 INFO [T] ISTA: [30] VehicleProgrammingProhibitionChecker.ShowMessage() - Programming prohibition occured. Following warningmessage thrown. 2018-01-14 12:05:01 INFO [T] ISTA: [30] VehicleProgrammingProhibitionChecker.ShowMessage() - Important! An operation with programming is active! Check the LAN cable and voltage supply and secure them if necessary! If the instruction is not followed, a programming abort will result. 2018-01-14 12:06:41 INFO [T] ISTA: [1] InteractionRequestModel.OnResponseRecived() - InteractionResponse was set to the model. 2018-01-14 12:06:41 INFO [T] ISTA: [1] InteractionMessageModel.OnResponseRecived() - InteractionButtonResponse was set to the model. Parameter: Button = 'Commit' 2018-01-14 12:06:41 INFO [T] ISTA: [22] VehicleProgrammingProhibitionChecker.ShowMessage() - Programming prohibition occured. Following warningmessage thrown. 2018-01-14 12:06:41 INFO [T] ISTA: [1] InteractionController.DeregisterInteraction() - A 'InteractionMessageModel' was deregistered. 2018-01-14 12:06:41 INFO [T] ISTA: [22] VehicleProgrammingProhibitionChecker.ShowMessage() - Important! An operation with programming is active! Check the LAN cable and voltage supply and secure them if necessary! If the instruction is not followed, a programming abort will result. 2018-01-14 12:31:01 INFO [T] ISTA: [19] InteractionController.RegisterInteractionModel() - A 'InteractionMessageModel' was registered. 2018-01-14 12:31:13 INFO [T] ISTA: [1] InteractionRequestModel.OnResponseRecived() - InteractionResponse was set to the model. 2018-01-14 12:31:13 INFO [T] ISTA: [1] InteractionMessageModel.OnResponseRecived() - InteractionButtonResponse was set to the model. Parameter: Button = 'Commit' 2018-01-14 12:31:13 INFO [T] ISTA: [19] VehicleProgrammingProhibitionChecker.ShowMessage() - Programming prohibition occured. Following warningmessage thrown. 2018-01-14 12:31:13 INFO [T] ISTA: [1] InteractionController.DeregisterInteraction() - A 'InteractionMessageModel' was deregistered. 2018-01-14 12:31:13 INFO [T] ISTA: [19] VehicleProgrammingProhibitionChecker.ShowMessage() - Important! An operation with programming is active! Check the LAN cable and voltage supply and secure them if necessary! If the instruction is not followed, a programming abort will result. 2018-01-14 12:33:05 INFO [T] ISTA: [26] InteractionController.RegisterInteractionModel() - A 'InteractionMessageModel' was registered. 2018-01-14 12:33:17 INFO [T] ISTA: [1] InteractionRequestModel.OnResponseRecived() - InteractionResponse was set to the model. 2018-01-14 12:33:17 INFO [T] ISTA: [1] InteractionMessageModel.OnResponseRecived() - InteractionButtonResponse was set to the model. Parameter: Button = 'Commit' 2018-01-14 12:33:17 INFO [T] ISTA: [26] VehicleProgrammingProhibitionChecker.ShowMessage() - Programming prohibition occured. Following warningmessage thrown. 2018-01-14 12:33:17 INFO [T] ISTA: [1] InteractionController.DeregisterInteraction() - A 'InteractionMessageModel' was deregistered. 2018-01-14 12:33:17 INFO [T] ISTA: [26] VehicleProgrammingProhibitionChecker.ShowMessage() - Important! An operation with programming is active! Check the LAN cable and voltage supply and secure them if necessary! If the instruction is not followed, a programming abort will result. Thanks Don't forget to press and , if my post helped you.
|
|||
15-01-2018, 19:13 PM,
Post: #2
|
|||
|
|||
RE: ISTA-D 4.09.21 Warning while programming
Bad Network cable maybe?
|
|||
15-01-2018, 19:34 PM,
Post: #3
|
|||
|
|||
RE: ISTA-D 4.09.21 Warning while programming
I just saw this one from the release notes - I think that is the problem
4.13 ICOM connection fault is displayed during programming Fault description: It is possible that a ICOM connection fault will be displayed during programming, especially when programming the Head Unit High. Model series affected: All vehicles. Measure/workaround: The message can be ignored. Fault corrected by: Currently still open. Affected application: ISTA 4 Don't forget to press and , if my post helped you.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content