[uros2002]

Regards,

I have a problem with Fiat Stilo 1.8 98KV with integrated gas conditioning.

On board were remembered following codes.
P0120
P0638

Problem:
While driving the engine speed drops to 150RPM.
When stopping at traffic lights or stopping the engine speed drop and the engine stops.

Controlled:
Control of electro installation of the accelerator pedal
Control connector D004 to the accelerator pedal, clean contact.
Control connector on trrothle control unit, clean the contacts.

Having the vehicle built sequential gas conditioning controlled vacuum hoses.


Does anyone have any suggestions regarding this failure?

[bolecurug]

The first thing you'll check it
crankshaft sensor
else check the fuse panel is located in the engine compartment

[bolecurug]

The first thing you'll check it
crankshaft sensor
else check the fuse panel is located in the engine compartment

fuse panel next to the battery lost contact due to moisture.
clean and dry the problem will be solved.

---

The first thing you'll check it
crankshaft sensor
else check the fuse panel is located in the engine compartment

fuse panel next to the battery lost contact due to moisture.
clean and dry the problem will be solved.