Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BWM F10 remove pedestrian protection
23-01-2018, 23:42 PM,
Post: #1
|
|||
|
|||
BWM F10 remove pedestrian protection
Hi guys,
Is there any way to remove completely pedestrian protection system in F10. Every time I start the car there is pedestrian protection system error, caused by optical sensor behind the front bumper. I tried replacing the sensor with second hand and brand new with no success. The wiring and the socket are OK. I tried to remove 8TF Active Protection For Pedestrians from VO with ESYS and code all car but again no success. We all know how to retrofit and add options to our cars but how the hell to remove options that pisses us off? |
|||
24-01-2018, 00:10 AM,
Post: #2
|
|||
|
|||
RE: BWM F10 remove pedestrian protection
Bumper belt is not enough. Need to replace it all with new ones or remove it all.
5 sensors inside engine bay + belt in bumper |
|||
24-01-2018, 09:19 AM,
Post: #3
|
|||
|
|||
RE: BWM F10 remove pedestrian protection
Remove 8TF with Esys. Recode airbag. Next disconect all things needed to pedestrian protect.
When you remove 8TF, then you have "plausibility faults". You must disconect parts that make error |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content