Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Most GW problem e90 / winkfp
04-02-2018, 14:16 PM,
Post: #1
XZBMW  Most GW problem e90 / winkfp
Hi. Long story but my Most Gatway module stoped responding after an attempted update. I have an icom a2 + b and I've been attempting to get it working again. Problem is when I use ISTA it asks me for all of the part numbers of everything on the most loop which i can't find. I would try to get it working again in winkfp but I'm unsure how to even start.

The Most head is working as far as i can tell but only the green light on the system seems to light up, the MOST light flashes red once or twice and that is it. The radio/screen unit itself doesn't seem to work and I've tried the basics like disconnecting the battery and so forth

I have a 2008 320i e90 with the ccc head unit (small screen, dvd navigation with idrive). I read something about a CD for recovering the unit but can't seem to find a link for it anywhere and not sure it would fix my problem. Not even sure if it's the gw (which is what ista says) or if its something on the loop. Apparently only one of them needs to stop working for them to all to stop responding.

Any help on the process of trying to get it to work again using winkfp would be appreciated. Thanks.
Quote this message in a reply
04-02-2018, 20:39 PM,
Post: #2
RE: Most GW problem e90 / winkfp
CCC / MOST GW
no MOST is programmed
only DCAN or K-line port 6801 (interface= REMOTE)
only when you program GW you change from
on port 6802 and program the rest of the modules MOST
or EASYCONNECT (only standard tools 2.12 has remote.ini)
MOST GW interface = REMOTE: DiagBus
or interface = Remote: OBD_ab625
the rest of the MOST modules
interface = Remote: MOST_ASYNC

If my post helped you hit the thanks and reputation button!under
Quote this message in a reply
04-02-2018, 21:54 PM,
Post: #3
RE: Most GW problem e90 / winkfp
If you have WINKFP I can help you.
Quote this message in a reply
[+] 2 users say Thank You to simaservis1108 for this post
04-02-2018, 22:40 PM, (This post was last modified: 05-02-2018, 01:19 AM by mace0.)
Post: #4
RE: Most GW problem e90 / winkfp
Thanks for the replies, yes I have winkfp up and running and the Daten files loaded. If you can give me some detailed instructions (I say detailed because I'm new to this) I would be really greatful.


(04-02-2018, 21:54 PM)simaservis1108 Wrote:  If you have WINKFP I can help you.
Quote this message in a reply
09-02-2018, 11:32 AM, (This post was last modified: 13-02-2018, 12:09 PM by mace0.)
Post: #5
RE: Most GW problem e90 / winkfp
(04-02-2018, 22:40 PM)mace0 Wrote:  Thanks for the replies, yes I have winkfp up and running and the Daten files loaded. If you can give me some detailed instructions (I say detailed because I'm new to this) I would be really greatful.


(04-02-2018, 21:54 PM)simaservis1108 Wrote:  If you have WINKFP I can help you.

Thought i would upload these to clarify things a little. This is when an ISTA update went wrong, both the DME and MOST gateway are stuck in state 12. Im really interested in recovering the MOST GW so that i can attempt to update using ista again. I have read of people repairing their CIC units, but i can't find any information for my unit specifically. Its a CCC HW v7. I know this can be done in professional mode, but i am unsure of some of the settings in Winkfp, the start address is one which im not sure of and don't want to guess. Any help is appreciated. Thanks.
Quote this message in a reply
13-02-2018, 12:15 PM,
Post: #6
RE: Most GW problem e90 / winkfp
In the end I was able to fix this by finding the ZB number of the module in inpa. Then finding the closest match in winkfp. MASKG2. After flashing with that the MOST loop was working again and was able to update the other modules with Insta/p. Winkfp just had trouble finding the exact match but as i read in other posts making an educated guess (being very careful) you can find the closest match, usually off by the last digit in the daten folder.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  CCC flash WINKFP ICOM BimmerSLO 8 116 2 hours ago
Last Post: Mefiuu92
XZBMW Bmw 5,f10 radio problem RobertRexhaj 3 80 Yesterday, 18:47 PM
Last Post: Unspec
  ISTA launcher problem Red_bean_bun 1 171 26-03-2024, 05:11 AM
Last Post: 2013m5
  Dme Cas synchronization Problem donjuan020 3 205 25-03-2024, 21:55 PM
Last Post: BmwMerc
XZBMW WinKFP can't find ZUSB 6957356 andre426hemi 4 209 25-03-2024, 00:40 AM
Last Post: armenh7
  BMW e39 530d 2001 problem after MAF change boweld11 3 106 24-03-2024, 22:44 PM
Last Post: SkeYT
XZBMW Entrynav2 Maps Problem Chillmeister 3 288 24-03-2024, 17:18 PM
Last Post: Chillmeister
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,910 24-03-2024, 11:29 AM
Last Post: Twointje
  Battery lead positive underfloor problem da.2022 10 210 24-03-2024, 09:38 AM
Last Post: pupu144
  Problem Retrofit electrified steering column on the G31 LCI smercki 12 344 22-03-2024, 12:55 PM
Last Post: Node

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content