[flashgorden2010]

run under Win7 32bit with old 5054a interface???

[RUGGED]

Hello,

I got everything, until Number 6. I install ODIS-E, which went ok.
However, when I install PostSetup for ODIS-E, it only found 4 files, and takes only 185Mb from a 10Gb PostSetup file.
How can this be?

Other have said that to go into ODIS-E, and then install the brands one by one, but it doesn't matter how I direct it to the correct directory, it refuses to find any more files to update with.

Where am I going wrong???

Thanks

[grieg]

run under Win7 32bit with old 5054a interface???

Right; I 'am running Offboard.. under win7 32 bit using old VAS5054A

[etar]

Vas 5054A on Win 7 x64 Pro
In edic configuration manager i've got Device is not accessible.

In ODIS details VCI i can see only Serial number other fields are empty. ODIS can't comunicate with VCI. (but see in interface)
Any solutions?

[vagvag]

Vas 5054A on Win 7 x64 Pro
In edic configuration manager i've got Device is not accessible.

In ODIS details VCI i can see only Serial number other fields are empty. ODIS can't comunicate with VCI. (but see in interface)
Any solutions?

If you use the previous Edic package (Pdu Api 041) as required for clone head, then you have bad quality of cone Vas5054 head.............
You are not the first one............
Regarts.........

[veedabowlu]

Hello... I need some help with getting this ODIS 4.3.3 software working...with "VAS 6154" clone.
0n Windows 7 Pro 32 bit... installing it, i selected VAS 5054, then did "ODIS 4.3.3 Update 51.0.670"
When I start the program, it seems to load up ok... but I cant connect to the car...
I get the "no vehicle connected"...please check the ignition...I believe i deleted the Softing 1.20.42 & replaced it with the 1.20.41 in BOTH program files & program files (x86)
But it still does not connect to the car.
When I click on the VCI icon on the program screen, a pop up window shows up and the information is blank..

What am i missing, please help

[etar]

veedabowlu probably you have shit quality vas like mine

If you have 32bit system you cannot have x86 program files.

Try this fix on the attachment (you can open it with 7zip and manually put files). On my vas it allows recognize ignition but still cannot connect to the car.

[veedabowlu]

I did try that already, no luck.... should I delete the (86) program files?

[dcat]

veedabowlu probably you have shit quality vas like mine

If you have 32bit system you cannot have x86 program files.

Try this fix on the attachment (you can open it with 7zip and manually put files). On my vas it allows recognize ignition but still cannot connect to the car.

this help for me, thanks.
with odis 4.2.3, w7 x64

[zvonexp]

maybe someone have solution

Windows 7 64 bit

ODIS 4.3.3 installed, used Softing and clone fix from here and also tried a lot of them from internet

but always getting when open ODIS " The system was not able to detect whether a vehicle is connected. The reason for this might be the diagnostic hardware used "

Also on Information i can't see VAS5054, VCI

In device manager VAS5054 installed with drivers from Softing for clones