Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA/D via Apple USB Ethernet Adapter (MBPro2016)
09-02-2018, 14:57 PM,
Post: #1
ISTA/D via Apple USB Ethernet Adapter (MBPro2016)
Using VMware 10.1.1 and managed to install ISTA D no problem and opens fine in Win7 Ultimate SP1 x64. I've run into issues with the Apple USB to Ethernet driver not being recognized or installing (even manually). Unfortunaely I have one of the late 2016 MBPro's and only have USB-C. I'm using an adapter I've used in the past successfully to open ISTA, before my VM went to hell. Any suggestions as for known working Windows 7 builds paired with compatible VMWare x.x.x?
Quote this message in a reply
09-02-2018, 15:18 PM,
Post: #2
RE: ISTA/D via Apple USB Ethernet Adapter (MBPro2016)
Thank you, I laughed for a long time reading this. rofl
Ask help from BMW center in Munich.
You will amuse them with this question and raise your spirits. biggrin

  • BMW software remote installation via TeamViewer.
Quote this message in a reply
09-02-2018, 16:31 PM,
Post: #3
RE: ISTA/D via Apple USB Ethernet Adapter (MBPro2016)
I am plan to buy macbook. does any one confirm to use EDIBAS and esys ?
Quote this message in a reply
09-02-2018, 17:03 PM,
Post: #4
RE: ISTA/D via Apple USB Ethernet Adapter (MBPro2016)
(09-02-2018, 16:31 PM)jojosqsq Wrote:  I am plan to buy macbook. does any one confirm to use EDIBAS and esys ?

I use EDIABAS and E-Sys with both VMWare Fusion and via bootcamp on my MBPr 2014 without any problems. I've had it running with both Windows 10 and Windows 7.
Quote this message in a reply
09-02-2018, 17:05 PM,
Post: #5
RE: ISTA/D via Apple USB Ethernet Adapter (MBPro2016)
(09-02-2018, 17:03 PM)JPToadstool Wrote:  
(09-02-2018, 16:31 PM)jojosqsq Wrote:  I am plan to buy macbook. does any one confirm to use EDIBAS and esys ?

I use EDIABAS and E-Sys with both VMWare Fusion and via bootcamp on my MBPr 2014 without any problems. I've had it running with both Windows 10 and Windows 7.

Of course it's working on old Macbook without USB-C ...
Quote this message in a reply
09-02-2018, 17:07 PM,
Post: #6
RE: ISTA/D via Apple USB Ethernet Adapter (MBPro2016)
(09-02-2018, 17:05 PM)botho Wrote:  
(09-02-2018, 17:03 PM)JPToadstool Wrote:  
(09-02-2018, 16:31 PM)jojosqsq Wrote:  I am plan to buy macbook. does any one confirm to use EDIBAS and esys ?

I use EDIABAS and E-Sys with both VMWare Fusion and via bootcamp on my MBPr 2014 without any problems. I've had it running with both Windows 10 and Windows 7.

Of course it's working on old Macbook without USB-C ...
On macbook pro late 2016 only have usb-c or thuderboth port. / Does anyone confirm use with adapter work perfect?

Sent from my SM-G955F using Tapatalk
Quote this message in a reply
09-02-2018, 17:12 PM,
Post: #7
RE: ISTA/D via Apple USB Ethernet Adapter (MBPro2016)
I'd use my MB Pro Late 2011 if the logic board weren't on it's way out. Don't want to risk a crash mid session...
Quote this message in a reply
09-02-2018, 17:31 PM,
Post: #8
RE: ISTA/D via Apple USB Ethernet Adapter (MBPro2016)
(09-02-2018, 17:05 PM)botho Wrote:  
(09-02-2018, 17:03 PM)JPToadstool Wrote:  
(09-02-2018, 16:31 PM)jojosqsq Wrote:  I am plan to buy macbook. does any one confirm to use EDIBAS and esys ?

I use EDIABAS and E-Sys with both VMWare Fusion and via bootcamp on my MBPr 2014 without any problems. I've had it running with both Windows 10 and Windows 7.

Of course it's working on old Macbook without USB-C ...

I can't guarantee it would work, but if the Mac can use the adapter to network, then it should be fine. Set VMWare to use bridged networking mode with that adapter, and then manage the IP settings through Windows.

Natively through bootcamp might be a little trickier. The old thunderbolt 2 would only work natively if the adapter was plugged in prior to booting.
Quote this message in a reply
[+] 2 users say Thank You to JPToadstool for this post
09-02-2018, 17:39 PM,
Post: #9
RE: ISTA/D via Apple USB Ethernet Adapter (MBPro2016)
(09-02-2018, 17:31 PM)JPToadstool Wrote:  
(09-02-2018, 17:05 PM)botho Wrote:  
(09-02-2018, 17:03 PM)JPToadstool Wrote:  
(09-02-2018, 16:31 PM)jojosqsq Wrote:  I am plan to buy macbook. does any one confirm to use EDIBAS and esys ?

I use EDIABAS and E-Sys with both VMWare Fusion and via bootcamp on my MBPr 2014 without any problems. I've had it running with both Windows 10 and Windows 7.

Of course it's working on old Macbook without USB-C ...

I can't guarantee it would work, but if the Mac can use the adapter to network, then it should be fine. Set VMWare to use bridged networking mode with that adapter, and then manage the IP settings through Windows.

Natively through bootcamp might be a little trickier. The old thunderbolt 2 would only work natively if the adapter was plugged in prior to booting.

Unfortunately I was using bridged mode prior. My issues were that the driver installation upon plugging adapter in both before boot and after came up with errors and troubleshooting solutions weren't effective.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  ista 4.46 Standalone kiranabc 33 2,953 2 hours ago
Last Post: Siki78
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,648 627,506 3 hours ago
Last Post: Sedoy
  ista for use whit vcx se db8000 0 33 6 hours ago
Last Post: db8000
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 306 11 hours ago
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,311 Yesterday, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,450 Yesterday, 10:39 AM
Last Post: MINIGP1610
  Car Systems / Custom Retrofit Garage ENBT Adapter Ulsmak 33 1,438 Yesterday, 00:17 AM
Last Post: painsage
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 125 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 157 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 666 25-03-2024, 08:11 AM
Last Post: Node

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content