[atomantmk]

I want to code speed limit to shows in KOMBI, do I need FSC or car to code with VO 8TH or what else must be coded?
In CIC I have found Speedlimit_Info and must be set on aktiv, anything else?

[Thorsten]

Hi,

You have Kafas installed and HUD?


Thorsten

[atomantmk]

Only Kafas

Sent from my SM-T585 using Tapatalk

[SweetBMW]

If you have KAFAS, then you need to add 8TH to VO, and code CIC, KOMBI, and KAFAS.

This will then show up in BC KOMBI as limit: xx kmh

HUD is not needed.

[atomantmk]

I have added 8TH and coded KOMBI and CIC but when I try to code CAFAS I have this error:



On BC KOMBI there is no limit: xx kmh

[SweetBMW]

I have added 8TH and coded KOMBI and CIC but when I try to code CAFAS I have this error:



On BC KOMBI there is no limit: xx kmh

KAFAS not connected correctly. Can you see KAFAS ECU in ISTA? What colour is the ECU?

[atomantmk]

In ISTA colour is like all other modules, KAFAS is changed from owner before but today I have updated and changed VIN and UIF.

Sent from my SM-T585 using Tapatalk

[SweetBMW]

Post picture from ISTA Control unit tree

[megars]

I have added 8TH and coded KOMBI and CIC but when I try to code CAFAS I have this error:



On BC KOMBI there is no limit: xx kmh

KAFAS not connected correctly. Can you see KAFAS ECU in ISTA? What colour is the ECU?

The instrument panel and CIC can be coded . And even without KAFAS will run SLI , but the software in the control panel should be final ! You have a JBЕ 3 ? If it costs JBE 2 then it is because of it not encoded by KAFAS .