ATTENTION !! Users which have not any posts were deleted !
  1. AutoHex II

  2. FemtoEVO

  3. AUTO CHIPS



BMW F10 (03/2012) NBT EVO retrofit SLI/FCW issues
14-02-2018, 18:28 PM,
Post: #1
BMW F10 (03/2012) NBT EVO retrofit SLI/FCW issues
Hello,

I am working on a NBT EVO(ID4 flashed to ID5) retrofit in a 2012 F10. Got all working except i have some issues with SLI and FCW. SLI isn't working at all just displaying sign with --- in it. For FCW I can't change the settings in menu. It just doesn't remember the setting. Since it is a 2012 car it uses KAFAS1.

Is there any FDL coding that can be done? Or do i need to convert to KAFAS2? Also other note is that the car have a 6WB cluster.

If it needs KAFAS2 is it straight swapping units and getting the right FSC codes or do I have a lot more trouble when swapping to KAFAS2?

Please don't offer FSC codes for KAFAS I know my way to get them.

Kind regards,

Lars
Quote this message in a reply
14-02-2018, 18:35 PM,
Post: #2
RE: BMW F10 (03/2012) NBT EVO retrofit SLI/FCW issues
As far as I am aware only way to solve that is to use the Carsystems MOST emulator because Kafas 1 and 2 do not use same bus speed.
So the emulator does the conversion nicely.
From experience, any pre 07.2012 that has high beam assist or Kafas, I always use MOST emulator.
Even if you convert ZGW to 8SK, it won't work anymore.

Now someone else might have a hack, but I doubt so. Not a matter of changing a few wires.

FSC FILES GENERATOR FOR NBT/NBT EVO/CARPLAY/BMW APPS
REMOTE RETROFIT CODING - HIGH QUALITY WIRING LOOMS FOR BMW
Quote this message in a reply
[-] The following 1 user says Thank You to bmwcoder75 for this post:
  • larshutten
14-02-2018, 19:02 PM,
Post: #3
RE: BMW F10 (03/2012) NBT EVO retrofit SLI/FCW issues
If you have all other working car system also has an emulator for SLI what has also the possibility to swap KAFAS1 messages to KAFAS2 messages and is much more cheaper than the MOST Fxx emulator.
Quote this message in a reply
[-] The following 2 users say Thank You to gt678 for this post:
  • bmwcoder75, larshutten
14-02-2018, 19:39 PM, (This post was last modified: 14-02-2018, 19:40 PM by larshutten.)
Post: #4
RE: BMW F10 (03/2012) NBT EVO retrofit SLI/FCW issues
Thanks for all the info. But i prefer to do it all without any emu since I didn't need one so far. Will contact carsystems for their options.

Just for the record swapping to KAFAS2 ECU and CAM is not an option?

Small edit I flashed the ZGW to 8SK software.
Quote this message in a reply
15-02-2018, 06:49 AM,
Post: #5
RE: BMW F10 (03/2012) NBT EVO retrofit SLI/FCW issues
HI,

your car was build with Kafas1, but Kafas1 on F10 isnt compatible to NBT or NBT Evo.
So you will need to use SLI emulator, this emulator will convert KAFAS1 information to NBT / NBT Evo.
Or retrofit Kafas2 ecu and cam with a new windshield.

The MOST retrofit adapter isnt needed, because your car should have right ZGW after flashing it.


Thorsten
Quote this message in a reply
[-] The following 1 user says Thank You to Thorsten for this post:
  • larshutten
15-02-2018, 07:04 AM,
Post: #6
RE: BMW F10 (03/2012) NBT EVO retrofit SLI/FCW issues
Can you not FDL code the SLI option from gen1 to gen2 or the other way around? This is normal when doing 6WB retrofit, im not sure if it works the other way around though.
Quote this message in a reply
15-02-2018, 07:30 AM,
Post: #7
RE: BMW F10 (03/2012) NBT EVO retrofit SLI/FCW issues
HI,

this coding wouldnt solve the missing SLI information.


Thorsten
Quote this message in a reply
14-05-2019, 19:38 PM,
Post: #8
XZBMW  RE: BMW F10 (03/2012) NBT EVO retrofit SLI/FCW issues
(14-02-2018, 18:28 PM)larshutten Wrote:  Hello,

I am working on a NBT EVO(ID4 flashed to ID5) retrofit in a 2012 F10. Got all working except i have some issues with SLI and FCW. SLI isn't working at all just displaying sign with --- in it. For FCW I can't change the settings in menu. It just doesn't remember the setting. Since it is a 2012 car it uses KAFAS1.

Is there any FDL coding that can be done? Or do i need to convert to KAFAS2? Also other note is that the car have a 6WB cluster.

If it needs KAFAS2 is it straight swapping units and getting the right FSC codes or do I have a lot more trouble when swapping to KAFAS2?

Please don't offer FSC codes for KAFAS I know my way to get them.

Kind regards,

Lars

Have you found the solution for FCW ? I have a NBT EVO retrofit for F10 11.2012 with KAFAS2 with the same issue for FCW. SLI is working.
Quote this message in a reply
14-05-2019, 20:57 PM,
Post: #9
RE: BMW F10 (03/2012) NBT EVO retrofit SLI/FCW issues
Hi, no I didn’t get FCW setting fixed sadly.
Quote this message in a reply
15-05-2019, 06:50 AM,
Post: #10
RE: BMW F10 (03/2012) NBT EVO retrofit SLI/FCW issues
(15-02-2018, 07:30 AM)Thorsten Wrote:  HI,

this coding wouldnt solve the missing SLI information.


Thorsten

Try this : FDL code KOMBI 

NAVI_NBT_ENABLE change to NBT_ANZEIGE
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Gxx shift paddle retrofit - coding acolt 1 84 Yesterday, 12:59 PM
Last Post: ____ANGEL___
  ATM retrofit, I can not update bmw services ruben_17non 1 98 03-04-2020, 21:44 PM
Last Post: BugFix
  Bmw F11 11/2011 Nbt Retrofit Rieger 13 340 03-04-2020, 11:36 AM
Last Post: Rieger
XZBMW BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS intel123 880 399,880 02-04-2020, 13:56 PM
Last Post: atomantmk
XZBMW Solved ✔ Mini CHAMP2 retrofit, cannot connect via enet to e-sys jamesworts 6 142 02-04-2020, 12:51 PM
Last Post: jamesworts
XSMini Mini F Series Comfort Access retrofit maninblack 5 552 01-04-2020, 20:24 PM
Last Post: maninblack
  BMW G30 Retrofit ICAM ultimate 9 3,108 01-04-2020, 15:49 PM
Last Post: Shatter
  G05 retrofit SA 5DF Patrick11021979 2 264 31-03-2020, 20:40 PM
Last Post: Volum
XZBMW G30 6WB cluster retrofit problem Shatter 12 777 31-03-2020, 18:27 PM
Last Post: Levanime
  Icom Next issues mapkrk 7 333 30-03-2020, 18:20 PM
Last Post: mapkrk

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content