[atomantmk]

BMW E70 from 2010 has a funny problem, when i press button for front fog lights I see that headlights are working but not fog lights.

Here is copy of FSW_PSW and NETTODAT and I can't find what the problem is.

And video how it looks like.
http://cloud.tapatalk.com/s/5a86ea5d34e5...35_s01.mp4

[lynxbmw]

Any errors on diagnostic?
Can you switch cold and hot monitoring back to ON, because they are OFF and see if bulb error will popup ?

[atomantmk]

There are a few errors.

[lynxbmw]

Code FRM by VO and run new diagnostic session to see if there will be different/new errors.

[lolo24]

Try to update module with Winkpf and the recode by car VO using NCS hope this will help

[atomantmk]

After long searching on internet I have found that this is well known problem with FRM3 modules on E70 series when you try to start the engine with boost cables.

ZUSB number is 9240527 but I can't find right software to flash.

[lolo24]

I have than number from e87 this one is updated I can try to help you to update it remotly if you want

[atomantmk]

With WinKFP to update or ISTA P?

Sent from my HTC 10 using Tapatalk

[willisodhiambo]

With WinKFP to update or ISTA P?

Sent from my HTC 10 using Tapatalk

Open winkfp, update winkfp first. Go to comfort mode, select update zusb, select ecu family, enter gibberish for vin, click done, click update zusb, winkfp will give you the latest ZUSB for your module. Exit at this stage, go back to comfort mode, choose ZUSB and enter the correct and latest one as obtained just before , enter your vin, done, Prog update.

good luck.