Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ CodIng nbt touch controller
18-02-2018, 19:11 PM,
(This post was last modified: 19-02-2018, 01:43 AM by Clusters.)
Post: #1
|
|||
|
|||
CodIng nbt touch controller
Hi guys,
I had to replace my faulty nbt evo touch controller for a used one however I’m getting an error on ISTA saying the “CON” module is not coded to the car and there is no coding data for it. I checked the ZBE3 module on esys and it has no CAFD data. I followed some steps to inject the CAFD files but was stuck at a point where I couldn’t go further. Could you please help me inject the files? The steps says connect the car then load FA then Activate FA then load SVT then “left” click on the module, actually this is the step I’m stuck at as the left click does nothing when i click on the module! Many thanks |
|||
18-02-2018, 19:54 PM,
Post: #2
|
|||
|
|||
RE: CodIng nbt touch controller
You need to be using esys 2.71
connect, read FA activate read SVT click on the Module so it is highlighted then on right hand side of the screen click button Detect CAF for SWE Select the latest file in the pop up box. afterwards right click on the module and select Code |
|||
18-02-2018, 22:45 PM,
(This post was last modified: 18-02-2018, 22:59 PM by agad.)
Post: #3
|
|||
|
|||
RE: CodIng nbt touch controller
(18-02-2018, 19:54 PM)maxwell4321 Wrote: You need to be using esys 2.71 Hi, actually I can’t use these options! I only have a couple of other choices that aren’t greyed out! Have a look at the attached photo. Thanks |
|||
18-02-2018, 22:57 PM,
Post: #4
|
|||
|
|||
RE: CodIng nbt touch controller
Use e-sys 3.27.1 because 3.28 has an issue with newer psdzdata.
|
|||
18-02-2018, 23:22 PM,
Post: #5
|
|||
|
|||
RE: CodIng nbt touch controller
|
|||
18-02-2018, 23:26 PM,
Post: #6
|
|||
|
|||
RE: CodIng nbt touch controller
(18-02-2018, 23:22 PM)agad Wrote:(18-02-2018, 22:57 PM)lynxbmw Wrote: Use e-sys 3.27.1 because 3.28 has an issue with newer psdzdata. Not at all. That's exactly what you need just for coding. Full is for programming too. |
|||
19-02-2018, 01:02 AM,
Post: #7
|
|||
|
|||
RE: CodIng nbt touch controller
All done guys! Many thanks
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content