Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Problem with downloading maps to CIC - E61
18-02-2018, 21:04 PM,
Post: #1
|
|||
|
|||
Problem with downloading maps to CIC - E61
Hello
I have the following problem with running navigation in CIC. I updated the soft with WINKFP (modules 63.62, A0) in CIC in E61 from 2008. Everything went OK. I coded PL language but I can not start navigation. By USB on the clipboard I do not go to the map, the connector works because it is going to import files, the DVD also does not start the map. Has anyone had such a case. Currently, after pressing Idrive navi message like in the picture, soft as in the attachment. I obviously have the FSC code |
|||
18-02-2018, 22:41 PM,
(This post was last modified: 18-02-2018, 22:42 PM by lynxbmw.)
Post: #2
|
|||
|
|||
RE: Problem with downloading maps to CIC - E61
That's definitely problem with HDD. Pull it out, check it for bad sectors, if there are none, just restore healthy image to it. If there are bad sectors, replace HDD with image on it.
|
|||
23-02-2018, 13:05 PM,
Post: #3
|
|||
|
|||
RE: Problem with downloading maps to CIC - E61
Can I copy partitions of a disk with maps from another car? Because everything on the disk works only you can not install the maps either from USB or from DVD Sorry, but I never did. The maps were deleted when updating the CIC software with WNKFP (modules 63, 62, A0). Before that everything was OK.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content