Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
6WA Retrofit error in Esys (F48)
23-02-2018, 10:17 AM,
(This post was last modified: 23-02-2018, 10:19 AM by Skid1164.)
Post: #1
|
|||
|
|||
6WA Retrofit error in Esys (F48)
Hi to all professionals here
I have the standard Navi and standard speedometer in my F48. Yesterday I installed 6wa speedometer and first wanted to change FA with esys(6wa add). but esys constantly show me an error: "No FP "" could be generated from FA. [C002] Not all elements of the FA were found in the FA2FP: SALPA 6WA " What am I doing wrong ? Kombi or BKombi is not seen in Esys - but is also connected with new fiber optic cable with Entrynav. Esys 3.28.1 Launcher Premium 2.8.0 newest psdzdata Greetings |
|||
23-02-2018, 20:23 PM,
Post: #2
|
|||
|
|||
RE: 6WA Retrofit error in Esys (F48)
Here ist the complete error:
com.bmw.esys.domain.psdz.PsdzException: No FP could be generated from FA "". [C002] at com.bmw.esys.domain.psdz.Psdz.generateFP(Psdz.java:714) at com.bmw.esys.domain.fa.FpLogic.generateFp(FpLogic.java:84) at com.bmw.esys.gui.fa.FpController.generateFp(FpController.java:119) at com.bmw.esys.gui.fa.FpController.execute(FpController.java:151) at com.bmw.esys.gui.AbstractController$ExtensionSupport.executeExtensions(AbstractController.java:117) at com.bmw.esys.gui.AbstractController$ExtensionSupport.executeExtensions(AbstractController.java:98) at com.bmw.esys.gui.AbstractController.executeExtensions(AbstractController.java:201) at com.bmw.esys.gui.fa.FalController.activateFa(FalController.java:110) at com.bmw.esys.gui.fa.FalView$ActivateFaAction.doActionPerformed(FalView.java:111) at com.bmw.esys.gui.AbstractView$AbstractGuiProgressAction$1.init(AbstractView.java:425) at com.bmw.esys.gui.component.DialogProgress$2.construct(DialogProgress.java:152) at com.bmw.esys.gui.component.SwingWorker$2.run(SwingWorker.java:145) at java.lang.Thread.run(Thread.java:745) Caused by: Not all elements of the FA were found in the FA2FP: SALAPA 6WA Timestamp: Fri Feb 23 21:11:48 CET 2018 ID: 72 Class: com.bmw.psdz.api.data.FP ExecutionContext={category=UNDEFINED, ecuid=(UNKNOWN,?)} at com.bmw.psdz.api.data.FP.fillByFA(FP.java:433) at com.bmw.psdz.logic.facade.LogicImpl.generateFP(LogicImpl.java:408) at com.bmw.psdz.facade.LogicBF.generateFP_aroundBody20(LogicBF.java:196) at com.bmw.psdz.facade.LogicBF.generateFP_aroundBody21$advice(LogicBF.java:84) at com.bmw.psdz.facade.LogicBF.generateFP(LogicBF.java:1) at com.bmw.esys.domain.psdz.Psdz.generateFP(Psdz.java:712) ... 12 more |
|||
23-02-2018, 20:58 PM,
Post: #3
|
|||
|
|||
RE: 6WA Retrofit error in Esys (F48)
Just for coding/programming the cluster try to change 6UN (Navigation) to 6UP (Navigation Plus).
|
|||
23-02-2018, 21:14 PM,
Post: #4
|
|||
|
|||
RE: 6WA Retrofit error in Esys (F48)
I sont think that 6wa was an option for the x1
|
|||
24-02-2018, 01:18 AM,
Post: #5
|
|||
|
|||
RE: 6WA Retrofit error in Esys (F48)
Yes i think also that 6WA is not an option for the X1 i get the same problem with an X3 F25
but i code it without FA |
|||
24-02-2018, 08:08 AM,
Post: #6
|
|||
|
|||
RE: 6WA Retrofit error in Esys (F48)
Thanks for the answers,
I already tried 6UP, but I do not see any KOMBI or BKOMBI in Esys to encode it. |
|||
02-03-2018, 09:42 AM,
Post: #7
|
|||
|
|||
RE: 6WA Retrofit error in Esys (F48)
Hi i try to flash the combi but i have this error in PSdZDATA
thanks for help , |
|||
07-01-2019, 20:15 PM,
Post: #8
|
|||
|
|||
RE: 6WA Retrofit error in Esys (F48)
I have replaced standard cluster with 6WA. When following all steps from a step-by-step guide i get VCM error. I then de-checked Update VCM, flashing now starts but i get some more errors. "TIMEOUT P2" and stops after 2min, see log file.
Can somebody point me in the right direction? i have tryd two esys versions 3.31 and 3.27, makes no difference. I have also tryd "READ FA" in TALL-Processing, according to a other guide "ecu flashing with esys". Quote:TAL execution started. |
|||
08-01-2019, 09:01 AM,
Post: #9
|
|||
|
|||
RE: 6WA Retrofit error in Esys (F48)
1. add 6UP and remove 6UN on FA
2. open option on e-sys and active flag "upgrade VCM after Tal" and "upgrade MSM after Tal" 3. code navi 4. SVT reset 5. Read Ecu now you see Kombi (no bkombi) and iniject CAFDT and CODE |
|||
Reputation: +2 - zx140k [+1] , Twointje [+1] | |||
08-01-2019, 09:46 AM,
Post: #10
|
|||
|
|||
RE: 6WA Retrofit error in Esys (F48)
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content