Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Retrofit Adaptive M Suspension
25-02-2018, 04:44 AM,
(This post was last modified: 25-02-2018, 15:32 PM by hkgans.)
Post: #1
|
|||
|
|||
Retrofit Adaptive M Suspension
Hi,
Still in my first step to retrofit 2VF Adaptive M Suspension. I was trying to put a used ICM Plus to a F20. After flashing car and ICM plus to the same Level 17-03-505, did ICM and ACSM coding and started the ICM sensors, I am still getting 930A67 Central Sensor (x-y-direction) communication fault, at the same time the passenger restraint fault shows at kombi. What does this x-y-direction mean? The only XY related info that I can find is that ICM connects to ACSM with 2 pins, ZXY+ and ZXY-. These pins are already connected also in Non Adaptive car. Does this fault complaint: 1. that I didn't have the complete setup (VDC ecu and structs with Vertical Acceleration sensors)? 2. the ICM has crash data? Wish that someone has the answer and I'm much appropriated for your help. Best regards William. |
|||
18-02-2019, 19:30 PM,
Post: #2
|
|||
|
|||
RE: Retrofit Adaptive M Suspension
(25-02-2018, 04:44 AM)hkgans Wrote: Hi, Did you ever resolve this? I have the same issue with a replacement ICM module. Thanks, Dave I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC BMW ISPI Admin Client License (Contact for info) Complete EntryNav2 FSC solution for Retrofit/Component Protection KAFAS2 7E/BE/BF KAFAS4 11F/13E/13F Carplay activations/FullScreen/ID4-5 EntryNav2 Carplay activations OEM/Provisioning Contact me for more information |
|||
24-04-2023, 11:26 AM,
Post: #3
|
|||
|
|||
RE: Retrofit Adaptive M Suspension
Were you able to resolve the 930A67 error?
|
|||
24-04-2023, 15:11 PM,
Post: #4
|
|||
|
|||
RE: Retrofit Adaptive M Suspension
1- Make sure ACSM is compatible
2- Flash ACSM with the highest ILevel along with the car 3- Make sure of connecting extra x-y wires from ICM to ACSM All my knowledge is free for exchange with valuable information
Sharing->Development
|
|||
24-04-2023, 15:46 PM,
Post: #5
|
|||
|
|||
RE: Retrofit Adaptive M Suspension
Hello, please check that,
Icm pin 27 and 28 to Ascm pin 19 and 20 is required with special equipment and icm and acsm must have the same software level. |
|||
24-04-2023, 16:10 PM,
Post: #6
|
|||
|
|||
RE: Retrofit Adaptive M Suspension
Have no idea what other posters write about wires as IMHO they should be there by default.
As no useful data is provided at all my crystal ball tells you have incompatible ACSM. ACSMs for 2VF may be DIFFERENT!!! I mean some ACSMs do NOT support 2VF. |
|||
24-04-2023, 19:35 PM,
(This post was last modified: 24-04-2023, 19:53 PM by willy26.)
Post: #7
|
|||
|
|||
RE: Retrofit Adaptive M Suspension
acsm is same
icm hw must be 5.6 its high 1.2 or 1.3 is low need two wire from icm to acsm not instaled from faktory only with icm high (24-04-2023, 19:35 PM) willy26 Wrote: acsm is same |