Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VF2
26-02-2018, 15:38 PM,
(This post was last modified: 19-09-2018, 14:39 PM by BigBoss.)
Post: #1
|
|||
|
|||
VF2
Sloved vf2
thank you guys |
|||
Reputation: +2 - cicko [+1] , Le-Mans [+1] , kh1715m [0] | |||
06-03-2018, 18:08 PM,
(This post was last modified: 06-03-2018, 18:13 PM by galingas.)
Post: #2
|
|||
|
|||
RE: VF2 Tool Flasher - Be careful, crap tool
(26-02-2018, 15:38 PM)BigBoss Wrote: Hi guys, Sorry for this experience, but this tool was zero from the start. Far from stable communication, endless promises barely making them truth, a lot of endless speeches, and miscommunication among people working in same "company". We simply can't call it a company. People with different ambitions and understanding. When we were about to talk regarding more serious plans, it appeared nobody was responsible for anything. Sorry for everyone who has or had that "tool". |
|||
14-03-2018, 21:12 PM,
Post: #3
|
|||
|
|||
RE: VF2 Tool Flasher - Be careful, crap tool
Yes is crap tool i have one customer who work with this is always only problems ...
wonder if bLASH will show something new ... Best Regards Zenter Performance FileService Stage 1-2-3
SwirlFlaps,EGR/DPF/NOX/DTC/TVA/ADBLUE/Lambda/Immo ALL OFF etc.. Licensed: WinOLS, (Damos map packs,translate)+ FRT files RESELLER EVC Master: Kess Ktag CMD Ecutek, HPTuners, bFlash SKYPE Zenter Performance WhatsApp +48 884 664 588 |
|||
14-03-2018, 21:50 PM,
Post: #4
|
|||
|
|||
RE: VF2 Tool Flasher - Be careful, crap tool
|
|||
21-03-2018, 22:22 PM,
Post: #5
|
|||
|
|||
RE: VF2 Tool Flasher - Be careful, crap tool
Hi, I am custumer of VF2 since beginning of tool and I only have good things to say about!
Tool is " only to professional" use... in bench I only use vf2 with almost all ecus, until today all ecus(and all others with same processor/memory) in list work, tool do not have many chksum, and instrucions not many too... but one time you have instrucion(can,kline,gnd and 12v, boot point),and correct chjsum when do file, work like a charm. I have many tools, all legal and make +-8 ecus all days and belive in me... very good tool. I have some friends with and all have same opinion about. Good software with chksum and good user, and one of best tool in world. Ps. All OBD protocols work fine! Like all others tools in beginning vf2 have to make decision about what is important...do not have custumers and size to make all protocols like we all like... But all now... we need many tools to do all job! Best regards |
|||
21-03-2018, 22:39 PM,
Post: #6
|
|||
|
|||
RE: VF2 Tool Flasher - Be careful, crap tool
(21-03-2018, 22:22 PM)nunoxxoliveira Wrote: Hi, I am custumer of VF2 since beginning of tool and I only have good things to say about! Nuno, do you have any idea why your opinion sounds not like a honest one, but alot more than a friendly attempt to help a "developer" from your country (Portugal)? I have seen the situation how this company was born. So it's not difficult to understand how it works and how will it end up with. Not a best advertising message though: people have reasons to explain why the VF2 is shit, which you can't even name a professional tool. |
|||
21-03-2018, 23:00 PM,
Post: #7
|
|||
|
|||
RE: VF2 Tool Flasher - Be careful, crap tool
(21-03-2018, 22:39 PM)galingas Wrote:(21-03-2018, 22:22 PM)nunoxxoliveira Wrote: Hi, I am custumer of VF2 since beginning of tool and I only have good things to say about! I now like sound. But believe me, I have good opinion about. Today I am in phone but tomorrow I can send a picture of all ecus read/write by tool, to you see I talk about my "good" experience. But like I say, I have many tools and change like car/ecu in work I do. But in bench I almost only use VF2 and make many ecus,believe me. I work since 1997 and never had a tool making work like that, very fast,very secure , and working with all ecus with processor in list. I believe many problem is chksum... or bad connection. Vf2 do not make many chksum. Best regards |
|||
21-03-2018, 23:58 PM,
Post: #8
|
|||
|
|||
RE: VF2 Tool Flasher - Be careful, crap tool
i dont have this tool but have 4 customers what have and always when they should use it never work .... support is nothing and i have one time in hand and it was like chinese digiprog....
FileService Stage 1-2-3
SwirlFlaps,EGR/DPF/NOX/DTC/TVA/ADBLUE/Lambda/Immo ALL OFF etc.. Licensed: WinOLS, (Damos map packs,translate)+ FRT files RESELLER EVC Master: Kess Ktag CMD Ecutek, HPTuners, bFlash SKYPE Zenter Performance WhatsApp +48 884 664 588 |
|||
22-03-2018, 06:51 AM,
Post: #9
|
|||
|
|||
RE: VF2 Tool Flasher - Be careful, crap tool
Nuno, I understand and clearly see you are simply trying yo protect those guys from your country, but VF2 is literally a PIECE OF SHIT. The problem is, that not enough people know that, and by accident few of them are still purchasing this peace of crap.
|
|||
04-06-2018, 00:24 AM,
Post: #10
|
|||
|
|||
RE: VF2 Tool Flasher - Be careful, crap tool
(21-03-2018, 22:22 PM)nunoxxoliveira Wrote: Hi, I am custumer of VF2 since beginning of tool and I only have good things to say about! Are you trying to protect those guys from your country ? are you working them ? go give them your money and support them |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content