Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Need Help with Kess 5.017 and Simos10
01-03-2018, 09:26 AM,
Post: #1
|
|||
|
|||
Need Help with Kess 5.017 and Simos10
Hi guys,
Recently I bought Kess 5.017 (EU version, Red PCB) I have bought it not for commercial use! Just for my car! But it can’t read my ECU... I know for sure that it should read Simos10 but it writes all the time: ECU cannot be read My car is: VW Cross Polo 6R 2010 1.2TSI CBZB ECU 03F906070D FW 9851 Simos10 I found info that sometimes ECU can be “locked” for reading, so I tried to downgrade firmware with ODIS. Successfuly downgraded but same result I would like to ask for help of professionals! Please help me fix this issue |
|||
01-03-2018, 09:42 AM,
Post: #2
|
|||
|
|||
RE: Need Help with Kess 5.017 and Simos10
I think this type of ECU must be unlocked first. I think Kess has that option for unlocking Simos ECu
|
|||
01-03-2018, 11:19 AM,
Post: #3
|
|||
|
|||
RE: Need Help with Kess 5.017 and Simos10
|
|||
05-03-2018, 12:42 PM,
Post: #4
|
|||
|
|||
RE: Need Help with Kess 5.017 and Simos10
|
|||
05-03-2018, 13:06 PM,
(This post was last modified: 05-03-2018, 13:08 PM by teerak2uk.)
Post: #5
|
|||
|
|||
Need Help with Kess 5.017 and Simos10
I had this on the same car but diesel clone not reading but my genuine tool read it.
Maybe down to the badly cracked version sw they use on v5.017 tools |
|||
06-03-2018, 07:47 AM,
(This post was last modified: 06-03-2018, 15:16 PM by Clusters.)
Post: #6
|
|||
|
|||
RE: Need Help with Kess 5.017 and Simos10
This version ksuite for kess 5.017 clone work with simos 4.5
|