Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Immo 3 manually change ID and PIN
03-03-2018, 15:53 PM,
Post: #1
Immo 3 manually change ID and PIN
Hi,

I have an Audi S3 8L cluster. Is it possible change IMMO ID, LOGIN and VIN manually in dump, so i only need to adapt keys to cluster?
Quote this message in a reply
03-03-2018, 16:25 PM,
Post: #2
RE: Immo 3 manually change ID and PIN
(03-03-2018, 15:53 PM)zix1 Wrote:  Hi,

I have an Audi S3 8L cluster. Is it possible change IMMO ID, LOGIN and VIN manually in dump, so i only need to adapt keys to cluster?

If you have dump you get login of dash and if you have login of old (if you want change it i think you know login) and login of new one and you have to learn key where is the problem to adapt ecu too?
Quote this message in a reply
[+] 2 users say Thank You to 23Andi23 for this post
03-03-2018, 16:37 PM, (This post was last modified: 03-03-2018, 16:41 PM by zix1.)
Post: #3
Immo 3 manually change ID and PIN
I know the procedure...
The the problem is that i tried to install a used cluster without success. The new(used) cluster is definatly a immo 3 cluster like the old one and both pins are known. But for some reason it doesnt work. Its also interesting that the new(used) cluster shows insted of vin just „yyyyyyyyyyyyy“.

So now i want to import IMMO ID, VIN and LOGIN from old cluster to new cluster and only adapt keys in car.
[Image: 10022d764c052db758e8c3d677e0b24c.jpg]
Quote this message in a reply
[+] 2 users say Thank You to zix1 for this post
03-03-2018, 16:40 PM,
Post: #4
RE: Immo 3 manually change ID and PIN
Do you have dumps of old and new cluster ?
Post them then

BEST CHIPTUNING SERVICE BY Zenter Performance  [Image: congrats.gif]

Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
--------------------------------------------------------------------------------------------------------------

highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/
POWER BY TECHNOLOGY drive

--------------------------------------------------------------------------------------------------------------
BEST CHIPTUNING SERVICE BY Jurebv   [Image: yes.gif]
Contact Skype: live:jure.coric_1
https://files.tuning-makarska.com/
--------------------------------------------------------------------------------------------------------------
-
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   
In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS


-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty hands  are a sign of clean money 

шшш.αήkαbôôτ.Ćô.цk
Visit this user's website
Quote this message in a reply
03-03-2018, 16:43 PM,
Post: #5
Immo 3 manually change ID and PIN
I only have the dump from new cluster but i know the login, VIN and immo ID from old cluster. Is that enough?

Is it even possible how my plans are going?
Quote this message in a reply
03-03-2018, 16:52 PM,
Post: #6
RE: Immo 3 manually change ID and PIN
You can use the tool
read the old dash Eeprom and write to the new dash, done
Quote this message in a reply
03-03-2018, 17:01 PM,
Post: #7
Immo 3 manually change ID and PIN
I dont have old cluster dump. Only new one.

Old cluster: 8L0920900 Jaeger
New cluster:8L0920930F VDO
Quote this message in a reply
03-03-2018, 17:20 PM,
Post: #8
RE: Immo 3 manually change ID and PIN
(03-03-2018, 17:01 PM)zix1 Wrote:  I dont have old cluster dump. Only new one.

Old cluster: 8L0920900 Jaeger
New cluster:8L0920930F VDO

and from where you have login for old one?
Quote this message in a reply
03-03-2018, 17:21 PM,
Post: #9
Immo 3 manually change ID and PIN
I had the car in my garage some weeks ago where i read out pin and other data. I only have screenshots but not the complete dump nospeak
Quote this message in a reply
03-03-2018, 18:10 PM,
Post: #10
RE: Immo 3 manually change ID and PIN
Try this way, good luck

http://wiki.ross-tech.com/wiki/index.php...t_Cluster)
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  I NEED PSA MD1CS003 IMMO OFF tokatli64 2 55 2 hours ago
Last Post: tokatli64
  immo toyota yaris 89661-0d276 michelespl 1 31 5 hours ago
Last Post: Black Alien
  Piaggio Porter 1.3 - Bosch M.7.8.0 F01R00DQ24 IMMO OFF blerim shehi 3 60 6 hours ago
Last Post: ROD-BENDERS
XZBMW Bmw Me7.2 immo Off aboelgood 2 47 6 hours ago
Last Post: aboelgood
  suzuki 2008 gsxr 750 immo off megodahab 0 18 Yesterday, 18:47 PM
Last Post: megodahab
  KIA CEED EDC17C08 IMMO OFF crisvenua2 1 37 Yesterday, 13:02 PM
Last Post: Stopro92
KOpel OPEL VECTRA MSA15 IMMO OFF HELP vaki1989 3 60 Yesterday, 12:52 PM
Last Post: epasha
PPeugeot edc16CP39 PSA 4007 IMMO 0FF spoool 5 252 Yesterday, 00:26 AM
Last Post: spoool
PPeugeot need change VIN spoool 3 215 24-04-2024, 23:58 PM
Last Post: spoool
  valeo V42 Immo off kuki88 2 88 24-04-2024, 22:12 PM
Last Post: Abou-raffik

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content