Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ICOM no comunication with Esys
05-03-2018, 10:10 AM,
(This post was last modified: 05-03-2018, 10:13 AM by szymoncobo.)
Post: #1
|
|||
|
|||
ICOM no comunication with Esys
Hi to All
My friend buy 2 ICOM-Clone A2 Unit work perfect with ISTA D/P but with ESYS no comunication port 50160 no answer. I use port scan on unit and all port like 6801, 6802 ..... works only 50160 didnt answer. Unit locked with EasyConnect. Can anyone help with open port 50160 ? Regards. |
|||
05-03-2018, 10:17 AM,
(This post was last modified: 05-03-2018, 10:19 AM by m35i.)
Post: #2
|
|||
|
|||
RE: ICOM no comunication with Esys
You try reserve with itool radar if not work try update you ICOM
|
|||
05-03-2018, 10:19 AM,
(This post was last modified: 05-03-2018, 10:20 AM by Spirit5676.)
Post: #3
|
|||
|
|||
RE: ICOM no comunication with Esys
I had issues with ICOM not connecting to F-series via ethernet recently. Do you have third party virus protection/firewall installed? What setting did you use to connect in E-sys? What IP? ICOM firmware? What is your ICOM IP? You can also use Itoolradar to lock ICOM.
|
|||
05-03-2018, 10:40 AM,
Post: #4
|
|||
|
|||
RE: ICOM no comunication with Esys
Icom have last firmware
No firewall and virus protection on computer. My private Icom A1 and orginall Icom Next work with it Only my friend 2 units didint work. I know all about locking unit and update firmware all works I try but no sukcess. |
|||
05-03-2018, 13:27 PM,
Post: #5
|
|||
|
|||
RE: ICOM no comunication with Esys
(05-03-2018, 10:40 AM)szymoncobo Wrote: Icom have last firmware ICOM A2 IP address? Did you run ICOM self-diagnostics? |
|||
05-03-2018, 14:12 PM,
Post: #6
|
|||
|
|||
RE: ICOM no comunication with Esys
Hi
IP 192.168.1.68 Selftest give only wlan error (no card in icom) Regards |
|||
05-03-2018, 14:54 PM,
Post: #7
|
|||
|
|||
RE: ICOM no comunication with Esys
|
|||
05-03-2018, 15:47 PM,
Post: #8
|
|||
|
|||
RE: ICOM no comunication with Esys
Yes
Computer ip 192.168.1.100 my icom next .....102 a1 .....125 |
|||
06-03-2018, 08:44 AM,
Post: #9
|
|||
|
|||
RE: ICOM no comunication with Esys
Mine runs fine without locking it. No need for iTool radar or easyconnect.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content