[szymoncobo]

Hi to All

My friend buy 2 ICOM-Clone A2
Unit work perfect with ISTA D/P but with ESYS no comunication port 50160 no answer.
I use port scan on unit and all port like 6801, 6802 ..... works only 50160 didnt answer.
Unit locked with EasyConnect.
Can anyone help with open port 50160 ?


Regards.

[m35i]

You try reserve with itool radar if not work try update you ICOM

[Spirit5676]

I had issues with ICOM not connecting to F-series via ethernet recently. Do you have third party virus protection/firewall installed? What setting did you use to connect in E-sys? What IP? ICOM firmware? What is your ICOM IP? You can also use Itoolradar to lock ICOM.

[szymoncobo]

Icom have last firmware
No firewall and virus protection on computer.
My private Icom A1 and orginall Icom Next work with it
Only my friend 2 units didint work.
I know all about locking unit and update firmware all works I try but no sukcess.

[Spirit5676]

Icom have last firmware
No firewall and virus protection on computer.
My private Icom A1 and orginall Icom Next work with it
Only my friend 2 units didint work.
I know all about locking unit and update firmware all works I try but no sukcess.

ICOM A2 IP address? Did you run ICOM self-diagnostics?

[szymoncobo]

Hi
IP 192.168.1.68

Selftest give only wlan error (no card in icom)

Regards

[Spirit5676]

Hi
IP 192.168.1.68

Selftest give only wlan error (no card in icom)

Regards

Does your A1 and ICOM next have a address from the same subnet? What is the computer IP?

[szymoncobo]

Yes
Computer ip 192.168.1.100
my icom next .....102
a1 .....125

[Mr Bimmer]

Mine runs fine without locking it. No need for iTool radar or easyconnect.