Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ K+D-can not working with E46
10-03-2018, 14:13 PM,
(This post was last modified: 14-04-2018, 00:06 AM by Clusters.)
Post: #1
|
|||
|
|||
K+D-can not working with E46
Just installed a fresh copy of ISTA-D 4.09 and the corresponding ISTA-P. Installed according to the manual. Als installed standard tools. INPA sees the car and I can check various components. However, i cannot get ISTA-D and ISTA-P to work. Comport is currently at com 9, but also tried com 1 and com 3. Latency is set to 1.
What can i do to get ISTA-D to work with the cable? It has always worked, but just re-installed my laptop. |
|||
10-03-2018, 14:17 PM,
Post: #2
|
|||
|
|||
RE: K+D-can not working with E46
Then read my FAQ for proper installation.
|
|||
17-03-2018, 19:22 PM,
Post: #3
|
|||
|
|||
RE: K+D-can not working with E46
Does your KDCAN have a Kline switch? If it does not you can forget connecting to an E46.
|
|||
17-03-2018, 23:11 PM,
Post: #4
|
|||
|
|||
RE: K+D-can not working with E46
|
|||
13-04-2018, 23:10 PM,
Post: #5
|
|||
|
|||
RE: K+D-can not working with E46
Ok, just an update on this... Stupid me... It was the switch after all... Pin7+8 problem. Now everything is working like a charm.
|
|||
14-04-2018, 07:05 AM,
Post: #6
|
|||
|
|||
RE: K+D-can not working with E46
There goes!! You learn a new thing everyday. Interesting that INPA works but ISTA insists on correct cable pin out.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content