Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ Cant read icom next (a2) clone anymore
11-03-2018, 19:11 PM, (This post was last modified: 11-03-2018, 23:33 PM by Clusters.)
Post: #1
XZBMW  Cant read icom next (a2) clone anymore
Hello all,


Today I tried to set up my icom next clone to work with ediabas. I runned Itool radar to find the ip adres from the device. Itool radar showed me 169.254.92.38.

The tutorial I used told me to give that ip into my browser and set this ip to static in the GUI from the ICOM Next. I also had to press reserve into the itool radar tool which I did. Also I edited my ediabas.ini and could connect to dr.Gini with succes. But when I disconnected everything I simply cannot connect anymore and also Itool radar doesnt show me the device anymore.
I already tried to connect with it by placing a router between my pc and the ICOM and configured the router in the range: 169.254.92.30 till 169.254.92.100 with subnetmask 255.255.0.0 but still I cannot even ping the ICOM.
Does anyone knows what I did wrong or what I can do to fix my isue? A factory reset perhaps?


Vincent
Quote this message in a reply
11-03-2018, 19:43 PM, (This post was last modified: 11-03-2018, 19:46 PM by DNK76.)
Post: #2
RE: Cant read icom next (a2) clone anymore
Restore icom to the original settings
(you can use the button to restore factory settings
DHCP, IP 169.254.92.38

Do not change anything on the network card
it has to automatically assign an address
icom A2 (clone next)
edit ediabas.ini (C: \ EDIABAS / BIN /)
Interface=REMOTE
[TCP]
;=============================================================================
RemoteHost =169.254.92.38
Port =6801


so many settings
itoolradar
icom reservation
and you will be connected

If you have EDIABAS730.msi
then do not use easyconnect

Just as you have the full standard 2.12 installed tools you can use
EasyConnect

If my post helped you hit the thanks and reputation button!under
Quote this message in a reply
[+] 4 users say Thank You to DNK76 for this post
11-03-2018, 22:01 PM,
Post: #3
RE: Cant read icom next (a2) clone anymore
Restore did the trick wink Working again jeeeej

Thanks a lot
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  CCC flash WINKFP ICOM BimmerSLO 7 81 7 minutes ago
Last Post: BimmerSLO
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,794 27-03-2024, 05:59 AM
Last Post: hashtagmaster
XZBMW Tool for bench read 8hp Garryq 9 1,572 26-03-2024, 09:32 AM
Last Post: skywoker
XZBMW Poor wifi signal from new ICOM's bmchicago 1 139 26-03-2024, 03:04 AM
Last Post: rocdeng
  E53 LCM Clone maninblack 10 258 25-03-2024, 14:03 PM
Last Post: Spitfire555
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,909 24-03-2024, 11:29 AM
Last Post: Twointje
  TESTO tool with ICOM Rolzs 5 318 17-03-2024, 20:23 PM
Last Post: Vojno
XZBMW Tool for OBD read / write ZF 8hp TIGHTFIN 7 699 10-03-2024, 07:46 AM
Last Post: syrus
  Request xHP 6HP decrypted files and icom flasher tste1982 10 834 05-03-2024, 22:47 PM
Last Post: bradsm87
  FRM repair and clone DME & DDE jaki 27 1,342 01-03-2024, 22:52 PM
Last Post: r0my81

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content