[koukou17]

Hello guys
I have lost all keys of my brava 1.9 jtd 100cv year 2000
so it does not work anymore
i tried to make an immo off with Galletto but an error appears " FAUTE CHANGEMENT DE VITESSE "
ecu : bosch 0281 010 341 edc15c7 euro 3
can anyone help me to make an immo off directly on 29f400 ?!!!
this is the dump and thanks a lot

[dexterv]

Try these ones.

[rch11]

Hello guys
I have lost all keys of my brava 1.9 jtd 100cv year 2000
so it does not work anymore
i tried to make an immo off with Galletto but an error appears " FAUTE CHANGEMENT DE VITESSE "
ecu : bosch 0281 010 341 edc15c7 euro 3
can anyone help me to make an immo off directly on 29f400 ?!!!
this is the dump and thanks a lot

Try this

[koukou17]

Try these ones.

thank you man

can you tell me which program did you use for each file ??

---

Hello guys
I have lost all keys of my brava 1.9 jtd 100cv year 2000
so it does not work anymore
i tried to make an immo off with Galletto but an error appears " FAUTE CHANGEMENT DE VITESSE "
ecu : bosch 0281 010 341 edc15c7 euro 3
can anyone help me to make an immo off directly on 29f400 ?!!!
this is the dump and thanks a lot

Try this

unfortunately it did not work
which program did you use ?

[rch11]

Try these ones.

thank you man

can you tell me which program did you use for each file ??

---

Hello guys
I have lost all keys of my brava 1.9 jtd 100cv year 2000
so it does not work anymore
i tried to make an immo off with Galletto but an error appears " FAUTE CHANGEMENT DE VITESSE "
ecu : bosch 0281 010 341 edc15c7 euro 3
can anyone help me to make an immo off directly on 29f400 ?!!!
this is the dump and thanks a lot

Try this

unfortunately it did not work
which program did you use ?

Program FLASH 29F400

Calculate the checksum before programming the Flash

In case it is not possible to read the serial FLASH 29F400:

- Remove the EEPROM 95P08 and try to make the reading of FLASH.

or

- Program the EEPROM 95P08 procedure with partial and try to make the reading of the FLASH

K Line Communication
Pin 1 =-12V
Pin 4 = +12 V
Pin 58 = +12 V
Pin 48 = K line

[dexterv]

I used Aetool, meucci and carsoftware.

[reda75]

Hi Try this work 100% remove the immo box

[koukou17]

Hi Try this work 100% remove the immo box

thanks man i will try this

Can you tell me which program you used ??
coz i tried MEUCCI UID AETOOL CARSOFTWARE but did not work

[koukou17]

Still looking for a working off

[skens]

Hi
try this,send report
remove immo box
regards