Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. AutoHex II

  2. CarLabImmo



CGDI BMW Keytool Feedback
17-03-2018, 17:31 PM, (This post was last modified: 17-03-2018, 17:49 PM by ROD-BENDERS.)
Post: #1
CGDI BMW Keytool Feedback
All feedback from owners of CGDI BMW keytool post here please guys happy

Tight lines and bending rods are what makes my day biggrin

Dont PM asking me for files ! Post them in the forum where we can help.
Reputation: +2 - CHIKODIAG [+1] , raffy haddad [+1]
Quote this message in a reply
[+] 8 users say Thank You to ROD-BENDERS for this post
19-03-2018, 11:04 AM,
Post: #2
RE: CGDI BMW Keytool Feedback
(17-03-2018, 17:31 PM)ROD-BENDERS Wrote:  All feedback from owners of CGDI BMW keytool post here please guys happy

Excellent tool so far. no bricks or problems.

extremely fast for cas1, 2 & 3

for cas3+ if need downgrade 10 minutes and seems safe, ISN read from DME 10 minutes does not support all DME is down side.

make sure you have proper power on the car

cas4 /+ did not check.
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 4 users say Thank You to ahmadarifai for this post
19-03-2018, 15:59 PM, (This post was last modified: 19-03-2018, 16:00 PM by slaw1971.)
Post: #3
RE: CGDI BMW Keytool Feedback
cas4 F10 - ok (new key)
cas4+ F10 - ok (new key) isn from org key or dump DME
fem/bdc F31 - ok - reset mileage, change isn, change vin, make keys with oryginal key and with dump from DDE
cas3+ E60- ok , downgrade and make key with isn from org key
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 5 users say Thank You to slaw1971 for this post
20-03-2018, 07:30 AM,
Post: #4
RE: CGDI BMW Keytool Feedback
i was thinking of getting this tool, i currently have ak90 mainly for ews4 and multi tool v7.7 i use for cas. i want to be able to make cas4 as well so i think cdgi would be good for me.

questions. on tool info it says supports bmw key unlock, does that mean i can reuse a old key and reprogram it?

also how safe if downloading for cas3+, i only ran into this issue one time and i did not downgrade as worried mess things up. im curious how well this programmer works. if anyone who has this doesnt mind me messaging them with questions ill appreciate it.
Quote this message in a reply
03-04-2018, 06:20 AM,
Post: #5
RE: CGDI BMW Keytool Feedback
(20-03-2018, 07:30 AM)Cniksor Wrote:  i was thinking of getting this tool, i currently have ak90 mainly for ews4 and multi tool v7.7 i use for cas. i want to be able to make cas4 as well so i think cdgi would be good for me.

questions. on tool info it says supports bmw key unlock, does that mean i can reuse a old key and reprogram it?

also how safe if downloading for cas3+, i only ran into this issue one time and i did not downgrade as worried mess things up. im curious how well this programmer works. if anyone who has this doesnt mind me messaging them with questions ill appreciate it.
Yes, you can reuse an old key and reprogram it.
and yes it is safe if downgrade for CAS3+.
Please believe me.cheers
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 4 users say Thank You to sunshine2018 for this post
07-04-2018, 06:06 AM,
Post: #6
RE: CGDI BMW Keytool Feedback
So I purchased the cgdi programer. I figured out how make key for cas2-3 but I can’t figure out how to use this programer for cas4? I tried looking online but only find for cas3,no instructions for cas4, can anyone tell me steps for cas4 I have f10 I can try one.
Quote this message in a reply
07-04-2018, 07:22 AM,
Post: #7
RE: CGDI BMW Keytool Feedback
(07-04-2018, 06:06 AM)Cniksor Wrote:  So I purchased the cgdi programer. I figured out how make key for cas2-3 but I can’t figure out how to use this programer for cas4? I tried looking online but only find for cas3,no instructions for cas4, can anyone tell me steps for cas4 I have f10 I can try one.
Cas4 can only be done by reading DFlash from Freescale cpu then load into programmer software and generade key. It can no ne done by obd.

You need xprog or vvdi prog to read the dflash.

Sent from my Pixel 2 using Tapatalk
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 2 users say Thank You to rautolock for this post
10-04-2018, 21:47 PM,
Post: #8
RE: CGDI BMW Keytool Feedback
CGDI BMW need to pay every 6 month subscription same as CGDI Mercedes ?
Quote this message in a reply
11-04-2018, 06:55 AM,
Post: #9
RE: CGDI BMW Keytool Feedback
(10-04-2018, 21:47 PM)HeXeN Wrote:  CGDI BMW need to pay every 6 month subscription same as CGDI Mercedes ?

no
work like VVDI2 - synchronization every mounth
Quote this message in a reply
[+] 1 user says Thank You to slaw1971 for this post
12-04-2018, 15:27 PM,
Post: #10
RE: CGDI BMW Keytool Feedback
Can you tell me if CGDI has same or more functions than vvdi2 bmw activation? thanks
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
0Immo VVDI PROG Support/Feedback Thread Czozen 212 33,184 16-11-2018, 15:36 PM
Last Post: sqlkarol
0Immo Xhorse vvdi2 tool Technical Support & Feedback volavka 151 32,695 08-11-2018, 22:06 PM
Last Post: krug
  FVDI Feedback / questions and answers klostazy 334 53,067 07-11-2018, 11:00 AM
Last Post: kashalot
YTMercedes CGDI MB BenzMonster key tool feedback obdtool 127 22,041 07-11-2018, 05:58 AM
Last Post: rocris
  Smok J-TAG Support/Feedback Thread volavka 12 4,978 08-09-2018, 08:06 AM
Last Post: lupu_sandu
PPeugeot OBDSTAR H108 PSA FEEDBACK Stefano G 2 185 02-09-2018, 20:18 PM
Last Post: CHIKODIAG
  Key Master/Key Master DP FEEDBACK mar.wo 27 4,221 28-08-2018, 06:50 AM
Last Post: sunshine2018
  Solved ✔ CGDI BMW ISN reading from MSV80 issues koziol 2 347 25-08-2018, 23:51 PM
Last Post: koziol
  CGDI 7Gtronic Selectronic 0 120 10-08-2018, 17:47 PM
Last Post: Selectronic
YTMercedes Cheater cgdi company is back zgjana 3 376 20-07-2018, 08:00 AM
Last Post: ROD-BENDERS

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content