ATTENTION !! Users which have not any posts were deleted !
  1. New Emulator

  2. Julie Emulator

  3. Immo Bypass

  4. HEXPROG



CGDI BMW Keytool Feedback
16-04-2018, 12:02 PM,
Post: #11
RE: CGDI BMW Keytool Feedback
I think i need to buy this tool
Quote this message in a reply
19-04-2018, 05:30 AM,
Post: #12
RE: CGDI BMW Keytool Feedback
(03-04-2018, 06:20 AM)sunshine2018 Wrote:  
(20-03-2018, 07:30 AM)Cniksor Wrote:  i was thinking of getting this tool, i currently have ak90 mainly for ews4 and multi tool v7.7 i use for cas. i want to be able to make cas4 as well so i think cdgi would be good for me.

questions. on tool info it says supports bmw key unlock, does that mean i can reuse a old key and reprogram it?

also how safe if downloading for cas3+, i only ran into this issue one time and i did not downgrade as worried mess things up. im curious how well this programmer works. if anyone who has this doesnt mind me messaging them with questions ill appreciate it.
Yes, you can reuse an old key and reprogram it.
and yes it is safe if downgrade for CAS3+.
Please believe me.cheers

hi how do you unlock the key and reuse did you try this?

thank you for your support
Quote this message in a reply
24-04-2018, 03:04 AM,
Post: #13
RE: CGDI BMW Keytool Feedback
(19-04-2018, 05:30 AM)ahmadarifai Wrote:  
(03-04-2018, 06:20 AM)sunshine2018 Wrote:  
(20-03-2018, 07:30 AM)Cniksor Wrote:  i was thinking of getting this tool, i currently have ak90 mainly for ews4 and multi tool v7.7 i use for cas. i want to be able to make cas4 as well so i think cdgi would be good for me.

questions. on tool info it says supports bmw key unlock, does that mean i can reuse a old key and reprogram it?

also how safe if downloading for cas3+, i only ran into this issue one time and i did not downgrade as worried mess things up. im curious how well this programmer works. if anyone who has this doesnt mind me messaging them with questions ill appreciate it.
Yes, you can reuse an old key and reprogram it.
and yes it is safe if downgrade for CAS3+.
Please believe me.cheers

hi how do you unlock the key and reuse did you try this?

thank you for your support

their is a button that says unlock key. i tried and worked with aftermarket key, did not try on a original bmw key to unlock(tested on e60 cas2)
Quote this message in a reply
[-] The following 3 users say Thank You to Cniksor for this post:
  • ahmadarifai, ahmadarifai, ahmadarifai
03-08-2018, 18:06 PM,
Post: #14
RE: CGDI BMW Keytool Feedback
I am having trouble with my tool right now. I was told to update the software but it didnt work. I have installed all of the older versions that I can find online. The program always throws an error 25E1 Invalid device status. I have tried updating the tool with no luck, same error. If I remove the software and install the version on the cgdishop website then I get an error 26E1 and the error message is in chinese so I can not read it. I have sent multiple screen shots to uobdii as they asked but they have not been able to help me. My serial number is 10000429. I have installed this on multiple computers with the same error. Do you have any thoughts that might help me? I have owned this for about 8 months.
Quote this message in a reply
08-08-2018, 05:30 AM,
Post: #15
RE: CGDI BMW Keytool Feedback
for cas3+ or istap when downgrading anyone have good success? i have not tried yet, also will original key still work?

when making a key with cgdi, it says if key is smart key it will be unlocked. does this mean if i make a new key, the old key will not work?
Quote this message in a reply
14-08-2018, 17:23 PM,
Post: #16
RE: CGDI BMW Keytool Feedback
So does anyone know how to get a hold of support for this tool?
Quote this message in a reply
15-08-2018, 01:29 AM,
Post: #17
RE: CGDI BMW Keytool Feedback
even if you get someone they dont know what you talking about
i ask them about few things ,no help at all
Quote this message in a reply
15-08-2018, 01:45 AM,
Post: #18
RE: CGDI BMW Keytool Feedback
(15-08-2018, 01:29 AM)koziol Wrote:  even if you get someone they dont know what you talking about
i ask them about few things ,no help at all

CGDI Project gasping out his last breath mate smile
this happens when Technical Support know nothing about your Question rolling

Good Luck yes

BEST CHIPTUNING SERVICE BY Zenter Performance  yes
Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
-----------------------------------------------------------------------------------------------------------------
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   yes 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS

-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty handsmechanic   are a sign of clean money  cash
Visit this user's website
Quote this message in a reply
[-] The following 3 users say Thank You to volavka for this post:
  • koziol, koziol, koziol
23-08-2018, 11:21 AM,
Post: #19
RE: CGDI BMW Keytool Feedback
My tool wont activate. The tool did work. I have downloaded the latest software from the manufacturer and installed it on 3 different computers. I keep getting a 2E61 error message and some chinese writing. I have sent pictures to Anna, obdii, cgdi and all other tech support I can find on skype or email. I have had no one with a solution. They take a day to respond and tell me engineer says to download latest software. Obviously thats not the problem. It seems like an activation issue with their server. Not sure what to do at this point.
Quote this message in a reply
24-08-2018, 05:08 AM,
Post: #20
RE: CGDI BMW Keytool Feedback
(23-08-2018, 11:21 AM)dfitz21 Wrote:  My tool wont activate. The tool did work. I have downloaded the latest software from the manufacturer and installed it on 3 different computers. I keep getting a 2E61 error message and some chinese writing. I have sent pictures to Anna, obdii, cgdi and all other tech support I can find on skype or email. I have had no one with a solution. They take a day to respond and tell me engineer says to download latest software. Obviously thats not the problem. It seems like an activation issue with their server. Not sure what to do at this point.

mine has activated no issues, updates and everything fine. this programmer has been very good and ive never had an issue. i havnt need to contact support yet.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  FVDI Feedback / questions and answers klostazy 370 131,330 18-09-2020, 19:27 PM
Last Post: Pentheus
0Immo Renolink Support/Feedback volavka 51 16,263 18-09-2020, 13:55 PM
Last Post: darek_naprawa
  HEXTAG By Microtronik Support / Feedback volavka 155 35,138 17-09-2020, 06:01 AM
Last Post: MTKAutoHex
  AUTEl XP401 - opiniones, feedback borysgo2 3 309 04-09-2020, 04:48 AM
Last Post: PDXAutoworks
YTMercedes CGDI MB BenzMonster key tool feedback obdtool 143 53,732 29-08-2020, 11:26 AM
Last Post: sqlkarol
XZBMW Xhorse vvdi bmw tool Technical Support & Feedback huzionet 58 10,982 07-08-2020, 18:47 PM
Last Post: onliest
0Immo Xhorse vvdi2 tool Technical Support & Feedback volavka 189 72,375 07-08-2020, 05:31 AM
Last Post: raffy haddad
YTMercedes W204 ALL KEYS LOST CGDI 12manux 6 1,283 20-06-2020, 18:56 PM
Last Post: 12manux
XZBMW CGDI BMW Support & Feedback kimz 2 1,078 18-04-2020, 17:44 PM
Last Post: Ckh091020
0Immo VVDI PROG Support/Feedback Thread Czozen 245 86,652 13-04-2020, 17:36 PM
Last Post: Vojno

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content