Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

CGDI BMW Keytool Feedback
17-03-2018, 17:31 PM, (This post was last modified: 17-03-2018, 17:49 PM by ROD-BENDERS.)
Post: #1
CGDI BMW Keytool Feedback
All feedback from owners of CGDI BMW keytool post here please guys happy

[Image: OxNUyuy.jpg]All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need.
Reputation: +2 - CHIKODIAG [+1] , raffy haddad [+1]
Quote this message in a reply
[+] 17 users say Thank You to ROD-BENDERS for this post
19-03-2018, 11:04 AM,
Post: #2
RE: CGDI BMW Keytool Feedback
(17-03-2018, 17:31 PM)ROD-BENDERS Wrote:  All feedback from owners of CGDI BMW keytool post here please guys happy

Excellent tool so far. no bricks or problems.

extremely fast for cas1, 2 & 3

for cas3+ if need downgrade 10 minutes and seems safe, ISN read from DME 10 minutes does not support all DME is down side.

make sure you have proper power on the car

cas4 /+ did not check.
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 9 users say Thank You to ahmadarifai for this post
19-03-2018, 15:59 PM, (This post was last modified: 19-03-2018, 16:00 PM by slaw1971.)
Post: #3
RE: CGDI BMW Keytool Feedback
cas4 F10 - ok (new key)
cas4+ F10 - ok (new key) isn from org key or dump DME
fem/bdc F31 - ok - reset mileage, change isn, change vin, make keys with oryginal key and with dump from DDE
cas3+ E60- ok , downgrade and make key with isn from org key
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 10 users say Thank You to slaw1971 for this post
20-03-2018, 07:30 AM,
Post: #4
RE: CGDI BMW Keytool Feedback
i was thinking of getting this tool, i currently have ak90 mainly for ews4 and multi tool v7.7 i use for cas. i want to be able to make cas4 as well so i think cdgi would be good for me.

questions. on tool info it says supports bmw key unlock, does that mean i can reuse a old key and reprogram it?

also how safe if downloading for cas3+, i only ran into this issue one time and i did not downgrade as worried mess things up. im curious how well this programmer works. if anyone who has this doesnt mind me messaging them with questions ill appreciate it.
Quote this message in a reply
03-04-2018, 06:20 AM,
Post: #5
RE: CGDI BMW Keytool Feedback
(20-03-2018, 07:30 AM)Cniksor Wrote:  i was thinking of getting this tool, i currently have ak90 mainly for ews4 and multi tool v7.7 i use for cas. i want to be able to make cas4 as well so i think cdgi would be good for me.

questions. on tool info it says supports bmw key unlock, does that mean i can reuse a old key and reprogram it?

also how safe if downloading for cas3+, i only ran into this issue one time and i did not downgrade as worried mess things up. im curious how well this programmer works. if anyone who has this doesnt mind me messaging them with questions ill appreciate it.
Yes, you can reuse an old key and reprogram it.
and yes it is safe if downgrade for CAS3+.
Please believe me.cheers
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 8 users say Thank You to sunshine2018 for this post
07-04-2018, 06:06 AM,
Post: #6
RE: CGDI BMW Keytool Feedback
So I purchased the cgdi programer. I figured out how make key for cas2-3 but I can’t figure out how to use this programer for cas4? I tried looking online but only find for cas3,no instructions for cas4, can anyone tell me steps for cas4 I have f10 I can try one.
Quote this message in a reply
07-04-2018, 07:22 AM,
Post: #7
RE: CGDI BMW Keytool Feedback
(07-04-2018, 06:06 AM)Cniksor Wrote:  So I purchased the cgdi programer. I figured out how make key for cas2-3 but I can’t figure out how to use this programer for cas4? I tried looking online but only find for cas3,no instructions for cas4, can anyone tell me steps for cas4 I have f10 I can try one.
Cas4 can only be done by reading DFlash from Freescale cpu then load into programmer software and generade key. It can no ne done by obd.

You need xprog or vvdi prog to read the dflash.

Sent from my Pixel 2 using Tapatalk
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 4 users say Thank You to rautolock for this post
10-04-2018, 21:47 PM,
Post: #8
RE: CGDI BMW Keytool Feedback
CGDI BMW need to pay every 6 month subscription same as CGDI Mercedes ?
Quote this message in a reply
11-04-2018, 06:55 AM,
Post: #9
RE: CGDI BMW Keytool Feedback
(10-04-2018, 21:47 PM)HeXeN Wrote:  CGDI BMW need to pay every 6 month subscription same as CGDI Mercedes ?

no
work like VVDI2 - synchronization every mounth
Quote this message in a reply
[+] 2 users say Thank You to slaw1971 for this post
12-04-2018, 15:27 PM,
Post: #10
RE: CGDI BMW Keytool Feedback
Can you tell me if CGDI has same or more functions than vvdi2 bmw activation? thanks
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  FVDI Feedback / questions and answers klostazy 372 149,095 01-01-2024, 21:34 PM
Last Post: jansmerfowski
0Immo Vapon vp996 feedback ruisam 0 145 20-12-2023, 01:34 AM
Last Post: ruisam
  Members Feedback for Autel MaxiIM IM508 / IM608 / IM608 PRO requested CATAHA 19 5,683 16-10-2023, 10:45 AM
Last Post: kiruxxx
0Immo Renolink Support/Feedback volavka 49 28,026 07-10-2023, 12:24 PM
Last Post: wauzzz
  VW PASSAT B6 NEW EMULATOR ESL FEEDBACK 12manux 6 844 05-10-2023, 10:26 AM
Last Post: 12manux
XZBMW Xhorse vvdi bmw tool Technical Support & Feedback huzionet 12 4,733 14-09-2023, 13:43 PM
Last Post: MORKAS
0Immo VVDI PROG Support/Feedback Thread Czozen 253 111,440 25-06-2023, 07:50 AM
Last Post: Vigi
  CAS3+ key data to ISN with CGDI BMW kalosbg 2 554 11-05-2023, 13:57 PM
Last Post: kalosbg
0Immo CGDI or VVDI Schnitzer 2 583 25-04-2023, 07:22 AM
Last Post: ROD-BENDERS
0Immo Xhorse vvdi2 tool Technical Support & Feedback volavka 166 79,405 13-12-2022, 15:51 PM
Last Post: tfp3

Forum Jump:


Users browsing this thread:
6 Guest(s)

Return to TopReturn to Content