Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

CGDI BMW Keytool Feedback
25-08-2018, 23:47 PM,
Post: #21
RE: CGDI BMW Keytool Feedback
so far i tried it to read ISN form MSV80 result OK
read and wright ISN cas 3 result OK
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 2 users say Thank You to koziol for this post
07-09-2018, 19:39 PM,
Post: #22
RE: CGDI BMW Keytool Feedback
Just did a 2008 E60 CAS3+ had to DOWNGRADE it took about 10min and programmed key successfully, when I started the car there was a Check Engine light i forgot to check the faults but just cleared them and all gone, now im im scratching me head what they were, anyone experienced that ?
Quote this message in a reply
08-09-2018, 11:24 AM,
Post: #23
RE: CGDI BMW Keytool Feedback
Did a 2008 E60 528i it asked for DownGrade it took around 10min no error codes this time all perfect key works
Quote this message in a reply
[+] 1 user says Thank You to Impac for this post
04-10-2018, 17:34 PM, (This post was last modified: 04-10-2018, 20:16 PM by Impac.)
Post: #24
RE: CGDI BMW Keytool Feedback
2008 BMW E82 CAS3+ #9389115 Downgrade needed,  after downgrade RED STEERING WHEEL SIGN no ignition even with original key, tried to reset ELV and it did not work, car dont start and no ignition on any key programming was successful to new key

These are the error codes 
CAS 
A0AA
A0AB
Red Steering Wheel sign tried to reset both with tool32 and nothing
Tool32 
[font=.SF UI Text][font=.SFUIText]steuern_elvcounter_cas_loeschen[/font][/font]
[font=.SF UI Text][font=.SFUIText]steuern_elvcounter_elv_loeschen[/font][/font]

And from which i dont think its related 
JBBF 
C90B
C91E

Does that mean CAS WILL NEED NEW DUMP loaded on Bench ?
Quote this message in a reply
22-11-2018, 06:17 AM,
Post: #25
RE: CGDI BMW Keytool Feedback
(04-10-2018, 17:34 PM)Impac Wrote:  2008 BMW E82 CAS3+ #9389115 Downgrade needed,  after downgrade RED STEERING WHEEL SIGN no ignition even with original key, tried to reset ELV and it did not work, car dont start and no ignition on any key programming was successful to new key

These are the error codes 
CAS 
A0AA
A0AB
Red Steering Wheel sign tried to reset both with tool32 and nothing
Tool32 
[font=.SF UI Text][font=.SFUIText]steuern_elvcounter_cas_loeschen[/font][/font]
[font=.SF UI Text][font=.SFUIText]steuern_elvcounter_elv_loeschen[/font][/font]

And from which i dont think its related 
JBBF 
C90B
C91E

Does that mean CAS WILL NEED NEW DUMP loaded on Bench ?

NEED reset ELV counter thats it car will start also removing battery for few minutes will also work. all 2007 2008 2006 models will give this error.

try scan tool like launch or tool32 to reset
Quote this message in a reply
30-12-2018, 05:03 AM,
Post: #26
XZBMW  RE: CGDI BMW Keytool Feedback
I think the tool has come a long way from the time i purchased it.
Yes its not perfect, but is there such thing as a perfect tool.

I have cloned FEM units f20, F30.
I have made up a fem units for cars that had them missing.
I have done a good few cas 3+ downgrade mode no problems.
Using F coding and programming i have coded 2nd hand units to the car and then ista accepts it in programming plan,(Previously rejected in plan) (Rem, lights etc.).

I have had one or two unsupported errors, but with further investigation i find its uncommon processor.
Then not even R270 reads it i have to use X-Prog.

For me the CGDI has been a great investment.
The functions are growing, updates all the time.
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 2 users say Thank You to Kenny for this post
02-01-2019, 05:14 AM,
Post: #27
RE: CGDI BMW Keytool Feedback
I'm interesed to buy that tool.
What aboute additional authorization like:
- data modification and veryfication
- f series coding

It's good to have it too?
What aboute subscription or tokens. Is there something like that?
Or just we buy tool and using all functionality?

If I helped, please magic buttons thx+rep yes yes yes under under under
Quote this message in a reply
02-01-2019, 05:39 AM,
Post: #28
RE: CGDI BMW Keytool Feedback
any one try CGDI to remove EGS ISN and if working fine?


Attached Files Thumbnail(s)
   
Quote this message in a reply
23-01-2019, 11:12 AM,
Post: #29
RE: CGDI BMW Keytool Feedback
hi

any one try CGDI to remove EGS ISN and if working fine?

I m interested to know if it can make 6hp and 8 hp virgin ?

regards

Adel
Quote this message in a reply
30-01-2019, 06:53 AM,
Post: #30
RE: CGDI BMW Keytool Feedback
(25-08-2018, 23:47 PM)koziol Wrote:  so far i tried it to read ISN form MSV80 result OK
read and wright ISN cas 3 result OK

I have been thinking of this tool instead of Autohex. But only if it can read 128bit ISN from other DMES. Can it do more DMEs than just MSV80, even if on bench? I just need a tool that can read ISNs from DMEs so I can write the same to CAS3 or CAS4 or FEM/BDC
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  FVDI Feedback / questions and answers klostazy 372 149,025 01-01-2024, 21:34 PM
Last Post: jansmerfowski
0Immo Vapon vp996 feedback ruisam 0 145 20-12-2023, 01:34 AM
Last Post: ruisam
  Members Feedback for Autel MaxiIM IM508 / IM608 / IM608 PRO requested CATAHA 19 5,673 16-10-2023, 10:45 AM
Last Post: kiruxxx
0Immo Renolink Support/Feedback volavka 49 28,006 07-10-2023, 12:24 PM
Last Post: wauzzz
  VW PASSAT B6 NEW EMULATOR ESL FEEDBACK 12manux 6 844 05-10-2023, 10:26 AM
Last Post: 12manux
XZBMW Xhorse vvdi bmw tool Technical Support & Feedback huzionet 12 4,733 14-09-2023, 13:43 PM
Last Post: MORKAS
0Immo VVDI PROG Support/Feedback Thread Czozen 253 111,398 25-06-2023, 07:50 AM
Last Post: Vigi
  CAS3+ key data to ISN with CGDI BMW kalosbg 2 552 11-05-2023, 13:57 PM
Last Post: kalosbg
0Immo CGDI or VVDI Schnitzer 2 583 25-04-2023, 07:22 AM
Last Post: ROD-BENDERS
0Immo Xhorse vvdi2 tool Technical Support & Feedback volavka 166 79,391 13-12-2022, 15:51 PM
Last Post: tfp3

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content