Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Xentry Diagnostics PassThru (09.2018)
17-03-2018, 23:54 PM, (This post was last modified: 15-09-2018, 23:14 PM by CT120.)
Post: #1
YTMercedes  Xentry Diagnostics PassThru (09.2018)
Xentry Diagnostics PassThru (09.2018)

Password on PM ( only ask Real Members )


Attached Files
Xentry Diagnostics PassThru OpenShell 2018-07 [Torrent].rar
File Type: .rar
Downloaded: 280 times
Size: 288.78 KB

XDOS PassThru 09.2018 Smallville.rar
File Type: .rar
Downloaded: 248 times
Size: 380 bytes

Reputation: +33 - McMihai [+1] , yur65 [+1] , pesona [+1] , spider80 [+1] , Joe2 [+1] , mrahman [+1] , camaro [+1] , adam19781107 [+1] , liusberg [+1] , vierchatura [+1] , crackos20 [+1] , vision [+1] , khlui02 [+1] , advanced [+1] , rocdeng [+1] , worldbenz2015 [+1] , billymatlock1 [+1] , paino [+1] , meiguang [+1] , vasilios [+1] , MARTINHDX [+1] , odis [+1] , chong5195 [+1] , JarsaR [+1] , smlee747 [+1] , W123 [+1] , fatzz [+1] , zmann [+1] , xtac1080 [+1] , StevenHo [+1] , zuzuss [+1] , pavlo321 [+1] , Arual [+1]
Quote this message in a reply
[+] 110 users say Thank You to CT120 for this post
18-03-2018, 22:45 PM,
Post: #2
RE: Xentry Diagnostics PassThru (03.2018)
Does 03/18 include all modules or just ECM/TCM?
Quote this message in a reply
19-03-2018, 04:46 AM,
Post: #3
RE: Xentry Diagnostics PassThru (03.2018)
(18-03-2018, 22:45 PM)Acrawford Wrote:  Does 03/18 include all modules or just ECM/TCM?

Xentry Passthru works with all modules. The only difference is it only works with CAN modules and you can use any J2534 device with it. So 2006 and up vehicles.
Quote this message in a reply
[+] 2 users say Thank You to MBENZTECH for this post
19-03-2018, 08:11 AM,
Post: #4
RE: Xentry Diagnostics PassThru (03.2018)
I am test Xentry Passthru 12.2017 with VAS5054 on C203 2003. all work without problem. on k line too.
Quote this message in a reply
[+] 3 users say Thank You to Azlina for this post
19-03-2018, 08:26 AM,
Post: #5
RE: Xentry Diagnostics PassThru (03.2018)
(19-03-2018, 04:46 AM)MBENZTECH Wrote:  
(18-03-2018, 22:45 PM)Acrawford Wrote:  Does 03/18 include all modules or just ECM/TCM?

Xentry Passthru works with all modules. The only difference is it only works with CAN modules and you can use any J2534 device with it. So 2006 and up vehicles.

Technically yes, but it is artificially restricted according to the StartKey you are assigned based off of your HWID number given to Daimler, which in the US is restricted to emissions related control modules before MY 2018.
Quote this message in a reply
[+] 2 users say Thank You to W123 for this post
21-03-2018, 02:22 AM, (This post was last modified: 21-03-2018, 02:26 AM by MBENZTECH.)
Post: #6
RE: Xentry Diagnostics PassThru (03.2018)
(19-03-2018, 08:26 AM)W123 Wrote:  
(19-03-2018, 04:46 AM)MBENZTECH Wrote:  
(18-03-2018, 22:45 PM)Acrawford Wrote:  Does 03/18 include all modules or just ECM/TCM?

Xentry Passthru works with all modules. The only difference is it only works with CAN modules and you can use any J2534 device with it. So 2006 and up vehicles.

Technically yes, but it is artificially restricted according to the StartKey you are assigned based off of your HWID number given to Daimler, which in the US is restricted to emissions related control modules before MY 2018.

Of course. But if you activate it with developer keys then you have access to all modules and all vehicles.

(19-03-2018, 08:11 AM)Azlina Wrote:  I am test Xentry Passthru 12.2017 with VAS5054 on C203 2003. all work without problem. on k line too.

Really? Do you have a clone VAS5054? What windows version are you using? I have used several J2534 devices and none can do K-line. I have used Mongoose Pro2 cable and GM MDI2.
Quote this message in a reply
25-03-2018, 01:48 AM,
Post: #7
RE: Xentry Diagnostics PassThru (03.2018)
VAS5054a is a K-line, L-line, low and high speed CANBUS device + UDS. But I would think it depends on the drivers and firmware used.
Quote this message in a reply
01-04-2018, 21:40 PM,
Post: #8
RE: Xentry Diagnostics PassThru (03.2018)
(25-03-2018, 01:48 AM)Enabled Wrote:  VAS5054a is a K-line, L-line, low and high speed CANBUS device + UDS. But I would think it depends on the drivers and firmware used.
If it is true - is very good news.
Quote this message in a reply
07-04-2018, 19:45 PM, (This post was last modified: 07-04-2018, 19:45 PM by Enabled.)
Post: #9
RE: Xentry Diagnostics PassThru (03.2018)
I have used my VAS5054a with 2006 Mercedes CLS55 AMG, 2007 R class, 2008 Sprinter, all in DAS. Everything worked except ignition sensing.

I used VAS5054a with 2014 C 250 using Xentry, everything works fine, no ignition sense, but Xentry gives you a checkbox to manually select.
I have not tried older than 2006 for Mercedes, but I am sure the limitation is in software/drivers.

I have used VAS5054a with Honda HDS on a 2000 Honda CRV (K-line only) and everything worked fine.
Also with Toyota Techstream on mid 2000s cars and vans.

And of course with VAG products.
Quote this message in a reply
08-04-2018, 10:04 AM, (This post was last modified: 08-04-2018, 10:08 AM by sixcode.)
Post: #10
RE: Xentry Diagnostics PassThru (03.2018)
(07-04-2018, 19:45 PM)Enabled Wrote:  I have used my VAS5054a with 2006 Mercedes CLS55 AMG, 2007 R class, 2008 Sprinter, all in DAS. Everything worked except ignition sensing.

I used VAS5054a with 2014 C 250 using Xentry, everything works fine, no ignition sense, but Xentry gives you a checkbox to manually select.
I have not tried older than 2006 for Mercedes, but I am sure the limitation is in software/drivers.

I have used VAS5054a with Honda HDS on a 2000 Honda CRV (K-line only) and everything worked fine.
Also with Toyota Techstream on mid 2000s cars and vans.

And of course with VAG products.

there is a big discussion on ignition in das/xentry on forum with solution....info

edit

also look here for it

https://cartechnology.co.uk/showthread.php?tid=31441

Don't PM me for SW keys, FRM, Licences, radio codes or similar, you will not get any answer...
Quote this message in a reply
[+] 6 users say Thank You to sixcode for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
YTMercedes New 2024 xentry KG? Rik 9 1,321 Yesterday, 20:50 PM
Last Post: djtosko
YTMercedes Xentry New Long Key (original key) 1st web free service pesona 1,584 148,039 26-03-2024, 20:25 PM
Last Post: Delphi2002
YTMercedes HHT-Win 64bit With Xentry XDOS 2023.03 One Click JackyTran 6 1,565 26-03-2024, 16:21 PM
Last Post: Djkalash
YTMercedes How to Install Xentry PassThru 03.2022 Flawlessly margut 1 1,629 23-03-2024, 15:29 PM
Last Post: head
YTMercedes Xentry Passthru 06.2023 J2534 Openport VCX + Keygen pitercie 2 468 23-03-2024, 15:29 PM
Last Post: head
  Xentry 2024.03 - PT & XDOS renia1983 19 2,101 17-03-2024, 19:35 PM
Last Post: gcs190
YTMercedes XENTRY DAS Activation Here takis 2,422 618,117 15-03-2024, 10:24 AM
Last Post: Mario68
  03 2024 Xentry Final version ross2018 9 903 14-03-2024, 23:37 PM
Last Post: connector
YTMercedes XENTRY AIO FULL FIX [2023.09-R2 & 2023.12-R2] [UPDATED 21/12/2023] crypt0ninja 153 30,427 06-03-2024, 17:32 PM
Last Post: db8000
  Xentry 09/12.2021 WIFI Solution gcs190 11 4,814 29-02-2024, 13:33 PM
Last Post: gcs190

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content