Possibly Related Threads…

***Shinoby*** · 28-03-2018, 14:56 PM,

(28-03-2018, 12:36 PM)bgpavlp Wrote: hi all,
after unzip, ISTA-P not start. I test whit loader v6.1 and v.6.3?
I unzip in C:\BMW\
and notebook is Lenovo x201 whit Windows XP

New versions of ISTA doesn't support Windows XP!

Don't forget press [Image: postbit_thx.gif]

and

, if my post helped you.

***georgia55*** · 29-03-2018, 13:33 PM,

@Spider80 when do you make new standalone 04.10.30?
I am excited about your work.
Thank you for everything

***ReitiRight*** · 29-03-2018, 14:32 PM,

Is there any solution when the programming system (PSdZ) could not be initialised?

(At the first run I forgot to disable my firewall and the virus scanner scanned a file - but the virus scanner said everything is ok).

***Stromag*** · 29-03-2018, 17:15 PM,

(29-03-2018, 14:32 PM)ReitiRight Wrote: Is there any solution when the programming system (PSdZ) could not be initialised?

(At the first run I forgot to disable my firewall and the virus scanner scanned a file - but the virus scanner said everything is ok).

Do you have SDP data installed and registered in the Reg?

***ferrarif1*** · (This post was last modified: 30-03-2018, 02:00 AM by ferrarif1.)

Has anyone else tried software updating complete car in ISTA-D and found missing files? I am trying to update an F80 and am missing SWFL-0002794-71.8B.02.

***bmwadriatic*** · 30-03-2018, 21:03 PM,

(29-03-2018, 14:32 PM)ReitiRight Wrote: Is there any solution when the programming system (PSdZ) could not be initialised?

(At the first run I forgot to disable my firewall and the virus scanner scanned a file - but the virus scanner said everything is ok).

Have same message every time starting diagnostic on vehicle, SDP and BLP Data i did not install, because i have no ICOM, only DCAN and ENET. Maybe because of it ?

***ReitiRight*** · 31-03-2018, 07:41 AM,

Im trying to install SDP an BLP Data again and give feedback again. Needs just a little time to unzip everything wink

I'm using 2017 ICOM Next.

***Stromag*** · (This post was last modified: 31-03-2018, 08:03 AM by Stromag.)

(30-03-2018, 21:03 PM)bmwadriatic Wrote:
(29-03-2018, 14:32 PM)ReitiRight Wrote: Is there any solution when the programming system (PSdZ) could not be initialised?

(At the first run I forgot to disable my firewall and the virus scanner scanned a file - but the virus scanner said everything is ok).

Have same message every time starting diagnostic on vehicle, SDP and BLP Data i did not install, because i have no ICOM, only DCAN and ENET. Maybe because of it ?

You have to edit the reg file.
Open your Reg file with the editor, in the lower text there are 2 values "true"
You must change these 2 values "true" to "false", save them, and execute the Reg file.
Then you can use Ista + without SDP / BLP files.

***ReitiRight*** · 31-03-2018, 11:00 AM,

(29-03-2018, 17:15 PM)Stromag Wrote:
(29-03-2018, 14:32 PM)ReitiRight Wrote: Is there any solution when the programming system (PSdZ) could not be initialised?

(At the first run I forgot to disable my firewall and the virus scanner scanned a file - but the virus scanner said everything is ok).

Do you have SDP data installed and registered in the Reg?

I unzipped the "SDP 4.10.21" folder to "E:\BMW\Rheingold" - did the RCleaner and after rebooting the computer I executed the "ISTA-D Reg Fix x64" file.

Still doesn't work... same error message that the programming system couldn't be initialised. nospeak

Should I update my ICOM Next? My configuration is:

Current PACKAGE IMAGE version: 03.14.10
Current SYSTEM IMAGE version: 01.00.02
Current APPLICATION IMAGE version: 01.00.10

***Stromag*** · 31-03-2018, 11:29 AM,

(31-03-2018, 11:00 AM)ReitiRight Wrote:
(29-03-2018, 17:15 PM)Stromag Wrote:
(29-03-2018, 14:32 PM)ReitiRight Wrote: Is there any solution when the programming system (PSdZ) could not be initialised?

(At the first run I forgot to disable my firewall and the virus scanner scanned a file - but the virus scanner said everything is ok).

Do you have SDP data installed and registered in the Reg?

I unzipped the "SDP 4.10.21" folder to "E:\BMW\Rheingold" - did the RCleaner and after rebooting the computer I executed the "ISTA-D Reg Fix x64" file.

Still doesn't work... same error message that the programming system couldn't be initialised.

Should I update my ICOM Next? My configuration is:

Current PACKAGE IMAGE version: 03.14.10
Current SYSTEM IMAGE version: 01.00.02
Current APPLICATION IMAGE version: 01.00.10

SDP: under drive: / Rheingold / PSdZ / data_swi
BLP: under drive: / Rheingold / PSdZ / data

In the Reg the 2 values "true" for SDP and BLP ..
In the Reg the 2 values "true" change to "false" for without SDP and BLP ...

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	ISTA 4.47.1x I-LEVEL+OVERVIEW	AutoExe3219	0	70	6 hours ago Last Post: AutoExe3219
	ista 4.46 Standalone	kiranabc	74	9,851	11 hours ago Last Post: kiranabc
	ISTA Standalone Licenserequest up to v4.37.4x	Sedoy	8,707	661,753	Yesterday, 14:22 PM Last Post: Sedoy
	ISTA+ 4.47.1x Install Files - MEGA	shawnsheridan	11	955	Yesterday, 04:47 AM Last Post: ctgy8923
	ISTA 4.46.xx problems and possible solution	Sedoy	96	11,267	23-04-2024, 20:48 PM Last Post: CATAHA
	[MEGA] ISTA 4.32 // ISTA-P 3.72 + ALL LOADER up to 6.6 // no license needed	hashtagmaster	61	18,308	21-04-2024, 22:17 PM Last Post: grizzle
	ISTA SQLiteDBs PL Polish 4.40.12 - 4.40.40	maksymw	3	971	21-04-2024, 12:02 PM Last Post: matigdy
	Update ISTA 4.39.20 SQLiteDBs Italian Language	diman64	10	991	20-04-2024, 11:20 AM Last Post: elettra19
	ISTA+ 4.45.3x Install Files - MEGA	shawnsheridan	10	2,274	18-04-2024, 07:33 AM Last Post: rocdeng
	v4.46.51_PSdZData - Full Version - Torrent	luntik	0	153	17-04-2024, 14:44 PM Last Post: luntik

Contact Us