Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. MicroPod 2

  2. Enigma Tool

  3. ECU CHIPS

  4. Smartauto CarPlay

  5. Ecu-Service



Post Reply 
Solved ✔ BMW E90 AFTER REPLACE NEW BATTERY CANNOT CRANKING
07-05-2018, 01:39 AM (This post was last modified: 07-05-2018 01:50 AM by Gmmdi911.)
Post: #11
RE: BMW E90 AFTER REPLACE NEW BATTERY CANNOT CRANKING
Bad IBS unplug it and start car . Nevermind I missed the immo code .Sometimes I get a code in the egs for ews and once cleared is fine but usually using bmw explorer when I do this so not certain if ista will reset this , perhaps someone else knows this...Lets us know how you fixed it ...

Visit this user's website Find all posts by this user
Quote this message in a reply
07-05-2018, 04:23 AM (This post was last modified: 07-05-2018 04:25 AM by rus-bmw.)
Post: #12
RE: BMW E90 AFTER REPLACE NEW BATTERY CANNOT CRANKING
smile1 It's not a problem. Make the synchronization of CAS-DME! And use normal diagnostic software.
Find all posts by this user
Quote this message in a reply
07-05-2018, 14:11 PM
Post: #13
RE: BMW E90 AFTER REPLACE NEW BATTERY CANNOT CRANKING
The same tool you used to diagnostic, you can go inside the Cas or DME ECU, look for special functions to make synchronization of CAS-DME, once is done the car will start it. Good luck
Find all posts by this user
Quote this message in a reply
13-05-2018, 16:39 PM
Post: #14
RE: BMW E90 AFTER REPLACE NEW BATTERY CANNOT CRANKING
yes the car is work now
Find all posts by this user
Quote this message in a reply
16-05-2018, 07:37 AM
Post: #15
XZBMW RE: BMW E90 AFTER REPLACE NEW BATTERY CANNOT CRANKING
(13-05-2018 16:39 PM)chong5195 Wrote:  yes the car is work now

And what was the problem and solution?
Find all posts by this user
Quote this message in a reply
22-05-2018, 18:58 PM
Post: #16
RE: BMW E90 AFTER REPLACE NEW BATTERY CANNOT CRANKING
(16-05-2018 07:37 AM)atomantmk Wrote:  
(13-05-2018 16:39 PM)chong5195 Wrote:  yes the car is work now

And what was the problem and solution?

start adjustment in dme
Find all posts by this user
Quote this message in a reply
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Mazda cx9 replace pcm in chong5195 3 319 04-02-2018 20:34 PM
Last Post: fraserauto
  The car battery in fredb 0 438 30-06-2015 11:50 AM
Last Post: fredb
  Commodore VE /Pontiac G8 transmitter battery replacement in Psbauto1 0 348 02-06-2015 03:26 AM
Last Post: Psbauto1

Forum Jump:


User(s) browsing this thread:
1 Guest(s)

Return to TopReturn to Content