Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VAS6154 wih ODIS 4.3.3 problem
21-03-2018, 23:52 PM,
(This post was last modified: 22-03-2018, 00:04 AM by flashgorden2010.)
Post: #1
|
|||
|
|||
VAS6154 wih ODIS 4.3.3 problem
help please!
how do I get the VAS6154 running in ODIS 4.3.3? Wi-Fi is active and the connection works. Passthru works in ODIS. Only the ignition status can not be read. But would rather use the VAS driver in the ODIS! It had worked with the ODIS 4.2.3 !!! In the folder "Softing" there is only the 1.20.42 D-PDU. Win7 64bit (also run VCDS and Ediabas driver) the downgrade to 4.2.3 is fail. ODIS runs. but only Passthru..... Unfortunately, no data had been saved before the update. THX for help |
|||
22-03-2018, 01:16 AM,
Post: #2
|
|||
|
|||
RE: VAS6154 wih ODIS 4.3.3 problem
Are you sure it's not a fake interface?
Where did you got it? |
|||
22-03-2018, 01:21 AM,
(This post was last modified: 22-03-2018, 01:23 AM by flashgorden2010.)
Post: #3
|
|||
|
|||
RE: VAS6154 wih ODIS 4.3.3 problem
|
|||
22-03-2018, 01:37 AM,
Post: #4
|
|||
|
|||
RE: VAS6154 wih ODIS 4.3.3 problem
(22-03-2018, 01:21 AM)flashgorden2010 Wrote: Ohh.. no, i am sure! Thats is a face interface!! Please check this thread because I still believe that you have a clone https://cartechnology.co.uk/showthread.php?tid=26737 |
|||
22-03-2018, 08:39 AM,
(This post was last modified: 22-03-2018, 08:40 AM by Renopower.)
Post: #5
|
|||
|
|||
RE: VAS6154 wih ODIS 4.3.3 problem
This is defenitly clone
Use this 1.20.41 D-PDU. You can find it here on the forum |
|||
22-03-2018, 11:40 AM,
(This post was last modified: 22-03-2018, 11:51 AM by flashgorden2010.)
Post: #6
|
|||
|
|||
RE: VAS6154 wih ODIS 4.3.3 problem
(22-03-2018, 08:39 AM)Renopower Wrote: This is defenitly clone Hey, the VCI Manager has install the 1.20.40. You can see it in picture 5. But i dont find this folder on pc. Ok. I replace the folder 1.20.42 with 1.20.41 D-PDU and test it! When i make a new istall of 4.3.3, must i choose 5054 or 6154?? THX |
|||
22-03-2018, 16:33 PM,
Post: #7
|
|||
|
|||
RE: VAS6154 wih ODIS 4.3.3 problem
(22-03-2018, 11:40 AM)flashgorden2010 Wrote:Vas5054a but even and to select something other you can change then inside of Odis by the 'Extras>Diagnostic Interface' button anytime........(22-03-2018, 08:39 AM)Renopower Wrote: This is defenitly clone Regarts..... |
|||
23-08-2018, 06:56 AM,
Post: #8
|
|||
|
|||
RE: VAS6154 wih ODIS 4.3.3 problem
|
|||
23-08-2018, 09:20 AM,
Post: #9
|
|||
|
|||
RE: VAS6154 wih ODIS 4.3.3 problem
(23-08-2018, 06:56 AM)rivotahina Wrote: Hi, Where Can I find this 1.20.41 D-PDU here? Thanks here you are |