[ruben_17non]

i am struggling to find the PN for the holder of the Park Assist sensor like THIS ONE. It is slightly inner curved and it is different in comparison with the normal PDC holder.

I doubt that it comes only with bumper.

In realoem i did not find it neither for my chasis F25 or F30 and few others.

Any help would be really appreciated.

thanks

unnafortunate bmw not sell holder of PMA

hi danyro

i am planning to do the retrofit for the 5DP on my F25
i buy the PMA from the net and i will buy the 2 sensors from the market localy
please if you can share the pin configuration from PDC to PMA

thanks in advance

check with istad or google newtis for find SSP.
if i remember, PDC sensor is same wiring, you only need wire new PMA sensors to PMA module.

[sacaman]

i will try and return to you back

i will switch modules and VO code the 5DP

and report back

[danyro]

the easy part is to buy the PMA module and the PMA sensors.
the PMA holders from the bumper is the hardest part - i invested a lot in finding the PMA holders for sensors but without success. I dont know if the holders are coming only with a new bumper fitted for $5DP
I ordered a PDC repair kit for 4'er but the holders are not the same as they are on a factory fitted F25.

Yesterday i received the holders for a skoda superb and it seems they are ok - with small adaptations.

i did not manage to find the PMA holders even I called the 2 BMW dealers.

are you using a new bumper with 5DP or are you going to drill the holes?

[sacaman]

Hi

i will drill the holes , I am locking for the holders to and thanks for the hint to use Skoda one the WAG dealers are more flexible then the BMW one
for the pins they are different from the PDC it’s not plug and play

I will finalize the correspondence table and I will share it :


Thanks for your advice and don’t hesitate to correct me

[danyro]

PN for skoda sensors: 3t0919487a
sockets/pins/grommets for the PMA sensors which are ok: 61132359997

NOT ok PMA holders from PDC repair kit: 51118065982

if you need electrical schemes, you can start from here like me: https://www.newtis.info/tisv2/a/en/f25-x...1VnXlgasdG

[danyro]

i have all the parts received but i did not have the time for this.

i hope to do it next weekend.

keep you posted.

[sacaman]

i am waiting for the sensor's and the holders

i will update you once i will start

Thanks

[danyro]

bad news - skoda holders are a bit large (~+0,2mm) than the sensor with the rubber.
I struggled 2h to adapt it but no chances.

therefore, as I spent already too much time in finding the proper holder, i will use the one from the PDC repair kit - like the 2 ones from here - http://i180.photobucket.com/albums/x189/...0Parts.jpg

[sacaman]

bad news

i request them ( payed them) from the SKODA dealer

i will try to call him tomorrow to cancel the order as he say that it will take sometimes to be here

this one you can get them from the BMW dealer ?

thanks for your sharing

sacaman

[danyro]

Managed to get 5DP working. it was a lot of effort, mainly on bumper mounting/dismounting (in 1 person) and getting the 2 cables from the sensors via car firewall.
I lost a lot of time on these 2 main issues. the rest, is piece of cake.

some pictures with the firewall grommet are here. this grommet is under glovebox and behind of the JBBF module(i think it is jbbf).
https://imgur.com/a/uK3WlgQ

that repair PDC kit was bought from ebay but it can be bought from BMW dealer with above PN.

as a conclusion - it is working fine in its limits, but I think i would not do this again alone