[BroekNL]

Hello,

I've got a problem with my BMW E60 530D 2006.
After installing a used LM2 AHL module from an E65 wrote the VIN and FLASHED it with WinkFP ISTA-P does not respond anymore and says SGM/ZGM not responding. Is this because of the I-level difference how can I solve this problem correctly?

Many thanks

[beemered]

- copy VO from CAS to LM2
- code LM2
- copy I-Level from CAS to LM2
- take VIN from car and program

[BroekNL]

Thanks alot.
And the I-level copy from the cas can be done with Tool32? Do you know exactly how it has to be done?

[beemered]

With Tool32:
First "i_stufe_lesen" in E60.prg
Then "i_stufe_schreiben" in LM_AHL_2.prg
In argument, like this format for example:
E060-08-03-501;E060-15-07-501;E060-15-07-501

[BroekNL]

Allright, but when I open the module LM_AHL.prg in Tool32 I can’t find the job istufe_schreiben or
lesen.
When I read out the istufe from the CAS the istufe = empty that might be a problem too?

[inspi1981]

Did You read post from beemered?
You must open E60.prg

[BroekNL]

I did read the post. Found the istufe from E60.prg but I can't write istufe to the LMA (LM_AHL.prg) only in the CAS module (CAS.prg)
I'm not familiair with the Tool32 program so don't know exactly yet how all the functions work and where I got to change or find something.

[Fx82]

Do yourself a favor and sent the unit to someone in your country.

[inspi1981]

OK, again.
You MUST WRITE Istufe WITH E60.prg

[Stian.k]

With Tool32:
First "i_stufe_lesen" in E60.prg
Then "i_stufe_schreiben" in LM_AHL_2.prg
In argument, like this format for example:
E060-08-03-501;E060-15-07-501;E060-15-07-501

I have same issue and LM_AHL2.PRG doesn't have the i_stufe commands   so I'm stuck there

Write istufe with e60.prg like inspi1981 is saying doesn't make sense to me since e60.prg has the right I level