Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

4F0910279 sgo file needed please
02-04-2018, 15:48 PM,
Post: #1
ZTAudi  4F0910279 sgo file needed please
Hi, everyone. Hope someone can help me.

I need flash file for J519 Central electrics module. 4F0910279J. My current FW is 4F0910279J 0250 is there any later version for that module? Or can it be updated with different flash file? I need to update it for Face Lift DRL support.

I've downloaded 50GB of flash files data. And only ones I can find are 4F0910279_S0190 or 4F0910279_S240.

Any help or advise would be appreciated.

Thanks in advance.
Quote this message in a reply
02-04-2018, 19:20 PM, (This post was last modified: 02-04-2018, 19:26 PM by sixcode.)
Post: #2
RE: 4F0910279 sgo file needed please
4F0910279_S240 is your file nothing newer

Don't PM me for SW keys, FRM, Licences, radio codes or similar, you will not get any answer...
Quote this message in a reply
02-04-2018, 19:36 PM, (This post was last modified: 02-04-2018, 19:40 PM by Puntt.)
Post: #3
RE: 4F0910279 sgo file needed please
(02-04-2018, 19:20 PM)sixcode Wrote:  4F0910279_S240 is your file nothing newer

So I will have to replace my module with one from FL car? I've seen on eBay modules with 032, 034 versions.

Understood.

Thanks for your help.
Quote this message in a reply
02-04-2018, 19:55 PM,
Post: #4
RE: 4F0910279 sgo file needed please
(02-04-2018, 19:36 PM)Puntt Wrote:  
(02-04-2018, 19:20 PM)sixcode Wrote:  4F0910279_S240 is your file nothing newer

So I will have to replace my module with one from FL car? I've seen on eBay modules with 032, 034 versions.

Understood.

Thanks for your help.

maybe hardware is different.. who can say.. for your module is 0240

Don't PM me for SW keys, FRM, Licences, radio codes or similar, you will not get any answer...
Quote this message in a reply
02-04-2018, 23:53 PM, (This post was last modified: 03-04-2018, 00:02 AM by PopDog.)
Post: #5
4F0910279 sgo file needed please
If you have Module Version 250 it is possible to use FL DRL. You only have to change coding. DRL Possible from Version 240+

Also you have to cut some cables and bring them together different.

If my answer helped to fix anything, then don't forget to give me some rep please! 
Quote this message in a reply
03-04-2018, 10:19 AM, (This post was last modified: 03-04-2018, 10:33 AM by Puntt.)
Post: #6
RE: 4F0910279 sgo file needed please
(02-04-2018, 23:53 PM)PopDog Wrote:  If you have Module Version 250 it is possible to use FL DRL. You only have to change coding. DRL Possible from Version 240+

Also you have to cut some cables and bring them together different.

Thanks for the tip. But I know that already. DRL works but, additional Main Beam doesn't. With my current module, I have two spare wires left from Main Beam. And that makes me nuts. Only option is either to update J519 to later version. Or to replace complete module from FL Car.

I was thinking that maybe there is later file for these modules somewhere around on internet, but couldn't find one. Only 190 and 240.
Quote this message in a reply
03-04-2018, 14:59 PM, (This post was last modified: 03-04-2018, 15:29 PM by PopDog.)
Post: #7
RE: 4F0910279 sgo file needed please
you mean the two unused lights in the inner side next to the xenons which can be used as additional lights to high beam ? You know what ?

In my car I have retrofitted DRL FL Lights with CEL SW:4F0-910-279-AF HW:4F0-907-279 --- Central Electrics: ILM Fahrer H32 Version 0400, Coding :0015222

Also the additional high beams not working, also there is no error.

You can try your luck with a new one, but it will and can not work. dimming is also not working on newest version (maybe removed because of many broken lamps)

Problem is, that when i look in the internet for the manual to apply the cables, i always get the manual (rs6 style) so RS6 have fog lamps on this place.

---------------

You have to put cables different together for additional high beam lights, but you have to sit down and look for cabling in electronics plan before facelift and cabling after facelift and write on paper the difference. i will do this for you for the additional high beam light ...

So on 2009 Facelift Version the additional Lamp on Left Side is called M67 Additional High Beam Light. On Lamp Side it is Pin 8 on CEL ECU Side it is (T10/Pin 8) ...

On right side it is M68 Additional High beam Light. On Lamp Side it is again PIN 8 and on CEL ECU Side it is (T10/Pin 2)

So you have to look before Facelift what was on Pin 8 at both Lamp Sides and here is the problem. before facelift there is no cable on Pin 8 going somewhere in the electronics plan also there should be no cable attached..

So you have to put 2 cables with pins from the lamps Pin 8 over the motor area inside to the CEL ECU and attach them to T10/Pin8 for left side and T10 Pin 2 for right side. You still want them to work ?

If my answer helped to fix anything, then don't forget to give me some rep please! 
Quote this message in a reply
03-04-2018, 15:29 PM, (This post was last modified: 03-04-2018, 15:46 PM by Puntt.)
Post: #8
RE: 4F0910279 sgo file needed please
(03-04-2018, 14:59 PM)PopDog Wrote:  you mean the two unused lights in the inner side next to the xenons which can be used as additional lights to high beam ? You know what ?

In my car I have retrofitted DRL FL Lights with CEL SW:4F0-910-279-AF HW:4F0-907-279 --- Central Electrics: ILM Fahrer H32 Version 0400, Coding :0015222

Also the additional high beams not working, also there is no error. I checked the electronics plan, but I can not find these lamps. In the plan they are called as fog lights in the headlights.

You can try your luck with a new one, but without cable change it will not work. also my lights are not dimming.

I was using ELSA to wire them up. On pre FL Cars there is no additional High Beams. On FL cars there is additional High Beams. M68 for right side and M67 for left side. Your module should support them. ( I think these are working only when you use flash function, not sure)

Change your coding to 0013222. And see what happens. Your car is FL or pre FL as wiring is a bit different. I can attach wiring from ELSA for FL cars if someone needs them.

On FL cars wiring is as follows:
Right Side
T14b Pin12 -->Pin14(J519 T32C) Side light
T14b Pin10 -->Pin1 (J519 T10A) DRL
T14b Pin 8 -->Pin2(J519 T10A) M68 High Beams

Left Side
T14a Pin12 -->Pin3(J519 T32C)
T14a Pin10 -->Pin6(J519 T10A)
T14a Pin 8 -->Pin8)J519 T10A)

On Pre FL Cars it is as follows:
Right Side
T14b Pin10 --> Pin15(J519 t32c) side light
T14b Pin12 --> Pin1(J519 t10a) DRL
T14b Pin8 disconeccted

Left Side
T14a Pin10 -->Pin4(J519 t32c) Side Light
T14a Pin12 -->Pin6(J519 t10a) DRL
T14a Pin8 disconeccted

If you have shorted wires on J519
T10a Pin 8 --> Pin4 T32c
T10a Pin 2 --> Pin15 T32c

It means that you have wired them as Headlights From Audi RS6. As they are a bit different. I've been looking wiring diagrams of these also.

All wiring is done. Total 12new wires for headlights and additional 6 wires for range senrors and another 4 wires for j431. In total 22new wires smile I was doing pre FL Halogen to FL Bi-Xenon DRL conversion.
Quote this message in a reply
04-04-2018, 00:32 AM, (This post was last modified: 04-04-2018, 10:50 AM by PopDog.)
Post: #9
RE: 4F0910279 sgo file needed please
Are you from germany ? when yes contact me, i have a friend who works at audi, he upgraded mine over software-station.
but he can not give sgo otherwhise he will get fired. Maybe i can help you then.

If my answer helped to fix anything, then don't forget to give me some rep please! 
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Anyone can generate a VIN file for PETKA? jfim88 47 1,784 Yesterday, 13:26 PM
Last Post: turzol
  How to identify flash file name for each steering assist anass_f 2 39 Yesterday, 13:24 PM
Last Post: anass_f
  5NA920791C SW 4191 flash needed david99 6 635 27-03-2024, 21:40 PM
Last Post: zvonexp
ZTAudi Need help flash file TCU Manoj448 1 67 24-03-2024, 08:26 AM
Last Post: pupu144
  DSG file for 0AM325025D ZHL VW Touran TDI rehatflogs 1 81 12-03-2024, 12:10 PM
Last Post: jaxone
ZVW Need Flash File AID 3G0920791 wojoo 17 522 11-03-2024, 09:06 AM
Last Post: spooky75
ZVW Odis file search TomSab 2 179 05-03-2024, 05:57 AM
Last Post: TomSab
  Flash file and dataset 3Q0907566G/590G? slimshouki 0 59 02-03-2024, 21:38 PM
Last Post: slimshouki
ZVW Touareg 2 flash file ACC needed 7P6907561C liviu2004 0 83 24-02-2024, 17:02 PM
Last Post: liviu2004
  2016 lamborghini huracan 4wd control module programming help needed deutsch 2 165 17-02-2024, 19:09 PM
Last Post: Automotive 1

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content