Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Which tool to read/write EDC16CP39 on Peugeot 407 2.2 HDI
03-04-2018, 11:58 AM,
Post: #1
|
|||
|
|||
Which tool to read/write EDC16CP39 on Peugeot 407 2.2 HDI
As per title, really. I am looking for a tool to read and write from/to ECU EDC16CP39 o my Peugeot 407 2.2 HDI via ODB port. I have an old Galletto 1260 that worked fine with the 406 (EDC15) but doubt it will work with this!
Would FGTech Galletto 4 be OK or would Kess be better? Thanks CJ |
|||
03-04-2018, 12:07 PM,
Post: #2
|
|||
|
|||
RE: Which tool to read/write EDC16CP39 on Peugeot 407 2.2 HDI
for edc16 enough mpps
|
|||
03-04-2018, 12:40 PM,
Post: #3
|
|||
|
|||
RE: Which tool to read/write EDC16CP39 on Peugeot 407 2.2 HDI
Any particular version? There seems to be a few. I heard this ECU on this particular car was tricky to read but no real details.
|
|||
03-04-2018, 17:03 PM,
Post: #4
|
|||
|
|||
RE: Which tool to read/write EDC16CP39 on Peugeot 407 2.2 HDI
The MPPS not worked with EDC16CP39. I use GALLETTO 4 V54 0475, write and read is OK.
|
|||
11-04-2018, 15:56 PM,
(This post was last modified: 11-04-2018, 15:57 PM by jozoku1.)
Post: #5
|
|||
|
|||
RE: Which tool to read/write EDC16CP39 on Peugeot 407 2.2 HDI
Fgtech v54 works fine.
Just read. Be careful with eco mode. ECU dies if the car falls into eco mode. ( battery voltage drops under 12.1 V) BR |
|||
12-04-2018, 11:28 AM,
Post: #6
|
|||
|
|||
RE: Which tool to read/write EDC16CP39 on Peugeot 407 2.2 HDI
I would suggest Ktag on the bench and do full backup first.
|
|||
19-09-2019, 08:52 AM,
Post: #7
|
|||
|
|||
RE: Which tool to read/write EDC16CP39 on Peugeot 407 2.2 HDI
Kess do it with 134 family.
|
|||
21-10-2019, 20:07 PM,
Post: #8
|
|||
|
|||
RE: Which tool to read/write EDC16CP39 on Peugeot 407 2.2 HDI
hi , it is correct - Kess do it with 134 family
but it is on mitsubishi outlander II / psa I was try it and its working |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content