Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ G-series - Coding Automatic Lane Change SPURWECHSELASSISTENT
07-04-2018, 17:31 PM, (This post was last modified: 14-04-2018, 20:43 PM by fantomel.)
Post: #1
XZBMW  G-series - Coding Automatic Lane Change SPURWECHSELASSISTENT
Hello There,

Looking for help in coding Change Lane Assist, which is currently disabled by legislation on my G01 X3. In German this is called SPURWECHSELASSISTENT.

My car has Driving Assistance Plus package (5AT), so it has capable hardware.

Have already found the setting SPURWECHSELASSISTENT under HU_NBT_EVO which I activated.
However, there needs to be one also on the BDC_01 ECU, but unfortunately cannot find it, because some of them are still trimmed.
Code:
http://www.bimmerfest.com/forums/showpost.php?p=12447066&postcount=8

Can someone help to find out which setting needs to be changed on BDC_01?

Thanks!
08-04-2018, 05:57 AM,
Post: #2
RE: G-series - Coding Automatic Lane Change SPURWECHSELASSISTENT
If it is disabled, chance is there is a dedicated entry for this in your VO.
If so, you should remove this and then VO code the appropriate modules.

Can you post your VIN?
08-04-2018, 15:52 PM,
Post: #3
RE: G-series - Coding Automatic Lane Change SPURWECHSELASSISTENT
(08-04-2018, 05:57 AM)KapiteinIglo Wrote:  If it is disabled, chance is there is a dedicated entry for this in your VO.
If so, you should remove this and then VO code the appropriate modules.

Can you post your VIN?

I tried this, but I see no dedicated VO that seems to be removing this functionality.

LB60213
08-04-2018, 19:57 PM, (This post was last modified: 08-04-2018, 20:00 PM by Almaretto.)
Post: #4
RE: G-series - Coding Automatic Lane Change SPURWECHSELASSISTENT
(07-04-2018, 17:31 PM)simpaty Wrote:  Hello There,

Looking for help in coding Change Lane Assist, which is currently disabled by legislation on my G01 X3. In German this is called SPURWECHSELASSISTENT.

My car has Driving Assistance Plus package (5AT), so it has capable hardware.

Have already found the setting SPURWECHSELASSISTENT under HU_NBT_EVO which I activated.
However, there needs to be one also on the BDC_01 ECU, but unfortunately cannot find it, because some of them are still trimmed.

http://www.bimmerfest.com/forums/showpos...ostcount=8

Can someone help to find out which setting needs to be changed on BDC_01?

Thanks!

Highlighted FDL is the following:

3420 PfSarahMaster, 14

STRECKEN_VERLAUF

Comment = Geschwindigkeitsanpassung aufgrund Streckenverlauf verbaut oder nicht

OPTIONS
nicht_aktiv (not active) = 00
aktiv (Active) = 01

EDIT: If you check Xpath, it is nicht_aktiv in all chassis.


Reputation: +1 - simpaty [+1]
[+] 2 users say Thank You to Almaretto for this post
08-04-2018, 20:06 PM, (This post was last modified: 08-04-2018, 20:07 PM by simpaty.)
Post: #5
RE: G-series - Coding Automatic Lane Change SPURWECHSELASSISTENT
How did you finf this out? Im running last launcher pro, last esys and last pszdata...
Someone that has this function activated on g series, please share your CAFD with me! Thanks
09-04-2018, 12:25 PM,
Post: #6
RE: G-series - Coding Automatic Lane Change SPURWECHSELASSISTENT
I would take the NCD files from BDC and NBT_EVO. Use the NcdCafdTool to see if there is any impact from 851 or 879. You never know.
Maybe also check impact for SWW/SWW2 modules?
12-04-2018, 10:54 AM,
Post: #7
RE: G-series - Coding Automatic Lane Change SPURWECHSELASSISTENT
there is no impact of these 2 codes that look like change lane assist.
However, this is the impactof 5At on my modules, trying to locate which one looks like the incriminated one which blocks Lane Change Assistant.

<<< CAFD_000017BC.caf.103_041_034 (BDC_01) >>>
BDC_01 > . 3141 > 3141_0_0_255 = UNK_PARAM_11 [Default]
BDC_01 > . 3142 > 3142_0_0_255 = UNK_PARAM_1
BDC_01 > . 3142 > 3142_2_2_4 = aktiv
BDC_01 > . 3142 > 3142_2_2_64 = aktiv
BDC_01 > . 3143 > 3143_2_2_1 = aktiv
BDC_01 > ComAdapterNetworkDtc 3003 > ComAdapterPdu_0CD_Kamera_Frontraumueberwachung_2 = aktiv
BDC_01 > ComAdapterNetworkDtc 3003 > ComAdapterPdu_13D_Radar_Frontraumueberwachung = aktiv
BDC_01 > ComAdapterNetworkDtc 3003 > ComAdapterPdu_198_Kamera_Frontraumueberwachung = aktiv
BDC_01 > ComAdapterNetworkDtc 3003 > ComAdapterPdu_19E_Steuerung_Vibration_Lenkrad_Anzeige_Aussenspiegel_2015 = aktiv
BDC_01 > ComAdapterNetworkDtc 3003 > ComAdapterPdu_1C0_Status_Anzeige_Fahrerassistenzsystem = aktiv
BDC_01 > ComAdapterNetworkDtc 3003 > ComAdapterPdu_1FC_Soll_Anzeige_Vibration_Warnung_Fahrspurwechsel = aktiv
BDC_01 > ComAdapterNetworkDtc 3003 > ComAdapterPdu_23F_Soll_Haptik_Warnung_Fahrspurverlassen = aktiv
BDC_01 > ComAdapterNetworkDtc 3003 > ComAdapterPdu_240_Soll_Haptik_Warnung_Querfuehrungsassistenz = aktiv
BDC_01 > ComAdapterNetworkDtc 3003 > ComAdapterPdu_31C_Anzeige_Fahrerassistenzsystem = aktiv
BDC_01 > PfExternalMirrorMaster 3110 > PfExternalMirrorMaster_23_23_1 = aktiv
BDC_01 > PfExternalMirrorMaster 3110 > PfExternalMirrorMaster_23_23_2 = aktiv
BDC_01 > PfInternalMirror 3120 > PF_INMI_LIN_VAR = nicht_aktiv [Default]
BDC_01 > PfLinSteeringWheel 3140 > LIN_VARIANTE_SZL = szl_r_aic_4Band
BDC_01 > PfSarahMaster 3420 > AUFFAHR_WARNUNG = ccm
BDC_01 > PfSarahMaster 3420 > GEZIELTES_ANLEUCHTEN = nicht_aktiv [Default]
BDC_01 > PfSarahMaster 3420 > PERSONEN_WARNUNG_NACHT = aktiv
BDC_01 > PfSarahMaster 3420 > PfSarahMaster_2_2_24 = aktiv
BDC_01 > PfSarahMaster 3420 > PfSarahMaster_2_2_96 = nicht_aktiv [Default]
BDC_01 > PfSarahMaster 3420 > PfSarahMaster_3_3_12 = aktiv
BDC_01 > PfSarahMaster 3420 > PfSarahMaster_3_3_192 = aktiv
BDC_01 > PfSarahMaster 3420 > PfSarahMaster_3_3_48 = aktiv
BDC_01 > PfSarahMaster 3420 > SARAH_TASTER_VERBAUT = verbaut
BDC_01 > PfSarahMaster 3420 > SPURVERLASSENS_WARNUNG = aktiv
BDC_01 > PfSarahMaster 3420 > UNBELEGT = UNK_PARAM_0

<<< CAFD_00001DF8.caf.104_020_003 (BDC_01) >>>
BDC_01 > LaMaster2 3531 > LaMaster2_245_245_2 = nicht_aktiv [Default]

<<< CAFD_00002089.caf.009_000_084 (KAFAS) >>>
KAFAS > LDW_CODING 3003 > LDW_C_ETHERNET_OUTPUT_ENABLE = initwert
KAFAS > SLI_NPI_CODING 3005 > NPI_ENABLE = unknown [Default]
KAFAS > SLI_NPI_CODING 3005 > SLI_ENABLE = unknown [Default]
KAFAS > URBANSAFETY 3006 > URBANSAFETY_OBJ_ACTIVATION_STATUS = G11 [Default]
KAFAS > URBANSAFETY 3006 > URBANSAFETY_PED_ACTIVATION_STATUS = G11
KAFAS > URBANSAFETY 3006 > URBANSAFETY_STATIONARY_ACTIVATION_STATUS = G11 [Default]
KAFAS > URBANSAFETY 3006 > URBANSAFETY_VEH_ACTIVATION_STATUS = unknown [Default]
KAFAS > VFW 300C > VFW_AVAILABLE = initwert [Default]
KAFAS > WWA 300D > WWA_ENABLE = unknown [Default]

<<< CAFD_000029B7.caf.000_017_003 (DME_DDE8xx) >>>
DME_DDE8xx > BSU_BEREICH 3020 > Codierung_Selbsterkennung_Blk0_Bit_6_HC2 = Wert_1 [Default]
DME_DDE8xx > BSU_BEREICH 3020 > Codierung_Selbsterkennung_Blk1_Bit_4_KAFAS = Wert_1
DME_DDE8xx > BSU_BEREICH 3020 > Codierung_Selbsterkennung_Blk1_Bit_7_LP_CAN = Wert_1
DME_DDE8xx > BSU_BEREICH 3020 > Codierung_Selbsterkennung_Blk4_Bit_2_SAS = Wert_0 [Default]

<<< CAFD_00001C7A.caf.002_240_003 (SAS10) >>>
SAS10 > SAS_10 3000 > C_AWA_vorhanden = false [Default]
SAS10 > SAS_10 3000 > C_EDP_vorhanden = false [Default]
SAS10 > SAS_10 3000 > C_Fahrfunktion = ACC_Premium
SAS10 > SAS_10 3000 > C_iBrake_AGB_Funktion_enable = enable
SAS10 > SAS_10 3000 > C_iBrake_Akutwarnung_auf_Standziele_enable = true
SAS10 > SAS_10 3000 > C_iBrake_Akutwarnung_dynamisch_enable = true
SAS10 > SAS_10 3000 > C_iBrake_Anbremsen_auf_Standziele_enable = true
SAS10 > SAS_10 3000 > C_iBrake_Anbremsen_enable = true
SAS10 > SAS_10 3000 > C_iBrake_Anbremsen_iBrake5_enable = enable
SAS10 > SAS_10 3000 > C_iBrake_Anpassung_Maximalverzoegerung_DBC_enable = true
SAS10 > SAS_10 3000 > C_iBrake_BVK_bei_Warnung_enable = true
SAS10 > SAS_10 3000 > C_iBrake_DBC_Umparametrierung_enable = true
SAS10 > SAS_10 3000 > C_iBrake_Vorbefuellung_enable = true
SAS10 > SAS_10 3000 > C_iBrake_Vorwarnung_auf_Standziele_enable = true
SAS10 > SAS_10 3000 > C_iBrake_Vorwarnung_dynamisch_enable = true
SAS10 > SAS_10 3000 > C_iBrake_Vorwarnung_statisch_enable = true
SAS10 > SAS_10 3000 > C_ISA_vorhanden = false [Default]
SAS10 > SAS_10 3000 > C_LCA_rSKW_Vorhanden = true
SAS10 > SAS_10 3000 > C_LCA_SKW_Vorhanden = true
SAS10 > SAS_10 3000 > C_LCA_SVW_Vorhanden = true
SAS10 > SAS_10 3000 > C_LCA_SWW_Vorhanden = true
SAS10 > SAS_10 3000 > C_LCA_vorhanden = true
SAS10 > SAS_10 3000 > C_QVA_Warnung_enable = true
SAS10 > SAS_10 3000 > C_STA_ALC_Vorhanden = true
SAS10 > SAS_10 3000 > C_Variante_Frontsensorik = Radar_Fusion
SAS10 > Umfeldmodell 3001 > C_Segeln_Beruecksichtigung_SLI = true
SAS10 > Umfeldmodell 3001 > C_Variante_Kombi = Mid
SAS10 > Umfeldmodell 3001 > C_vSLI_FUNKTION = false [Default]

<<< CAFD_00002060.caf.006_004_031 (DSC_EBC460) >>>
DSC_EBC460 > Allgemein 3000 > C_Funktion_AdaptiverBremsassistent_aktiv_l = aktiv
DSC_EBC460 > Allgemein 3000 > C_Funktion_AktiveGefahrenbremsung_aktiv_l = aktiv
DSC_EBC460 > Allgemein 3000 > C_Funktion_PBA_Vorbefuellung_aktiv_l = aktiv
DSC_EBC460 > Allgemein 3000 > C_Funktion_Ueberwachung_3DS_aktiv_l = aktiv
DSC_EBC460 > Allgemein 3000 > C_Funktion_Zielbremsung_aktiv_l = aktiv
DSC_EBC460 > BMW-BB-FAS 3021 > C_ACC_vorhanden = vorhanden
DSC_EBC460 > BMW-BB-FAS 3021 > C_AWA_Funktion = vorhanden
DSC_EBC460 > BMW-BB-FAS 3021 > C_CTA_Variante = CTA_hinten_und_vorne
DSC_EBC460 > BMW-BB-FAS 3021 > C_CTA_vorhanden = vorhanden
DSC_EBC460 > BMW-BB-FAS 3021 > C_EDP_vorhanden = nicht_vorhanden [Default]
DSC_EBC460 > BMW-BB-FAS 3021 > C_Fahrfunktion = aus [Default]
DSC_EBC460 > BMW-BB-FAS 3021 > C_FCW_CCM_Funktion = false [Default]
DSC_EBC460 > BMW-BB-FAS 3021 > C_Frontschutz_AGB_enable = enable
DSC_EBC460 > BMW-BB-FAS 3021 > C_Frontschutz_Generatoransteuerung_enable = enable
DSC_EBC460 > BMW-BB-FAS 3021 > C_Frontschutz_Koordination_Anbremsen_enable = enable
DSC_EBC460 > BMW-BB-FAS 3021 > C_Frontschutz_Koordination_DBC_Umparametrierung_enable = enable
DSC_EBC460 > BMW-BB-FAS 3021 > C_Frontschutz_Koordination_Vorbefuellung_enable = enable
DSC_EBC460 > BMW-BB-FAS 3021 > C_Frontschutz_Koordination_Warnung_enable = enable
DSC_EBC460 > BMW-BB-FAS 3021 > C_HC2_Vorhanden = vorhanden
DSC_EBC460 > BMW-BB-FAS 3021 > C_HDC_vorhanden = false [Default]
DSC_EBC460 > BMW-BB-FAS 3021 > C_iBrake_Funktion = TRUE
DSC_EBC460 > BMW-BB-FAS 3021 > C_Infospeicher_AS_enable = enable
DSC_EBC460 > BMW-BB-FAS 3021 > C_NVC_aktiv_l = false [Default]
DSC_EBC460 > BMW-BB-FAS 3021 > C_pFGS_Funktion = true
DSC_EBC460 > BMW-BB-FAS 3021 > C_QVA_Funktion = TRUE
DSC_EBC460 > BMW-BB-FAS 3021 > C_Segeln_Beruecksichtigung_SLI = aktiv
DSC_EBC460 > BMW-BB-FAS 3021 > C_SLD_Funktion = aus [Default]
DSC_EBC460 > BMW-BB-FAS 3021 > C_TLC_Vorhanden = vorhanden
DSC_EBC460 > BMW-BB-FAS 3021 > C_Variante_Kombi = Mid
DSC_EBC460 > BMW-BB-FAS 3021 > C_VerzRgl_aktiv = Datensatz_1
DSC_EBC460 > BMW-BB-FAS 3021 > C_VFA_Funktion = FALSE [Default]
DSC_EBC460 > BMW-BB-FAS 3021 > C_vSLI_Funktion = nicht_aktiv [Default]
DSC_EBC460 > BMW-BB-FAS 3021 > C_VZA_Funktion = false [Default]
DSC_EBC460 > BMW-BB-FAS 3021 > FasCebcEnable = disable [Default]
DSC_EBC460 > BMW-BB-FAS 3021 > FasCfoEnable = disable [Default]
DSC_EBC460 > BMW-BB-FAS 3021 > FasDacgEnable = disable [Default]
DSC_EBC460 > BMW-BB-FAS 3021 > FasDspEnable = disable [Default]
DSC_EBC460 > BMW-BB-FAS 3021 > FasLcgEnable = disable [Default]
DSC_EBC460 > BMW-BB-FAS 3021 > FasQcfoEnable = disable [Default]
DSC_EBC460 > BMW-BB-FAS 3021 > FasScgEnable = disable [Default]
DSC_EBC460 > BMW-BB-INT 3022 > IntComHdlDccAct = deaktiv [Default]
DSC_EBC460 > BMW-BB-INT 3022 > IntFestusAktiv = Aus [Default]
DSC_EBC460 > BNKonfigSW 3003 > C_BNKonfigSW_Receive_BRRK_RQ_WMOM_PT_SUM_TAR_LIM_DRS_aktiv_l = aktiv
DSC_EBC460 > BNKonfigSW 3003 > C_BNKonfigSW_Receive_RADA_HDWOBS_2_aktiv_l = aktiv
DSC_EBC460 > BNKonfigSW 3003 > C_BNKonfigSW_Receive_RQ_FAS_CF_aktiv_l = aktiv
DSC_EBC460 > BNKonfigSW 3003 > C_BNKonfigSW_Receive_SPEC_PRMSN_DRS_SP2015_RQ_BRTORQ_DRS_SP2015_aktiv_l = aktiv
DSC_EBC460 > BNKonfigSW 3003 > C_BNKonfigSW_Receive_TAR_DVE_aktiv_l = aktiv
DSC_EBC460 > BNKonfigSW 3003 > C_BNKonfigSW_Receive_TAR_FBK_WARN_LGA_aktiv_l = aktiv
DSC_EBC460 > BNKonfigSW 3003 > C_BNKonfigSW_Send_COND_HDWOBS_aktiv_l = nicht_aktiv
DSC_EBC460 > BNKonfigSW 3003 > C_BNKonfigSW_Send_DISP_DRASY_aktiv_l = nicht_aktiv
DSC_EBC460 > BNKonfigSW 3003 > C_BNKonfigSW_Send_DISP_DRASY_LNG_aktiv_l = nicht_aktiv
DSC_EBC460 > BNKonfigSW 3003 > C_BNKonfigSW_Send_DISP_FRSG_aktiv_l = nicht_aktiv
DSC_EBC460 > BNKonfigSW 3003 > C_BNKonfigSW_Send_RQ_WMOM_PT_SUM_TAR_LIM_DRS_aktiv_l = nicht_aktiv
DSC_EBC460 > Debug 3008 > C_Debug_InhaltDebugframeBB_e = aus [Default]
DSC_EBC460 > Teillisten 3012 > C_Teilliste_Trockenbremsen_c = wert_01

<<< CAFD_00001B2C.caf.002_010_012 (ACSM_5) >>>
ACSM_5 > PcActInterface 3201 > cpActCtrlTabPcs2Act1 = aktiv
ACSM_5 > PcActInterface 3201 > cpActCtrlTabPcs2Act2 = aktiv
ACSM_5 > PcComfortFct 3203 > cpGleTr1LEnb = aktiv
ACSM_5 > PcComfortFct 3203 > cpGleTr1REnb = aktiv
ACSM_5 > PcVehiclePar 3207 > cpVehBltTr1LEquip = aktiv
ACSM_5 > PcVehiclePar 3207 > cpVehBltTr1REquip = aktiv
ACSM_5 > PcVehiclePar 3207 > cpVehRearRadarEquip = aktiv

<<< CAFD_00001B2D.caf.002_011_120 (ACSM_5) >>>
ACSM_5 > PKM 3300 > cta = aktiv

<<< CAFD_00001EF6.caf.006_028_018 (HU_NBT_EVO) >>>
HU_NBT_EVO > EXBOX 3001 > ACC_CIC = aktiv
HU_NBT_EVO > EXBOX 3001 > ACC_SGN = aktiv
HU_NBT_EVO > EXBOX 3001 > CTA = both
HU_NBT_EVO > EXBOX 3001 > DCC = nicht_aktiv [Default]
HU_NBT_EVO > FES 3008 > ECO_CONF_LIGHT_SIGHT = sicht [Default]
HU_NBT_EVO > HUD 300C > HUD_5_5_2 = nicht_aktiv [Default]
HU_NBT_EVO > HUD 300C > HUD_CB_ABSTANDSINFO = nicht_aktiv [Default]
HU_NBT_EVO > HUD 300C > HUD_CB_TEMPOLIMIT = nicht_aktiv [Default]
HU_NBT_EVO > HUD 300C > HUD_DISTANCE_INFO = nicht_aktiv [Default]
HU_NBT_EVO > KOMBI 300D > KI_DISP_CB_ADDITIONAL_SIGN = aktiv
HU_NBT_EVO > KOMBI 300D > KI_DISP_CB_BC_RANGE_ENABLE = aktiv
HU_NBT_EVO > KOMBI 300D > KI_DISP_CB_FAHRMODUSANSICHT = aktiv
HU_NBT_EVO > KOMBI 300D > KI_DISP_CB_HMI_BC_SOC_ENABLE = nicht_aktiv [Default]
HU_NBT_EVO > KOMBI 300D > KI_DISP_CB_TACHOZEIGERBAND = aktiv
HU_NBT_EVO > KOMBI 300D > KI_KOMBI_VARIANT = mid_35up_oabr
HU_NBT_EVO > SARAH 300A > AUFFAHRWARNUNG = gen_2
HU_NBT_EVO > SARAH 300A > AUTOTEMPOMAT = nicht_aktiv [Default]
HU_NBT_EVO > SARAH 300A > PERSONENWARNUNG_TAGS = gen_1
HU_NBT_EVO > SARAH 300A > SEITENKOLLISIONSWARNUNG = gen_1
HU_NBT_EVO > SARAH 300A > SPURVERLASSENSLENKEINGRIFF = gen_1
HU_NBT_EVO > SARAH 300A > SPURVERLASSENSWARNUNG = gen_1
HU_NBT_EVO > SARAH 300A > SPURWECHSELLENKEINGRIFF = gen_1
HU_NBT_EVO > SARAH 300A > SPURWECHSELWARNUNG = gen_1
HU_NBT_EVO > SARAH 300A > VIBRATIONSSTAERKE = gen_1
HU_NBT_EVO > SARAH 300A > VORFAHRTSWARNUNG = nicht_aktiv [Default]

<<< CAFD_00002660.caf.007_003_011 (Kombi) >>>
Kombi > Analoge_Zeiger 3003 > GESCHWINDIGKEIT_ANZ_Y = bmw
Kombi > Anzeige_Konfiguration 3000 > ADDITIONAL_SIGN_ENABLE = nicht_aktiv [Default]
Kombi > Anzeige_Konfiguration 3000 > Anzeige_Konfiguration_106_106_2 = nicht_aktiv [Default]
Kombi > Anzeige_Konfiguration 3000 > Anzeige_Konfiguration_106_106_4 = nicht_aktiv [Default]
Kombi > Anzeige_Konfiguration 3000 > CB_FAHRMODUSANSICHT = aktiv
Kombi > Anzeige_Konfiguration 3000 > CB_NAVI = nicht_aktiv [Default]
Kombi > Anzeige_Konfiguration 3000 > CB_PRESELECT_ALLES_EIN = aktiv
Kombi > Anzeige_Konfiguration 3000 > CB_PRESELECT_BERUHIGUNG = aktiv
Kombi > Anzeige_Konfiguration 3000 > CB_PRESELECT_INDIVIDUAL = aktiv
Kombi > Anzeige_Konfiguration 3000 > CB_SLI_NPI = nicht_aktiv [Default]
Kombi > Anzeige_Konfiguration 3000 > CB_TACHOZEIGERBAND = nicht_aktiv [Default]
Kombi > Anzeige_Konfiguration 3000 > HMI_SHIFTLIGHTS_HUD_ENABLE = nicht_aktiv [Default]
Kombi > Anzeige_Konfiguration 3000 > HUD_NO_PASSING_ENABLE = nicht_aktiv [Default]
Kombi > Anzeige_Konfiguration 3000 > HUD_SPEED_LIMIT_ENABLE = nicht_aktiv [Default]
Kombi > Anzeige_Konfiguration 3000 > LDM_HUD_ABSTAND_ENABLE = nicht_aktiv [Default]
Kombi > Anzeige_Konfiguration 3000 > LDM_ISA_ENABLE = nich_aktiv [Default]
Kombi > Anzeige_Konfiguration 3000 > LDM_STA_ENABLE = aktiv
Kombi > Anzeige_Konfiguration 3000 > LDM_STA_HUD_ANZ_ENABLE = nicht_aktiv [Default]
Kombi > Anzeige_Konfiguration 3000 > LDM_TIP_ENABLE = nicht_aktiv [Default]
Kombi > Anzeige_Konfiguration 3000 > LDM_WBK_AKUT_ENABLE = aktiv
Kombi > Anzeige_Konfiguration 3000 > LDM_WBK_AKUT_HUD_ANZ_ENABLE = nicht_aktiv [Default]
Kombi > Anzeige_Konfiguration 3000 > LDM_WBK_VORW_ENABLE = aktiv
Kombi > Anzeige_Konfiguration 3000 > LDM_WBK_VORW_HUD_ANZ_ENABLE = nicht_aktiv [Default]
Kombi > Anzeige_Konfiguration 3000 > LDM_XCC_ENABLE = acc
Kombi > Anzeige_Konfiguration 3000 > NIVI_ENABLE = aktiv
Kombi > Anzeige_Konfiguration 3000 > NO_PASSING_ENABLE = nicht_aktiv [Default]
Kombi > Anzeige_Konfiguration 3000 > SPEED_LIMIT_ENABLE = inaktiv [Default]
Kombi > Anzeige_Konfiguration 3000 > STA_ANIMATION_LENKRAD_ENABLE = aktiv
Kombi > Anzeige_Konfiguration 3000 > STA_ANIMATION_LINIE_ENABLE = aktiv
Kombi > Anzeige_Konfiguration 3000 > TACHOZEIGERBAND_ENABLE = nicht_aktiv [Default]
Kombi > Anzeige_Konfiguration 3000 > TLC_ENABLE = aktiv
Kombi > ERM_Konfiguration 3004 > DEBUG_SAFETY = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > DISP_DRASY_LAG_ALIVE = aktiv
Kombi > ERM_Konfiguration 3004 > DISP_DRASY_LAG_APPL = aktiv
Kombi > ERM_Konfiguration 3004 > DISP_DRASY_LAG_CRC = aktiv
Kombi > ERM_Konfiguration 3004 > DISP_DRASY_LAG_TIMEOUT = aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_59_59_1 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_59_59_128 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_59_59_16 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_59_59_2 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_59_59_32 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_59_59_4 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_59_59_64 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_59_59_8 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_60_60_1 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_60_60_128 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_60_60_16 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_60_60_2 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_60_60_32 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_60_60_4 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_60_60_64 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_60_60_8 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_61_61_1 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_61_61_128 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_61_61_16 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_61_61_2 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_61_61_32 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_61_61_4 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_61_61_64 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_61_61_8 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_62_62_1 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_62_62_16 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_62_62_2 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_62_62_32 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_62_62_4 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_62_62_64 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > ERM_Konfiguration_62_62_8 = nicht_aktiv
Kombi > ERM_Konfiguration 3004 > FE_INDIGO2WD_EXPIRED = aktiv
Kombi > ERM_Konfiguration 3004 > RCOG_TRSG_APPL = nicht_aktiv [Default]
Kombi > ERM_Konfiguration 3004 > RCOG_TRSG_TIMEOUT = nicht_aktiv [Default]
Kombi > FuBi_Parameter 3005 > CC_KL_PREDRIVE_F17_STA = aktiv
Kombi > FuBi_Parameter 3005 > CC_KL_PREDRIVE_F25_TLC = aktiv
Kombi > FuBi_Parameter 3005 > CC_KL_PREDRIVE_F26_WBK_PERSON = inaktiv
Kombi > FuBi_Parameter 3005 > CC_KL_PREDRIVE_F9_ACC = aktiv
Kombi > KI_Parameter 3001 > BLINKER_GESCHWINDIGKEIT = volume_y_kl
Kombi > KI_Parameter 3001 > BLINKER_VOLUME = volume_y_kl
Kombi > PIA_Einheiten 3007 > PIA_FAHRMODUSANSICHT = aktiv
Kombi > PIA_Einheiten 3007 > PIA_FAHRMODUSANSICHT_PORTIERUNG = aktiv
Kombi > PIA_Einheiten 3007 > PIA_HUD_IBRAKE_ABSTANDSINFO = nicht_aktiv [Default]
Kombi > PIA_Einheiten 3007 > PIA_HUD_IBRAKE_ABSTANDSINFO_PORTIERUNG = nicht_aktiv [Default]
Kombi > PIA_Einheiten 3007 > PIA_HUD_MVIEW_SLI_NPI = nicht_aktiv [Default]
Kombi > PIA_Einheiten 3007 > PIA_HUD_MVIEW_SLI_NPI_PORTIERUNG = nicht_aktiv [Default]
Kombi > PIA_Einheiten 3007 > PIA_HUD_SLI = nicht_aktiv [Default]
Kombi > PIA_Einheiten 3007 > PIA_HUD_SLI_NPI = nicht_aktiv [Default]
Kombi > PIA_Einheiten 3007 > PIA_HUD_SLI_PORTIERUNG = nicht_aktiv [Default]
Kombi > PIA_Einheiten 3007 > PIA_HUD_STA = nicht_aktiv [Default]
Kombi > PIA_Einheiten 3007 > PIA_HUD_STA_PORTIERUNG = nicht_aktiv [Default]
Kombi > PIA_Einheiten 3007 > PIA_HUD_VSLI = nicht_aktiv [Default]
Kombi > PIA_Einheiten 3007 > PIA_PRESELECT = wert_01
Kombi > PIA_Einheiten 3007 > PIA_PRESELECT_MASKE = wert_01
Kombi > PIA_Einheiten 3007 > PIA_PRESELECT_PORTIERUNG = aktiv
Kombi > PIA_Einheiten 3007 > PIA_SLI_NPI = nicht_aktiv [Default]
Kombi > PIA_Einheiten 3007 > PIA_SLI_NPI_PORTIERUNG = nicht_aktiv [Default]
Kombi > PIA_Einheiten 3007 > PIA_TACHOZEIGERBAND = nicht_aktiv [Default]
Kombi > PIA_Einheiten 3007 > PIA_TACHOZEIGERBAND_PORTIERUNG = nicht_aktiv [Default]

<<< CAFD_000030FF.caf.004_023_006 (RS) >>>
RS > RECW_Function 300B > C_RECW_Type = only_warning
RS > SystemConfiguration 3000 > C_AWA_ENABLED = Enabled
RS > SystemConfiguration 3000 > C_BLIS_ENABLED = Enabled
RS > SystemConfiguration 3000 > C_CFG_Sensor = 4SensorSystem
RS > SystemConfiguration 3000 > C_FCTA_ENABLED = Enable
RS > SystemConfiguration 3000 > C_FREESPACE_ENABLED = Enabled
RS > SystemConfiguration 3000 > C_OBJECT_LIST_ENABLED = Enabled
RS > SystemConfiguration 3000 > C_RCTA_ENABLED = Enable
RS > SystemConfiguration 3000 > C_RECW_ENABLED = Enable
RS > SystemConfiguration 3000 > C_SWW_ENABLED = Enabled
RS > VehicleIntegrationAngleCorrection 3003 > C_Sensor_FL_angle_correction_array = unknown
RS > VehicleIntegrationAngleCorrection 3003 > C_Sensor_FR_angle_correction_array = unknown
RS > VehicleIntegrationAngleCorrection 3003 > C_Sensor_RL_angle_correction_array = unknown
RS > VehicleIntegrationAngleCorrection 3003 > C_Sensor_RR_angle_correction_array = 4SensorSystem
12-04-2018, 13:47 PM,
Post: #8
RE: G-series - Coding Automatic Lane Change SPURWECHSELASSISTENT
simpaty, do you mean your car has 5AT, but doesnt have the BLIND spot warning? May I know do you have two triangle lights on your mirrors?
13-04-2018, 05:03 AM, (This post was last modified: 13-04-2018, 05:03 AM by simpaty.)
Post: #9
RE: G-series - Coding Automatic Lane Change SPURWECHSELASSISTENT
Hello there, I do have the blind spot. I am talking about lane change assist, the new bmw system that allows an automatic lane change just by simply using your blinker.
13-04-2018, 06:28 AM,
Post: #10
RE: G-series - Coding Automatic Lane Change SPURWECHSELASSISTENT
(12-04-2018, 10:54 AM)simpaty Wrote:  there is no impact of these 2 codes that look like change lane assist.
However, this is the impactof 5At on my modules, trying to locate which one looks like the incriminated one which blocks Lane Change Assistant.

If you want more accurate analysis, create NCD's with E-sys Coding-Verification and then use NCD / CAFD tool to compare.




Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW BMW F34 LHD to RHD heated seats retrofit coding Schnitzer 2 16 1 hour ago
Last Post: Schnitzer
  Making F-series combox work in e-series Ryn079 1 166 11 hours ago
Last Post: Marx
  BMW F10 RHD to LHD coding? morto 10 1,226 Yesterday, 06:57 AM
Last Post: muskatas
XZBMW G15 remember last driving mode & ECO PRO MSA memory coding duss46 7 342 26-03-2024, 18:56 PM
Last Post: duss46
XZBMW coding g12 remote key /m display redog4dy 5 196 26-03-2024, 07:23 AM
Last Post: Siki78
  Some news, secure coding coming to new bikes :/ Node 8 1,016 25-03-2024, 15:13 PM
Last Post: RuleNormaliai
  BMW e39 530d 2001 problem after MAF change boweld11 3 106 24-03-2024, 22:44 PM
Last Post: SkeYT
  [Question] Change X1 F48 gearbox jaramillo 9 1,373 24-03-2024, 21:27 PM
Last Post: masa52
  Need help coding out SOS BMW E60 tigre 8 200 24-03-2024, 21:25 PM
Last Post: jararak
  Engine swap E60 535d --> E61 530d coding advice requested Stratofortress 9 307 23-03-2024, 14:59 PM
Last Post: Simoniak

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content