Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Audi MIB2 Serial Connection over Quadlock / Board
05-09-2019, 19:18 PM,
Post: #1
Audi MIB2 Serial Connection over Quadlock / Board
I have two MIB2 Units. One AU57x MIB2 on K3663 and one from Q7 with MIB2 AUG22.

There is something going around where you patch the MIBRoot Application, but if something goes wrong, serial access is needed (not telnet!)

On the AU57X MIB2 it already gone wrong and MIB2 booting only with Audi Logo and ethernet Adapter has lights, but telnet is closing the connection itself. For recovery a Serial Connection over USB UART/TTL Adapter to the J5 / RCC Area is needed. 

I found a Image of a VW Discover Pro MIB2/Porsche PCM an here it shows at B3 and B9 the Connection to J5. This is not working on the AUG22 Unit and on the AU57x not tested till now. 

[Image: mib2-wiring-b2edb871d27541030fbdd66275bc...3b16c3.jpg]

Today i removed the blue and green plugs from quadlock on AUG22 MIB2, and tested all pins which are not used to receive some output, but found nothing. (Only RX/GND on TTL Adapter used to find) 

Does somebody know, if there are pins on the quadlock for j5/rcc for one of this Units? And when which Pins are the right ones?

Also removed the board from the case of the AU57x Unit. There are also two PCI-Express like ports one with J5/V850 writing on it. Maybe someone knows here, which pins are the right ones to connect? GND is not the problem to find but rx,tx

If my answer helped to fix anything, then don't forget to give me some rep please! 
Quote this message in a reply
06-09-2019, 10:36 AM,
Post: #2
RE: Audi MIB2 Serial Connection over Quadlock / Board
Your pinout is correct - blue connector (block B) pin 3 and 9. Connect GND of usb-serial converter to pin 7.



(05-09-2019, 19:18 PM)PopDog Wrote:  I have two MIB2 Units. One AU57x MIB2 on K3663 and one from Q7 with MIB2 AUG22.

There is something going around where you patch the MIBRoot Application, but if something goes wrong, serial access is needed (not telnet!)

On the AU57X MIB2 it already gone wrong and MIB2 booting only with Audi Logo and ethernet Adapter has lights, but telnet is closing the connection itself. For recovery a Serial Connection over USB UART/TTL Adapter to the J5 / RCC Area is needed. 

I found a Image of a VW Discover Pro MIB2/Porsche PCM an here it shows at B3 and B9 the Connection to J5. This is not working on the AUG22 Unit and on the AU57x not tested till now. 

[Image: mib2-wiring-b2edb871d27541030fbdd66275bc...3b16c3.jpg]

Today i removed the blue and green plugs from quadlock on AUG22 MIB2, and tested all pins which are not used to receive some output, but found nothing. (Only RX/GND on TTL Adapter used to find) 

Does somebody know, if there are pins on the quadlock for j5/rcc for one of this Units? And when which Pins are the right ones?

Also removed the board from the case of the AU57x Unit. There are also two PCI-Express like ports one with J5/V850 writing on it. Maybe someone knows here, which pins are the right ones to connect? GND is not the problem to find but rx,tx
Reputation: +1 - PopDog [+1]
Quote this message in a reply
[+] 1 user says Thank You to mft133 for this post
30-09-2019, 21:33 PM,
Post: #3
RE: Audi MIB2 Serial Connection over Quadlock / Board
Any luck with this?

(05-09-2019, 19:18 PM)PopDog Wrote:  I have two MIB2 Units. One AU57x MIB2 on K3663 and one from Q7 with MIB2 AUG22.

There is something going around where you patch the MIBRoot Application, but if something goes wrong, serial access is needed (not telnet!)

On the AU57X MIB2 it already gone wrong and MIB2 booting only with Audi Logo and ethernet Adapter has lights, but telnet is closing the connection itself. For recovery a Serial Connection over USB UART/TTL Adapter to the J5 / RCC Area is needed. 

I found a Image of a VW Discover Pro MIB2/Porsche PCM an here it shows at B3 and B9 the Connection to J5. This is not working on the AUG22 Unit and on the AU57x not tested till now. 

[Image: mib2-wiring-b2edb871d27541030fbdd66275bc...3b16c3.jpg]

Today i removed the blue and green plugs from quadlock on AUG22 MIB2, and tested all pins which are not used to receive some output, but found nothing. (Only RX/GND on TTL Adapter used to find) 

Does somebody know, if there are pins on the quadlock for j5/rcc for one of this Units? And when which Pins are the right ones?

Also removed the board from the case of the AU57x Unit. There are also two PCI-Express like ports one with J5/V850 writing on it. Maybe someone knows here, which pins are the right ones to connect? GND is not the problem to find but rx,tx
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
ZTAudi 2012 Audi A1 MMI component security help sparky001 3 345 8 hours ago
Last Post: m4k4r0v
ZTAudi Audi MMI 3G Map 6.36.0 8R0051884KL 2023 atomantmk 33 10,810 Yesterday, 09:14 AM
Last Post: B66B
  GET YOUR BLAUPUNKT CODE FROM SERIAL CAD.123 128 77,785 26-03-2024, 17:58 PM
Last Post: matuuu
RHonda HONDA/ACURA Code By VIN/Serial volavka 801 318,956 26-03-2024, 08:59 AM
Last Post: Shooting
ZTAudi Audi RMC Navigation Maps 2024 Europa atomantmk 4 540 17-03-2024, 20:28 PM
Last Post: Iceman87
ZTAudi Problem with Audi MMI3GP - no sound kafkaesk 5 179 16-03-2024, 19:51 PM
Last Post: PopDog
  Solved ✔ audi a6b7 mib2 firmware needed skyrimzz 3 124 13-03-2024, 12:03 PM
Last Post: skyrimzz
XSMini CHRYSLER RADIO CODE BY SERIAL diddygy 503 174,211 09-03-2024, 18:12 PM
Last Post: pitgamy
ZTAudi Audi MIB2 MHS2 2024 Navigation Maps daserds 6 591 03-03-2024, 22:00 PM
Last Post: m_fife
ZTAudi Audi MIB3 2024 Navigation Maps (+Porsche Lambo VW Touareg Bentley) daserds 4 376 02-03-2024, 11:35 AM
Last Post: cicoe

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content