[fab]

Hello People,

For testing purposes I need to get rid of some dtc's.
Would someone be so kind to help since I am unable to do it with DTC Remover (although the ecu is listed...).
Also not possible with VAG DTC remover.

- VW transporter T4 2000.
- EDC15VM+ / 29F400BT
- DTC_OFF:
P1631(18039) P1632(18040) P1146(17554) P1145(17553) P1654(180062)

pls also checksum corrected (if possible)
tnx a lot!

PS: I want to do this myself with winols:
- find 5 digits vag code dtc in hexdump
- change the 3 block of codes before the fault code to certain values (error time, heal time etc.)
- calc checksum

Can someone pls confirm that this is the right procedure? (or am I talking bull***)

[tale]

Hello People,

For testing purposes I need to get rid of some dtc's.
Would someone be so kind to help since I am unable to do it with DTC Remover (although the ecu is listed...).
Also not possible with VAG DTC remover.

- VW transporter T4 2000.
- EDC15VM+ / 29F400BT
- DTC_OFF:
P1631(18039) P1632(18040) P1146(17554) P1145(17553) P1654(180062)

pls also checksum corrected (if possible)
tnx a lot!

PS: I want to do this myself with winols:
- find 5 digits vag code dtc in hexdump
- change the 3 block of codes before the fault code to certain values (error time, heal time etc.)
- calc checksum

Can someone pls confirm that this is the right procedure? (or am I talking bull***)

Hello
Transporter T4 DTC
Pass PM
If I helped, don't forget to press Thanks

[fab]

Hello
Transporter T4 DTC
Pass PM
If I helped, don't forget to press Thanks

wow tnx mate! I ll try&report..
(I assume chksum is ok?)

---

Strange... the mod file wont load into flash "error writing file".
I tried a cupple of times. Gets error at 73% every single time...

While writing back ori flash with no error..
What could that be?

[fab]

kess obd write...OK.
file tested and OK. tnx!

admin pls close. problem solved