Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ BMW E64 disabling active steering
16-04-2018, 17:39 PM,
(This post was last modified: 16-04-2018, 17:47 PM by rs@chip.)
Post: #11
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
(16-04-2018, 14:05 PM)Silva1337 Wrote: as i know steering gear should replaced abs module too did you managed turn it off without any changing of partS? Silva1337 you think it is not posible turn off like change from DSCA to DSC? kmodel99 can you explane step by step doing it?thanks in advance |
|||
16-04-2018, 18:16 PM,
Post: #12
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
i have try but not find the file .0da, but have .0pa .ipo in my system. have any idea where i can finf the file a6769705.0da
ALfio |
|||
16-04-2018, 18:19 PM,
Post: #13
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
705 softt from another type of abs module - withouts afs
its the way i tell you guys 705 fromd DSC60 family , his old one from DSCA60 how i know you cant flash software from another one family so - need to change abs module 100% |
|||
16-04-2018, 19:22 PM,
Post: #14
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
Old program was from DSCA60 family, new is from DSC60 (A - aktive steering???). So just choose DSC60 with same numbers at beginning (just last digit should be other). Then flash it. To do it you need use WINKFP in ExpertMode. Also you should do steering angle adaptation.
Next part is in ncsexpert, just remove FA code from FA and code KOMBI, SZL, SGM. It should be enough. If not also code to nicht aktiv in KOMBI any AFS, Aktivesteering, aktive_steering etc. Then remove F04 fuse from glove box fuse box (40A, 4th from left , very big one). Then remove faults and job should be done. I didn’t change any parts! Dsc module is original with aktive steering, just flashed with program without aktive steering. BMW Coding Programming Retrofitting
Mercedes Benz Coding Retrofitting Online help by TeamViewer CID Changeable SD cards! 100% working! |
|||
16-04-2018, 19:38 PM,
(This post was last modified: 16-04-2018, 19:51 PM by Silva1337.)
Post: #15
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
Could you give tutorial for expert mode i have friend with this problem i will try myself
which ipo and prg i should choose what is index adress? |
|||
16-04-2018, 19:53 PM,
Post: #16
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
I have already removed the code fa and recoded dsc, kombi, szl, but I can not turn off the indicator for the steering angle. I tried to encode the dsc in comfort mode but can not do, if I understand correctly I have to code with winkft in expert mode. I can not find the file ending in .0da
|
|||
17-04-2018, 06:20 AM,
Post: #17
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
(16-04-2018, 19:38 PM)Silva1337 Wrote: Could you give tutorial for expert mode i have friend with this problem i will try myself Just use google, search for WinKFP expert mode. I think if your group is DSCA60 so use DSC60 and choose number which is closer to you (only last digits are other). Then you will know which file to choose and which address. (Mine was 29 as I remember but I’m not sure). (16-04-2018, 19:53 PM)alfio76 Wrote: I have already removed the code fa and recoded dsc, kombi, szl, but I can not turn off the indicator for the steering angle. I tried to encode the dsc in comfort mode but can not do, if I understand correctly I have to code with winkft in expert mode. I can not find the file ending in .0da You mean steering angle - DSC indicator (which flash when wheels are slipping?) or steering indicator (steering wheel with !, error for active steering). What error do you have on CCC, CIC? DSC error or active steering error? If you code car correctly and remove fuse for AFS (active steering), then only error should be DSC indicator. Then you need to flash DSC with proper software. And if you do flashing in WinKFP it stuck on 100% and “not responding”, just wait few minutes then close WinKFP, fee ignition cycle and it should start working. You don’t need use 0da file (which is for DATA), DSC doesn’t have it, just skip it. If you need I can help you by TeamViewer. I gave you a lot of hints. I’ve just get “maybe try flash DSC module with software without AFS” and I need to do some research on my own. So I found and just try. BMW Coding Programming Retrofitting
Mercedes Benz Coding Retrofitting Online help by TeamViewer CID Changeable SD cards! 100% working! |
|||
17-04-2018, 07:20 AM,
Post: #18
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
ill try but what about wheel hardeness after programming off?
|
|||
17-04-2018, 07:59 AM,
Post: #19
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
(17-04-2018, 07:20 AM)Silva1337 Wrote: ill try but what about wheel hardeness after programming off? If you mean “power of power steering” then I think it’s need a bit more effort. But it is working now like normal hydraulic power steering (I think it’s similar because I very rare driving car with hydro). But it is acceptable. BMW Coding Programming Retrofitting
Mercedes Benz Coding Retrofitting Online help by TeamViewer CID Changeable SD cards! 100% working! |
|||
17-04-2018, 08:25 AM,
Post: #20
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
ok, I just have error dsc as soon as I have time I try the programming in expert mode of the dsc, I downloaded from google a manual for programming in expert mode and make the example with the engine control unit that also requested the 0da file for this I thought I needed it.
thank you |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content